{"product_id":"scm-linvincibile-f7-20-xylent-cutterblock-jointer","title":"SCM L'invincibile F 7 - Xylent 20\" Jointer","description":"\u003c!-- ============================================================\n     SCM L'Invincibile F 7 X — Shopify Product Description v1\n     Title Tag: SCM L'Invincibile F 7 X | 20.5\" Jointer | Xylent | OakTree Supply\n     Meta Description: SCM L'Invincibile F 7 X 20.5\" jointer with 118-1\/8\" of cast iron table, 11 HP 3-phase, and an SCM-designed Xylent cutterhead. Freight included. Made in Italy.\n     Paste into Products \u003e Description \u003e Source (\u003c\u003e) view\n     ============================================================ --\u003e\n\u003cp\u003eA 20.5\" dedicated jointer with 118‑1\/8\" of cast iron table, 11 HP, 3-phase, and an SCM-designed Xylent cutterhead with 84 carbide inserts. The L'Invincibile F 7 X is SCM's flagship standalone jointer — built for high-production shops that run wide stock continuously and want powered infeed table control, a Smart Lifter guard, and a cast iron fence as standard equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequires 3-phase power (220V). Confirm service availability before ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAt a Glance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e118‑1\/8\" of total table:\u003c\/strong\u003e 70‑7\/8\" infeed, 46‑1\/2\" outfeed, cast iron throughout. More than 9-1\/2 feet of jointing surface — the longer bed provides better support and registration for long stock, reducing the tendency for long boards to tip or rock over the cutterhead.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSCM-designed Xylent cutterhead with 84 carbide inserts:\u003c\/strong\u003e 15×15×2.5mm carbide, four cutting edges per insert. Designed for production volume — quieter than any straight knife cutterhead, better edge retention on resinous and abrasive species, and finer chips for more efficient dust extraction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmart Lifter guard, OSHA compliant:\u003c\/strong\u003e European-style bridge guard that positions itself above the work surface and automatically lifts as the workpiece passes beneath it, then resets. Provides overhead coverage across the full width of the cutterhead. The American spring guard is not fitted on the F 7 X.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowered infeed table with digital depth readout:\u003c\/strong\u003e Infeed table height is controlled from the overhead panel via a powered actuator. Digital readout displays exact depth of cut. Repeatable depth settings without leaving the operating position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCast iron fence, 59\" × 7\":\u003c\/strong\u003e Heavier and more rigid than an aluminum fence, and 12\" longer than the fence on the Nova series. Better registration for long stock during edge jointing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverturning fence, standard:\u003c\/strong\u003e Integrated into the main fence body, the overturning fence gives the operator safe hand clearance when machining small and narrow workpieces fully pressed against the fence. Ships standard on the F 7 X.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcave\/convex infeed table adjustment:\u003c\/strong\u003e The infeed table can be set to a slight concave or convex profile via levers beneath the table — unique to the F 7 series. Enables spring jointing: boards milled with opposing concavity bear tightly at both ends of the joint under clamp pressure, producing a stronger glue line with better distribution than a flat butt joint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallelogram table system, 4 cams per table:\u003c\/strong\u003e Each table pivots on four eccentric cams, one per corner, keeping the table edge at consistent proximity to the cutterhead across the full depth range. Alignment is dialed in at each corner independently with a wrench. No shimming. Because accuracy is set by cam geometry rather than ground to the base, each table is an independent casting — removable, resurfaceable, and reinstallable on its own. Dovetail tables are ground as a matched set to the machine base and cannot be serviced that way.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/16\" (8mm) max depth of cut:\u003c\/strong\u003e Sufficient for aggressive stock removal on rough lumber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0° to 45° fence tilt:\u003c\/strong\u003e Allows the jointer to produce beveled edges on stock.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForklift required for unloading:\u003c\/strong\u003e At 1,875 lbs, this machine cannot be hand-unloaded. A forklift with forks at least 56\" long is required. Confirm equipment availability at your delivery location before ordering.\u003c\/li\u003e\n\u003cli\u003eFreight included; ships from U.S. warehouse\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThe Details\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe L'Invincibile F 7 X is the machine for shops that have identified specific workflow constraints the Nova series does not address — shops processing 8-foot and longer door stiles and rails where every inch of infeed matters, shops where the Smart Lifter guard is a meaningful ergonomic improvement on wide stock, and production operations where powered table control and a digital depth readout translate directly into repeatable results across long runs. It is not a more powerful version of the Nova F 520 — it is a different machine, built around a different set of production priorities.\u003c\/p\u003e\n\u003cp\u003eThe 118‑1\/8\" total table gives the F 7 X nearly a foot of additional reference surface over the Nova F 520. The infeed alone is 70‑7\/8\" — long enough that an 8-foot door stile makes full contact with the table from the moment it reaches the cutterhead. On shorter machines, long stock overhangs the infeed table and creates a pivot point that has to be managed through the pass. On the F 7 X, it does not.\u003c\/p\u003e\n\u003cp\u003eThe Smart Lifter guard is the most visible difference from the Nova series. Where the American spring guard pivots from a fixed point at the side of the cutterhead, the Smart Lifter positions itself above the work surface and automatically lifts as the workpiece passes beneath it, then resets. It provides overhead coverage across the full width of the cutterhead without requiring the operator to manually engage or clear it during the pass. On a 20.5\" machine processing wide stock at production volume, the ergonomic difference between the two guard styles is real and cumulative over a full day of jointing.\u003c\/p\u003e\n\u003cp\u003eThe powered infeed table and digital depth readout are the other meaningful workflow upgrade. On the Nova series, depth of cut is set with a lever at the infeed table. On the F 7 X, it is controlled from the overhead panel via a powered actuator with a digital readout displaying the exact cut depth. In production, this means dialing in a specific depth from the operating position, holding it consistently across a run, and repeating it exactly the next time without re-measuring. The overhead control panel also houses the main power switch, emergency stop, and start\/stop controls — everything the operator needs within reach without moving from the work position.\u003c\/p\u003e\n\u003cp\u003eThe cast iron fence deserves attention. At 59\" × 7\" (1,500 × 175mm), it is both heavier and 12\" longer than the anodized aluminum fence on the Nova series. Cast iron does not flex. On long edge jointing passes where the workpiece bears against the fence for the full length of the cut, rigidity translates directly to accuracy. The additional length also provides better registration at the beginning and end of the pass.\u003c\/p\u003e\n\u003cp\u003eThe overturning fence ships standard. It integrates into the main fence body and gives the operator safe hand clearance when machining small and narrow workpieces fully pressed against the fence.\u003c\/p\u003e\n\u003cp\u003eOne feature exclusive to the F 7 series deserves its own explanation. The infeed table can be adjusted via levers beneath the table to introduce a slight concave or convex profile relative to the cutterhead — set either rising gently toward the cutter or falling away from it. This enables spring jointing. When two boards are milled with opposing concavity and brought together under clamp pressure, the joint closes tight at both ends first, then pulls the center closed. The result is a stronger glue line with more even distribution — less squeeze-out at the center, more consistent pressure end to end — compared to a standard flat butt joint. It is a traditional technique made repeatable by a machine-controlled setting. This adjustment is not available on the Nova series.\u003c\/p\u003e\n\u003cp\u003eThe Xylent cutterhead is SCM's own design. The helical shear geometry of the three spiral insert rows distributes the cut across multiple angled contact points rather than a single full-width knife strike. Compared to any straight knife cutterhead, the result is measurably quieter operation and finer chips rather than large shavings — both meaningful differences over long production sessions. Carbide also holds its edge significantly longer than HSS on resinous species (pine, cedar, teak) and abrasive hardwoods where straight knives dull quickly. For shops running the machine at volume, those factors compound over time.\u003c\/p\u003e\n\u003cp\u003eThe insert maintenance process is worth understanding before you buy. Each of the 84 inserts has four usable cutting edges. When an edge dulls, you rotate the insert 90 degrees to a fresh one. Each insert seat must be cleaned before rotation — skipping this step produces lines in the finished surface. The included dynamometric key provides the correct torque for seating each insert. The Xylent Maintenance Kit (sold separately) contains the cleaning solution, spare inserts, Torx bits, and brushes required to do this correctly. Recommend adding it at purchase.\u003c\/p\u003e\n\u003cp\u003eThe parallelogram table system works differently than the dovetail-style tables found on budget machines. On a dovetail jointer, as you lower the infeed table for a deeper cut, the table slides away from the cutterhead — the gap between the table edge and the cutterhead increases with depth. On the L'Invincibile F 7 X, both tables pivot on parallel arms, moving in an arc that keeps the table edge at consistent proximity to the cutterhead across the full range of depth adjustment. The machine behaves consistently whether you are taking a light skim pass or an aggressive cut. When alignment is needed, you adjust the four eccentric cams per table with a wrench, one per corner, independent of each other. No shimming the ways. Each table is an independent casting — removable and resurfaceable on its own, without affecting the other.\u003c\/p\u003e\n\u003cp\u003eOne installation detail worth planning for before delivery: the fence rides on a bar that extends behind the machine. When the fence is moved to the far end of its travel, that bar projects beyond the rear of the machine's footprint. Plan for adequate clearance behind the machine. Shops running a jointer and planer together typically pair them in a dedicated work cell where the floor layout accounts for the clearance requirements of both machines.\u003c\/p\u003e\n\u003cp\u003eThe F 7 X is stocked in the U.S. in the Xylent configuration only. A Tersa version (F 7 T) can be special-ordered from Italy with a 4–6 month lead time. Customers who cannot wait for a special order and prefer Tersa should consider the SCM Nova F 520 T.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso Consider\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLooking for the same 20.5\" jointing width in a different configuration?\u003c\/strong\u003e The SCM Nova F 520 X is the same jointing width and Xylent cutterhead on an 8 HP platform, with a manual infeed lever, anodized aluminum fence, and OSHA-compliant American spring guard. The SCM Nova F 520 T is the same machine with a Tersa straight knife cutterhead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDon't have a dedicated planer?\u003c\/strong\u003e A jointer flattens one face and one edge. It cannot thickness stock to a consistent dimension. If you don't have a standalone planer, the SCM Nova S 520, the SCM Class S 630, and the SCM L'Invincibile S 7 X are the natural pairings for this machine. Shops already running L'Invincibile equipment typically find the S 7 X the strongest fit.\u003c\/p\u003e\n\u003cp\u003e[TABS]\u003c\/p\u003e\n\u003ch5\u003eFrequently Asked Questions\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this machine require 3-phase power?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The L'Invincibile F 7 X is a 3-phase only machine, 220V, 11 HP. Confirm 3-phase service availability, your panel's available amperage, and circuit capacity before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Smart Lifter guard and how does it differ from the American spring guard?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Smart Lifter is a European-style bridge guard that positions itself above the work surface and automatically lifts as the workpiece passes beneath it, then resets. It provides overhead coverage across the full width of the cutterhead. The American spring guard — standard on the Nova series — pivots from a fixed point at the side of the cutterhead and sweeps back as the workpiece passes. Both are OSHA compliant. The Smart Lifter is generally considered the more ergonomic option on wide machines at production volume, as it requires no manual engagement or resetting during the pass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does the powered infeed table adjustment do?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOn the Nova series, depth of cut is set with a lever at the infeed table. On the F 7 X, infeed table height is controlled from the overhead panel via a powered actuator with a digital readout displaying the exact depth of cut. In production this means setting a specific depth from the operating position without stepping away from the machine, holding it consistently across a run, and repeating it exactly the next time without re-measuring.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs a Tersa version available?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe F 7 X is stocked in the U.S. in the Xylent configuration only. A Tersa version (F 7 T) can be special-ordered from Italy with an approximate 4–6 month lead time. Customers who prefer Tersa and cannot wait for a special order should consider the SCM Nova F 520 T, which ships from the U.S. warehouse.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat dust collection do I need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e980 CFM minimum through a 120mm (4.7\") port. A jointer produces significant shaving volume. A collection system that is marginal for this requirement will fill quickly and create accumulation inside the machine cabinet. Confirm your existing system meets this requirement, or plan for a dedicated collector before the machine arrives.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat clearance does the machine need?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe fence rides on a bar that extends behind the machine. When the fence is moved to the far end of its travel, that bar projects beyond the rear of the machine's footprint. Plan for adequate clearance behind the machine before finalizing the floor layout. Shops pairing this machine with a standalone planer typically position both in a dedicated work cell where the clearance requirements of each machine are accounted for together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if I need both a jointer and a planer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA jointer flattens one face and one edge — it cannot thickness stock to a consistent dimension. If you are setting up a complete milling workflow, the SCM Nova S 520, the SCM Class S 630, and the SCM L'Invincibile S 7 X are the appropriate standalone planers to pair with this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSCM warrants the machine against defects in workmanship and materials for one year from the date of customer acceptance. Belts, bearings, and common electrical components carry a six-month warranty. Wearable items and routine maintenance are not covered.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this eligible for a Section 179 tax deduction?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The L'Invincibile F 7 X qualifies as a capital equipment purchase under Section 179 of the U.S. tax code, which allows businesses to deduct the full purchase price of qualifying equipment in the year it is placed in service — rather than depreciating it over several years. For a machine at this price point, that deduction can meaningfully offset the net cost of purchase. The deduction limit and phase-out thresholds adjust annually, so the exact benefit depends on your total equipment purchases for the year and your tax situation. Consult your tax advisor on how Section 179 applies to your business. See how much you could save with our Section 179 calculator at oaktreesupply.com\/pages\/section-179.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch5\u003eFeatures\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eSCM-Designed Xylent Cutterhead: \u003c\/strong\u003e84 carbide inserts, 15×15×2.5mm, in three spiral rows. Four cutting edges per insert. One screw per insert for secure, repeatable positioning. Helical shear geometry reduces ambient noise below any straight knife cutterhead and produces fine chips for efficient dust extraction.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron Tables, Ribbed: \u003c\/strong\u003eAged cast iron, ribbed for rigidity. 70‑7\/8\" infeed and 46‑1\/2\" outfeed for 118‑1\/8\" of total working surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParallelogram Table Movement, 4 Cams Per Table: \u003c\/strong\u003eEach table pivots on four eccentric cam points, one per corner, maintaining consistent table-edge-to-cutterhead proximity across the full depth range. Alignment is dialed in at each corner independently with a wrench. No shimming. Tables are independent castings, removable and serviceable individually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSmart Lifter Guard, OSHA Compliant: \u003c\/strong\u003eEuropean-style bridge guard. Automatically lifts as the workpiece passes and resets without operator intervention. Provides overhead coverage across the full cutterhead width. Standard on the F 7 X.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverhead Control Panel: \u003c\/strong\u003eHouses main power switch, emergency stop, start\/stop controls, and powered infeed table adjustment. Everything the operator needs within reach from the work position.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePowered Infeed Table with Digital Depth Readout: \u003c\/strong\u003eInfeed table height controlled via powered actuator from the overhead panel. Digital readout displays exact depth of cut for repeatable, documented settings across production runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCast Iron Fence, 59\" × 7\": \u003c\/strong\u003eTilts from 0° (square) to 45° for beveled edge work on stock. Heavier and more rigid than an aluminum fence, and 12\" longer than the Nova series fence. Fence bar extends behind the machine at the far end of its travel — plan for adequate rear clearance before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOverturning Fence: \u003c\/strong\u003eIntegrated into the main fence body. Gives the operator safe hand clearance when machining small and narrow workpieces fully pressed against the fence. Ships standard with the machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConcave\/Convex Infeed Table Adjustment: \u003c\/strong\u003eThe infeed table can be set to a slight concave or convex profile via levers beneath the table. Enables spring jointing — boards milled with opposing concavity produce a stronger glue line with more even distribution than a flat butt joint. Exclusive to the F 7 series.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e120mm Dust Port: \u003c\/strong\u003e4.7\" port. Minimum 980 CFM required. The machine produces significant shaving volume — confirm your collection system meets this requirement before delivery.\u003c\/p\u003e\n\u003ch5\u003eSpecs\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003eMotor:\u003c\/strong\u003e 11 HP, 3-phase, 220V\u003cbr\u003e\u003cstrong\u003eTotal Table Length:\u003c\/strong\u003e 118‑1\/8\" (3,000mm)\u003cbr\u003e\u003cstrong\u003eInfeed Table Length:\u003c\/strong\u003e 70‑7\/8\" (1,800mm)\u003cbr\u003e\u003cstrong\u003eOutfeed Table Length:\u003c\/strong\u003e 46‑1\/2\" (1,180mm)\u003cbr\u003e\u003cstrong\u003eTable Width:\u003c\/strong\u003e 20‑1\/2\" (520mm)\u003cbr\u003e\u003cstrong\u003eMax Depth of Cut:\u003c\/strong\u003e 5\/16\" (8mm)\u003cbr\u003e\u003cstrong\u003eCutterhead Type:\u003c\/strong\u003e Xylent — 84 carbide inserts + 10 spare\u003cbr\u003e\u003cstrong\u003eInsert Dimensions:\u003c\/strong\u003e 15 × 15 × 2.5mm\u003cbr\u003e\u003cstrong\u003eCutterhead Diameter:\u003c\/strong\u003e 4.7\" (120mm)\u003cbr\u003e\u003cstrong\u003eCutterhead Speed:\u003c\/strong\u003e 5,000 RPM\u003cbr\u003e\u003cstrong\u003eFence:\u003c\/strong\u003e Cast iron, 59\" × 7\" (1,500 × 175mm)\u003cbr\u003e\u003cstrong\u003eFence Tilt:\u003c\/strong\u003e 0° to 45°\u003cbr\u003e\u003cstrong\u003eGuard:\u003c\/strong\u003e Smart Lifter — European style, OSHA compliant\u003cbr\u003e\u003cstrong\u003eInfeed Table Control:\u003c\/strong\u003e Powered, with digital depth readout\u003cbr\u003e\u003cstrong\u003eExtra Fence:\u003c\/strong\u003e Overturning fence for small and narrow workpieces, standard\u003cbr\u003e\u003cstrong\u003eInfeed Table Profile:\u003c\/strong\u003e Adjustable concave\/convex via levers beneath table\u003cbr\u003e\u003cstrong\u003eOverhead Control Panel:\u003c\/strong\u003e Standard\u003cbr\u003e\u003cstrong\u003eTable Movement:\u003c\/strong\u003e Parallelogram — 4 eccentric cams per table\u003cbr\u003e\u003cstrong\u003eDust Port Diameter:\u003c\/strong\u003e 120mm (4.7\")\u003cbr\u003e\u003cstrong\u003eDust Extraction Minimum:\u003c\/strong\u003e 980 CFM\u003cbr\u003e\u003cstrong\u003eOverall Dimensions:\u003c\/strong\u003e 118‑1\/8\" × 60‑15\/16\" (3,000mm × 1,548mm)\u003cbr\u003e\u003cstrong\u003eBed Height:\u003c\/strong\u003e 33‑1\/4\" (845mm)\u003cbr\u003e\u003cstrong\u003eHeight to Top of Control Panel:\u003c\/strong\u003e 52‑5\/8\" (1,336mm)\u003cbr\u003e\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 1,875 lbs (850 kg)\u003cbr\u003e\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 2,302 lbs\u003cbr\u003e\u003c\/p\u003e\n\u003ch5\u003eWarranty\u003c\/h5\u003e\n\u003cp\u003eSCM warrants every machine free of defects in workmanship and materials for one (1) year from the date of customer acceptance. Belts, bearings, and common electrical parts carry a six-month warranty. Wearable items and components requiring maintenance in ordinary operation are excluded.\u003c\/p\u003e\n\u003ch5\u003eShipping\u003c\/h5\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: \u003c\/strong\u003eItems being shipped to extremely remote areas or areas with limited delivery access (such as islands only accessible by ferry) may incur additional shipping or freight fees. If your order requires any additional fees other than what is already included in the price, you will be contacted before those fees are applied and before your item ships. This is rare and will not apply to most orders.\u003c\/p\u003e\n\u003ch5\u003e*Machinery Availability Key\u003c\/h5\u003e\n\u003cp\u003eAvailability statuses found above the product description reflect where a machine is in the supply chain at the time of listing. Use the key below to help determine the lead time for this machine.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock for immediate shipment: \u003c\/strong\u003eThe machine is in OakTree Supply's warehouse and is ready to ship.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn stock as of [date] \/ Low stock as of [date]:\u003c\/strong\u003e The machine is in the manufacturer's U.S. warehouse and was available as of the last update we received. Estimated to ship in 3-5 business days. If low stock, please call us before ordering to confirm current availability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEstimated to ship [date]: \u003c\/strong\u003eThe machine is not yet in our warehouse or the manufacturer's warehouse. The date shown is an estimate based on current production and shipping timelines and may change due to manufacturing schedules, import processing, or freight transit.\u003c\/p\u003e\n\u003cp\u003eDates listed as \"estimated\" are not guaranteed and may change. OakTree Supply is not responsible for delays in transit to or from our facility.\u003c\/p\u003e\n\u003cp\u003e[\/TABS]\u003c\/p\u003e","brand":"Your Outdoor Setup Starts Here","offers":[{"title":"Default Title","offer_id":45686992765119,"sku":"F7X","price":22111.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/5703\/0079\/files\/F7-3_26dfe16d-0708-4048-8a2d-1b6b75e0d5d9.jpg?v=1780610142","url":"https:\/\/backyardprovider.com\/products\/scm-linvincibile-f7-20-xylent-cutterblock-jointer","provider":"Your Outdoor Setup Starts Here","version":"1.0","type":"link"}