Heavenly Heat Combination 2 Person Sauna - FLB-60s
Experience the best of both worlds with a 6kw Harvia traditional stone heater and our low EMF/ELF infrared heaters. Use the different heaters together or separately for the most customizable sauna experience on the market.
Features
100% Non-Resinous Canadian Hemlock Wood.
No Glues, Plywood, or Stains.
Customizable Experience:
Use the Infrared heaters, Traditional Stone heater, or both at the same time! (The Infrared heaters will stop producing heat above 165F because using Infrared above that level is too hot)
Premium Warranty:
10 Years for wood/carpentry and 6 years for electrical components including heaters.
Industry Low Infrared EMF/ELF Levels:
We use grounded Low EMF/ELF heaters, faraday shielding. EMF below 2 mg and ELF below 7 v/m for Infrared Heaters.
8mm Tempered Glass:
Thick tempered glass provides phenomenal heat retention and an open, modern design.
Glass-Covered Chromotherapy Lighting:
Choose between 9 different light settings. Glass cover (no plastic).
Customizable Ventilation:
Our sauna vents can be opened or closed while sitting in the sauna. You can keep them closed to increase the heat-up speed and then open them to your liking during your sauna session.
Elevated Bench:
Even though our ventilation system is designed to move the hot air throughout the sauna, hot air still rises. Our elevated bench keeps you in the hottest part of the sauna.
Harvia KV-60-S or FLB-60-S, Stone Heater + Sauna Rocks:
We strictly use the Harvia KV-60-S or FLB-60-S because of performance and ease of use. Harvia is the most trusted name in Sauna Heaters.
Dimensions
- Exterior: 59.1 in. Width / 43.3 in. Depth / 75 in. Height
- Interior: 55.6 in. Width / 39.7 in. Depth / 71 in. Height
- Weight: 485 pounds + traditional heater and rocks
Recommended two inch gap between the sauna and any walls or ceilings
Electrical
Lights:
120V, plug into any standard outlet
Infrared Heaters:
120V
Dedicated 20 Amp
Standard US 20 Amp 3-prong plug
Traditional Heater:
240V
Dedicated 30 Amp
Electrician Required
Harvia KV-60-S or FLB-60-S (controls built on heater)
KV60 & FLB60 needs a 2 pole 30 amp non-GFCI breaker.
Run (2) #10 copper wires + ground to heater.
Wires connect to heater terminals 1 and 2.
Make sure to run the thermostat wire up the face of the sauna wall. Sensor mounts a foot down from the ceiling and about a foot away from the side of the heater.
Assembly Manual
2 Person Combination Sauna Assembly Manual
Traditional Heater Installation Manual
KV60 Heater Installation Manual
What Our Experts Think
-
Dual-Therapy Sauna Experience: The Heavenly Heat Combination 2 Person Sauna (FLB-60s) integrates both far infrared heating and traditional sauna elements, allowing users to choose between deep-penetrating infrared heat or a classic sauna experience for ultimate relaxation and wellness.
-
Spacious & Comfortable for Two: Designed for shared or solo use, this sauna provides ample space for a relaxing session while maintaining a compact footprint that fits well in home wellness areas.
-
High-Quality, Non-Toxic Construction: Crafted with premium, non-toxic wood and safe materials, ensuring durability, structural integrity, and a chemical-free environment for a clean, natural sauna experience.
-
Energy Efficient & Fast Heating: Advanced heating elements provide rapid, even heat distribution while maintaining energy efficiency, making it a cost-effective and eco-friendly choice.
-
Multiple Health Benefits: Ideal for detoxification, improved circulation, muscle relaxation, stress reduction, and enhanced skin health, offering a holistic wellness solution in the comfort of your home.
-
Easy-to-Use Digital Controls: Equipped with intuitive controls for adjusting temperature and session duration, allowing for a customizable sauna experience tailored to your needs.
Q&A
Q: What is the Heavenly Heat Combination 2 Person Sauna (FLB-60s)?
A: The Heavenly Heat FLB-60s is a premium 2-person combination sauna that integrates both far infrared and traditional heating elements. This dual-therapy design allows users to customize their sauna experience for optimal relaxation, detoxification, and overall wellness.
Q: What are the benefits of using the Heavenly Heat Combination 2 Person Sauna?
A: This sauna offers deep muscle relaxation, improved circulation, detoxification, and stress relief. The combination of far infrared and traditional heat provides a customizable experience—whether you prefer deep-penetrating warmth from infrared technology or the intense heat of a traditional sauna.
Q: How does the Heavenly Heat FLB-60s Sauna work?
A: The sauna features far infrared heaters that emit deep-penetrating heat, alongside traditional sauna heating elements that raise air temperature for a classic sauna session. Users can switch between or combine both heating methods to tailor their experience to their preferences.
Q: Is the Heavenly Heat FLB-60s Sauna easy to use and maintain?
A: Yes, this sauna includes intuitive controls for adjusting heat levels and session duration. It is constructed from high-quality, non-toxic materials that are easy to clean, ensuring a safe and low-maintenance experience.
Q: Who can benefit from using the Heavenly Heat Combination 2 Person Sauna?
A: This sauna is perfect for individuals or couples seeking a customizable sauna experience in their home. It’s ideal for those looking to enhance relaxation, relieve muscle tension, improve circulation, and support detoxification with the convenience of both infrared and traditional heating options.
Maintenance Tips
-
Interior Cleaning – Wipe down surfaces with a damp cloth; use mild soap for deep cleaning. Avoid harsh chemicals.
-
Ventilation – Leave the door open after each session to prevent moisture buildup and odors.
-
Heating System Care – Regularly check infrared panels and traditional heater components for dust or obstructions.
-
Protect the Wood – Use towels to absorb sweat and prevent staining. Light sanding can refresh worn areas.
-
Electrical Safety – Inspect wiring and connections periodically to ensure safe operation.
-
Glass & Door Maintenance – Clean glass with a non-abrasive cleaner and check door seals for a tight fit.
-
Proper Usage – Follow manufacturer guidelines for temperature settings and session duration to maximize lifespan.
