CLEARANCE SALE.
ITEMS LEFT.
PEOPLE are also watching that product.
888-575-2099
(888)-575-2099
CLEARANCE SALE.
ITEMS LEFT.
PEOPLE are also watching that product.
The Marrs-Bar is a specialty training Olympic safety squat barbell outfitted with a built-in padded harness to reduce unnecessary strain on your upper body, shoulders, and joints. By distributing weight like a backpack, you will activate your glutes and hamstrings and increase your strength and power. With an ultra-comfortable polyurethane foam harness, you can squat more weight without discomfort in the neck and shoulders, common with traditional squat and power bars. The extended, wrapped handles and low bar, cambered design, along with the front handles, are positioned to reduce even more stress on your joints and increases the effectiveness of your barbell squats. The Marrs-Bar teaches various exercises, is an excellent rehab accessory, promotes proper form, and reduces the risk of injury.
The Marrs-Bar is the original, patented, top-of-the-line Safety Squat Olympic Bar with a thicker harness that will reduce the risk of wrist, elbow, shoulder, and neck injuries.
The Marrs-Bar is the original, patented, top-of-the-line Safety Squat Olympic Bar with a thicker harness that will reduce the risk of wrist, elbow, shoulder, and neck injuries.Shoulder and arm pads for a comfortable lift
Extra thick pad comes in one piece to prevent sliding on the bar while squatting
Mold-foam harness does not require a vinyl cover and molds to your shoulders
Shoulder pad reduces the risk of wrist, elbow, shoulder, and neck injuries
Meant for Traditional, Front Squat, Lunge, Good Mornings, Rehab and Physical Therapy
Takes the pressure off your knees
6" drop keeps the weight plates lower for a stabilized center of gravity and better balance
5" long hand grips for control when needed
Free shipping straight to your door
Made in the USA
Patent Pending
Shaft Diameter | 38 mm |
---|---|
Sleeve Diameter | 49 mm |
Overall Length | 89 in. |
Loadable Sleeve Length | 16.25 in. |
Sleeve to Sleeve Length | 52.5 in. |
Handle Spacing | 11 in. |
Shoulder Pad Height | 20 in. |
Shoulder Pad Inside Width | 7 in. |
Shoulder Pad Grip Length | 6 in. |
Shoulder Pad Grip Diameter | 43 mm |
Camber Drop | 45 Degrees |
Sleeve Coating | Black Zinc |
Shaft Coating | Silver Zinc |
Tensile Strength | 190,000 PSI |
Weight Capacity | 1,200 lb. |
Product Weight | 64 lb. |
The Marrs-Bar is a specialty training Olympic safety squat barbell outfitted with a built-in padded harness to reduce unnecessary strain on your upper body, shoulders, and joints. By distributing weight like a backpack, you will activate your glutes and hamstrings and increase your strength and power. With an ultra-comfortable polyurethane foam harness, you can squat more weight without discomfort in the neck and shoulders, common with traditional squat and power bars. The extended, wrapped handles and low bar, cambered design, along with the front handles, are positioned to reduce even more stress on your joints and increases the effectiveness of your barbell squats. The Marrs-Bar teaches various exercises, is an excellent rehab accessory, promotes proper form, and reduces the risk of injury.
The Marrs-Bar is the original, patented, top-of-the-line Safety Squat Olympic Bar with a thicker harness that will reduce the risk of wrist, elbow, shoulder, and neck injuries.
The Marrs-Bar is the original, patented, top-of-the-line Safety Squat Olympic Bar with a thicker harness that will reduce the risk of wrist, elbow, shoulder, and neck injuries.Shoulder and arm pads for a comfortable lift
Extra thick pad comes in one piece to prevent sliding on the bar while squatting
Mold-foam harness does not require a vinyl cover and molds to your shoulders
Shoulder pad reduces the risk of wrist, elbow, shoulder, and neck injuries
Meant for Traditional, Front Squat, Lunge, Good Mornings, Rehab and Physical Therapy
Takes the pressure off your knees
6" drop keeps the weight plates lower for a stabilized center of gravity and better balance
5" long hand grips for control when needed
Free shipping straight to your door
Made in the USA
Patent Pending
Shaft Diameter | 38 mm |
---|---|
Sleeve Diameter | 49 mm |
Overall Length | 89 in. |
Loadable Sleeve Length | 16.25 in. |
Sleeve to Sleeve Length | 52.5 in. |
Handle Spacing | 11 in. |
Shoulder Pad Height | 20 in. |
Shoulder Pad Inside Width | 7 in. |
Shoulder Pad Grip Length | 6 in. |
Shoulder Pad Grip Diameter | 43 mm |
Camber Drop | 45 Degrees |
Sleeve Coating | Black Zinc |
Shaft Coating | Silver Zinc |
Tensile Strength | 190,000 PSI |
Weight Capacity | 1,200 lb. |
Product Weight | 64 lb. |