icon Skip to content
Financing Available

Option to split your payments over time

Great Discounts

Your favorite products on sale

Expert Assistance

Need help? Give us a call at +1 888 575-2099

Quality Assurance

Manufacturer's warranty on most items

Benehike 270° Freestanding Batwing Awning with LED Lights, 8.2' ft, Gen 3

SKU BH-SK2725-130 Square Feet-Driver Side-With LED Lights
Save 10% Save 10%
Original price $799.00
Original price $799.00 - Original price $799.00
Original price $799.00
Current price $719.99
$719.99 - $719.99
Current price $719.99
  • CLEARANCE SALE.

  • ITEMS LEFT.

  • PEOPLE are also watching that product.


The BENEHIKE Gen3 270 Freestanding Awning offers 130 square feet of shading, effortlessly deploying or retracting in just 30 seconds.

It seamlessly integrates with almost any rack or crossbar setup. Innovatively embedded within the Z-shaped arms are three 60-inch LED light bars, providing unhindered illumination even in the darkness of the night.

  • Three 60-inch long LED light bars, controlled via a central panel. Seamlessly integrated within the Z-shaped arms
  • Robust 600D & 280GSM Poly-Cotton Ripstop Awning Fabric
  • Waterproof 1000G PVC Travel Cover with Heavy-Duty YKK Zippers & Umbrella Cord
  • 130 Square Feet of Independent Covered Shelter
  • Enhanced Reinforced L-Shaped Bracket, Compatible with 99% of Racks or Bars
  • Z-Groove Aluminum Arms for Optimal Strength with Adequate Light Transmission
  • 4 Aluminum Extension Poles, Conveniently Stored within Awning Arms
  • Reliable Tie-Down Points for Poles and Efficient Water Runoff, Ensuring Optimal Structural Support
  • 1 High-Strength Webbing Strap for Securing the Awning's Tail
  • Includes Guy Ropes, Steel Tent Pegs, and an Accessory Storage Bag
  • Travel Cover
  • 3 Rotating and Telescoping Aluminum Poles
  • 4 Sets of Shock Cords
  • 4 Heavy-Duty Pegs
  • 2 Heavy-Duty Mounting Brackets and Hardware
  • 2 Heavy-Duty Ratchet Straps
  • Ratchet Wrench and Regular Wrench

Note: This awning can only be installed on the driver's side of the vehicle.

Shade: 130 ft³
Closed Dimensions: 88 L x 7 Wx 5 H inch
Adjustable Height: 78.7 inch
Overall Dimension: 113 x 79 inch
Cover Dimension: 98 L x 7.4 W x 6 H inch

Awning Material: Rip-Stop 600D Oxford, 280GSM Cotton, 4000mm PU Coating, Anti-UV 50+
Cover: 1000D PVC, 4000mm PU Coating, Anti-UV 50+
Frame: Black Powder-Coated Aluminum Alloy
Support Arms: Black Powder-Coated Aluminum Alloy
Zippers: YKK
Actual Weight: 59.8 lbs

Installation Hardware

  • Metric Wrench 10/13 mm *2
  • Double wholes washer *2
  • 20mm Stainless Steel M8 Bolt *4
  • 55mm Stainless SteelM8 Bolt *4
  • M8 Self-Locking Nut *8
  • String *3
  • Tent Pegs *3
  • Stroge Bag *1
  1. Peel the PVC cover back at each end of theawning to expose the backing plate tracks. Insert the bolts heads into the backing plate tracks,thenreattach the PVC end covers.
  2. Position and attach the brackets in the required positionusing the provided nuts and washers,then tighten.
  3. Mount to the vehide using the provided U-bolts, nuts and washers.
  1. Unzip the PVC cover and fold it back from the awning fabric
  2. Undo the three supporting straps and release the awning fabric.
  3. Take note of how the fabric is layered and packed to assist you with repacking the awning
  4. Swing the arms away from the awning until the fabric is fullyextended towards the front and rear of the vehicle. Use the tensioning strap to secure the awning in position at the front and rear of the vehicle.
  5. If being used in adverse weather conditions or if additionalstability is required, release the support poles attached to the swinging arms and adjust the pole height to the ground,then attach the provided guy lines and stakes for maximum support.
  6. Should it rain while your 270° awning is deployed,it is recommended that the support poles height is adjusted to allow a slight slope of the fabric,along with adjustment of the provided guy lines,allowing a "valley"to be formed between each swinging support arm. This will channel the water away from your vehicle and prevent excess weight sitting on the awning fabric overhead.

NOTE
lt is recommended that the awning is assembled and installed by two (2) people. We further recommend having theawning installed by experienced 4x4 accessory installer.The awning brackets supplied have been designed to fit the most common configurations of roof racks and railsystems.
However, due to the ever-increasing variations being offered by vehicle and accessory manufacturers, wecannot guarantee that these will fit all available options.
It is recommended that you speak to your roof rackspecialist for further advise or recommendations on thebest system for your requirements.
Ensure that the minimum spacing between themounting brackets is to be 47” (1200mm) to allow theawning to be supported correctly and the weight isdistributed evenly.

Order shipment preparation takes 3 days. Once shipped orders usually take 2 weeks to be delivered. These are estimations; delivery can be delayed for reasons beyond our control. You can always contact us to know the exact delivery time once you placed an order with us. Have a look at our shipping policy here.