{"product_id":"aims-power-8000-watt-pure-sine-inverter-charger-etl-listed","title":"Aims Power 8000 Watt 48V Pure Sine Inverter Charger ETL Listed - PICOGLF80W48V240VS","description":"\u003ch2\u003eAims Power 8000 Watt 48V Pure Sine Inverter Charger ETL Listed - PICOGLF80W48V240VS\u003c\/h2\u003e\n\u003cp\u003eOur line of ETL listed to UL 1741 Standards 48 Volt DC to 120\/240 Volt AC inverter chargers is the power house for back up, off grid systems. Built with a 48 Volt DC input, these inverter chargers perform with very little power loss. Users receive a notable increase in efficiency in large systems when compared to using inverters that accept 12 or 24 volts. This can be an attractive feature for sustainability lovers looking to live as efficiently as possible. The most common use for this inverter is emergency backup power for residences and businesses. You’ll always be prepared for the next power outage with access of up to 12,000 watts (depending on model) of continuous power and 36,000 watts of surge (for up to 20 seconds). We recommend recharging your battery bank with AIMS Power solar panels — a cleaner form of power. One of the most sought-after features this inverter has is the direct-connect terminal block, which allows users to surpass the 8Kw or 12Kw capacity and harness its 300% surge power (up to 24Kw or 36Kw watts for 20 seconds as previously noted). Have a hunting cabin or off-grid vacation home? This AIMS Power inverter charger is perfect for supplying reliable electricity to the entire house. This inverter is also built to withstand reasonable heat and temperature fluctuations because of its over-temperature protection and dual thermally-controlled fans. And it’s protected from humidity or airborne dust and dirt by virtue of its marine-coated (or “conformal-coated”) boards. This inverter provides the reliability needed in any business or residential emergency backup power application. The inverter is a split-phase and will output 110\/120 or 220\/230\/240 Vac, and it can output 50 or 60Hz via the SW4 dipswitch on the DC side of the product. This means that this inverter works internationally and is operable with nearly any electrical system on the planet! This beast of an inverter can pretty much get any job done imaginable. The development of this new DC-to-AC inverter technology puts this product in high demand among AIMS Power customers. When you purchase a low frequency inverter charger from AIMS Power, you’re getting our top-of-the-line product offering. The unit is repairable, and we stand behind it with a free two-year warranty and tech support. Make a step in the right direction when it comes to preserving this beautiful planet by choosing an inverter powered by renewable energy when building your next electrical system.\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e8000 Watt low frequency inverter 110\/120\/220\/230\/240 Vac Split Phase\u003c\/li\u003e\n\u003cli\u003e24000 Watt surge for 20 seconds -3x surge capability\u003c\/li\u003e\n\u003cli\u003eETL Listed to UL 1741 Standards\u003c\/li\u003e\n\u003cli\u003eCSA STDC 22.2 NO.107.1\u003c\/li\u003e\n\u003cli\u003eBattery priority selector\u003c\/li\u003e\n\u003cli\u003eAC direct connect terminal block\u003c\/li\u003e\n\u003cli\u003eMarine coated and protected\u003c\/li\u003e\n\u003cli\u003eMulti stage smart charger 80 Amp charges GEL, Lead, AGM, Lithium\u003c\/li\u003e\n\u003cli\u003eThree cooling fans - thermal and load based\u003c\/li\u003e\n\u003cli\u003eRemote panel available\u003c\/li\u003e\n\u003cli\u003e60hz or 50 hz selectable dip switch\u003c\/li\u003e\n\u003cli\u003e10msec typical transfer time\u003c\/li\u003e\n\u003cli\u003eMounting plate included\u003c\/li\u003e\n\u003cli\u003eSelectable 25W power save mode (hibernation)\u003c\/li\u003e\n\u003cli\u003e8 battery charger settings\u003c\/li\u003e\n\u003cli\u003e4 stage battery charger\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eContinuous Output Power: 8000 Watts\u003c\/li\u003e\n\u003cli\u003eSurge Rating: 24000 Watts (20 Seconds)\u003c\/li\u003e\n\u003cli\u003eOutput Waveform: Pure Sine\/Same as input (Bypass Mode)\u003c\/li\u003e\n\u003cli\u003e100-110-120Vac \/ 220-230-240Vac\u003c\/li\u003e\n\u003cli\u003eNominal Efficiency: \u0026gt;88% (Peak)\u003c\/li\u003e\n\u003cli\u003eLine Mode Efficiency: \u0026gt;95%\u003c\/li\u003e\n\u003cli\u003eOutput Frequency: 50Hz +\/- 0.3Hz \/ 60Hz +\/- 0.3Hz\u003c\/li\u003e\n\u003cli\u003eTypical Transfer Time: 10ms (Max)\u003c\/li\u003e\n\u003cli\u003eTHD: \u0026lt; 7% under full linear load\u003c\/li\u003e\n\u003cli\u003eAmbient operating temperature: 14°F to 122°F (-10°C to 50°C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eWhat our Experts Think  \u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eReliable 1500W pure sine inverter\/charger\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e delivers clean 120V AC power with integrated battery charging in a single compact unit.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eETL listed certification\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e adds confidence in safety compliance and suitability for residential, RV, and off-grid applications.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003ePure sine wave output\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e ensures stable operation for sensitive electronics, medical devices, and everyday appliances.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eBuilt-in multi-stage charger\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e provides efficient and controlled battery charging when connected to shore power or generator input.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eAutomatic transfer switch functionality\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e enables seamless switching between grid\/generator and battery power without interruption.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003e12V DC compatibility\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e makes it a strong fit for RVs, boats, vans, and small solar energy systems.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eHigh surge capability\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e supports short bursts of demand from appliances like refrigerators, pumps, and small tools.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan\u003eAll-in-one power management solution\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e designed for users needing reliable backup power, mobility, and simplified system integration.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003e                 \u003cbr\u003eQ\u0026amp;A    \u003c\/h5\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eQ: What is the AIMS Power PICOGLF15W12V120V used for?\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eA: Aims Power 1500 Watt Pure Sine Inverter Charger - ETL Listed - PICOGLF15W12V120V is an inverter, battery charger, and automatic transfer switch designed for RVs, boats, cabins, and backup power systems.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eQ: What does “ETL Listed” mean?\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eA: ETL Listing means the unit has been independently tested for safety standards, ensuring compliance with recognized electrical safety requirements for North American use.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eQ: What power output does it provide?\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eA: It delivers 1500W continuous power with surge capability for short-term startup loads like small motors and appliances.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eQ: What type of power does it produce?\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eA: It produces pure sine wave output, delivering clean, utility-grade power suitable for sensitive electronics and household devices.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eQ: Does it include a battery charger?\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eA: Yes. It includes a multi-stage charger that can recharge batteries when connected to shore power or a generator.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eQ: What is the benefit of an inverter charger?\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eA: It combines inverter, charger, and transfer switch functions in one unit, allowing automatic switching between battery and external AC power sources.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eQ: What systems is it compatible with?\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eA: It is designed for 12V battery systems commonly used in RVs, marine applications, and small off-grid setups.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eQ: What devices can it run?\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eA: It can power laptops, TVs, lighting, fans, routers, and small appliances within its 1500W capacity.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eQ: Why choose this ETL-listed model?\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eA: The ETL certification adds an extra layer of verified safety compliance, making it suitable for installations requiring certified electrical equipment.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e               \u003cbr\u003eMaintenance Tips  \u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eInstall in a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ecool, dry, and dust-free electrical space\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e with strong airflow to support continuous high-load operation.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eKeep \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eall cooling fans, vents, and heat sinks clean\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e; this 8kW unit uses forced-air cooling that must remain unobstructed for safe operation.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eRegularly inspect \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e48V DC battery bank connections, busbars, and high-current fuses\/breakers\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e for tightness, corrosion, and heat discoloration.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eUse properly sized \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eindustrial-grade cabling\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e to minimize voltage drop and prevent overheating under heavy load.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eMonitor the display for \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003efault codes, temperature warnings, load percentage, and battery voltage trends\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e to catch issues early.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eAvoid exceeding \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003e8000W continuous \/ 24,000W surge (20 seconds)\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e to protect internal MOSFETs and transformer components.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eEnsure proper \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003esplit-phase balancing (120\/240V loads)\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e to avoid uneven stress across inverter output stages.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eKeep \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eAC input (grid or generator) stable and properly grounded\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, as poor input quality can affect charging performance.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePerform periodic maintenance (every 3–6 months): fan cleaning, terminal re-torque, and load testing under real operating conditions.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eCheck \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003echarger settings and battery profiles (AGM, lithium, lead-acid)\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e are correctly configured for safe multi-stage charging.\u003c\/span\u003e \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aims Power","offers":[{"title":"Default Title","offer_id":45708739051711,"sku":"PICOGLF80W48V240VS","price":3724.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/5703\/0079\/files\/Aims_Power_8000_Watt_48V_Pure_Sine_Inverter_Charger_ETL_Listed.jpg?v=1780983473","url":"https:\/\/backyardprovider.com\/products\/aims-power-8000-watt-pure-sine-inverter-charger-etl-listed","provider":"Your Outdoor Setup Starts Here","version":"1.0","type":"link"}