Main Access Hercules Power Ionizer Swimming Pool Sanitation System (2 Pack) - 115972

Main Access Hercules Power Ionizer Swimming Pool Sanitation System (2 Pack) - 115972

The Power Ionizer provides swimming pools with a better quality of water, while eliminating the daily usage of harsh chemicals such as chlorine and bromine. The system chamber disperses natural minerals into the water, such as copper and silver, that act as natural algaecides. These natural mineral levels can be easily maintained by adjusting the dial on the side of the unit. The Power Ionizer offers such advanced technology that it is truly a low maintenance system; simply set the dial, relax and enjoy your pool!

The **Power Ionizer System** utilizes natural minerals, such as copper and silver, while eliminating the daily usage of harsh chemicals such as chlorine or bromine. By simply adjusting the dial, the natural mineral level can easily be maintained between 0.3-0.6 ppm. Traditional salt systems can cause corrosion to the steel wall on top rails. More and more, pool manufacturers will not warranty a pool that uses a traditional salt system. The Power Ionizer System utilizes a minimal amount of salt in a unique way; simply to kick-start the process and then allows natural minerals to take over. This process is environmentally friendly and safe for your pool. There are also a few simple chemicals that help keep your pool sparkling clear!

• **New Main Access Power Ionizer Sanitation System**
• PH Neutral
• Greatly reduces time spent balancing chemicals!
• Non-traditional, hybrid salt system
• Non-corrosive!
• One-time application of salt
• no residual; will not void pool warranty
• Hypoallergenic
• Reduces itchy skin, irritated eyes, faded swimsuits, and chemical odors
• Pet friendly!
• Proven technology! Years of success in all regions
• Environmentally friendly! Less chemicals!
• Easy to install; Easy to use!
• **Start Up For The Power Ionizer System**
• Install on the return side of the filter in any direction. Without a flow switch, the system utilizes unique water flow vibration technology.
• Turn system control knob to 3 to start, making sure that the green "Active" light is on when the pump is running.
• During initial fill, add salt (typically 40-80lbs.) to achieve a 1,000 ppm reading of Total Dissolved Solids.
• Add entire bucket of Condition by broadcasting into pool.
• Use the test strips provided to balance pH, alkalinity, and copper.
• **Water Testing For The Power Ionizer**
• Alkalinity between 80-150 ppm.
• pH between 7.2-7.6 ppm.
• Calcium Hardness between 180-250 ppm.
• Test mineral level (copper) between .3-.6 ppm. TDS must be over 1,000 ppm *may take up to 3 days for initial level to get within ideal range
• Iron and other metals should be zero.
• **Maintenance For The Power Ionizer**
• Weekly water test to balance all levels, including natural minerals (copper).
• Use the control knob to adjust copper to within ideal range of 0.3-0.6 ppm.
• Note: If the control knob is turned to maximum it may shut down the unit, leaving the red "chamber" light on. Simply turn the control knob down until the red light goes off and the green light remains on.
• The green "Active" light will be lit when the pump is on. This will give the most accurate temperature reading as well as indicate the Power Ionizer is functioning properly.
• Shock every other week with one bag of Refresh per 10,000 gallons of water.
• Pour one pint of Cleanse (natural enzyme clarifier) per 10,000 gallons of water, directly into pool every other week.
• To winterize, remove the Power Ionizer unit and store it in a cool, dry place.
• The chamber needs to be replaced approximately once a season.
• Replacement time indicated by the red "chamber" light.
• **Installs in Minutes!**
• Works on In-Ground and Above-Ground pools (3,500
• 40,000 gallons).
• Compatible with all filtration systems.
• Eliminates chlorine usage on a daily basis
• Quantity: 2

• Regular Cleaning: Clean the ionizer electrodes regularly to prevent buildup of minerals and ensure optimal performance. Use a soft cloth or sponge and avoid abrasive materials that may damage the surface.
• Inspect for Wear: Check the ionizer for any signs of wear, damage, or corrosion, especially around the electrode areas. Replace any worn-out parts as needed to maintain efficiency.
• Check Water Chemistry: Regularly monitor your pool’s water chemistry, especially pH and chlorine levels, as the ionizer works best when the water balance is maintained. Adjust the chemicals as necessary.
• Replace Electrodes: Over time, the electrodes in the ionizer may wear down. Follow the manufacturer’s guidelines for replacing them when they no longer perform effectively.
• Ensure Proper Installation: Verify that the ionizer is correctly installed according to the manufacturer’s instructions, ensuring it is securely connected and positioned for optimal water flow.
• Winter Care: Before storing the ionizer for the winter, clean it thoroughly and store it in a dry, cool place to prevent damage from freezing temperatures or moisture.
• Battery Maintenance: If the unit is battery-powered, ensure that batteries are replaced or recharged according to the manufacturer’s instructions to keep the ionizer working efficiently.

Q: What is included in the Main Access Hercules Power Ionizer System 2 Pack?
A: The 2-pack includes two Hercules Power Ionizer units designed for swimming pool sanitation, using ionization technology to help reduce the need for harsh chemicals and maintain clean pool water.

Q: How does the Hercules Power Ionizer work?
A: The ionizer uses copper and silver ions to disinfect the pool water, effectively reducing bacteria, algae, and other contaminants while minimizing the use of chlorine and other chemicals.

Q: Is the system easy to install?
A: Yes, the Hercules Power Ionizer is designed for easy installation, typically attaching to your pool's filtration system for seamless integration and immediate benefits.

Q: What are the benefits of using the Hercules Power Ionizer?
A: The ionizer provides a more natural and eco-friendly way to maintain clean pool water, reducing chemical use, minimizing chlorine odors, and improving overall water clarity.

Q: Who is this product ideal for?
A: The Hercules Power Ionizer is perfect for pool owners looking to reduce their reliance on chemicals, improve water quality, and maintain a healthier pool environment with minimal effort.

• Regular Cleaning: Clean the ionizer regularly to prevent mineral buildup. Use a soft cloth or brush to gently remove debris and ensure the ionization chamber is free of blockages.
• Ionizer Settings: Check and adjust the ionizer's settings according to manufacturer recommendations to maintain proper sanitation levels.
• Inspect the Electrodes: Periodically check the electrodes for signs of corrosion or wear. If the electrodes appear worn or are not producing ions effectively, replace them as needed.
• Water Testing: Regularly test your pool water to ensure the ionization system is functioning properly and the chemical balance is correct. Maintain proper pH and alkalinity levels to optimize the system’s performance.
• Power Supply: Ensure the ionizer’s power supply is functioning properly. Check connections and cords for damage or wear. Replace any faulty components to avoid performance issues.
• Winterization: Before the off-season, disconnect the ionizer and store it in a dry, cool location to protect it from freezing temperatures or moisture damage.
• General Maintenance: Follow any specific manufacturer instructions for maintenance or upgrades to keep the system running efficiently.