Best Wire Management - PV cables and wiring for module-level electronics fits inside rails to avoid time consuming wire management.
Use Any Roof Attachments - Included L-feet mount to Tamarack composition shingle flashings, S-5! metal roof clamps or any roof attachment that can be used with a 5/16 inch bolt.
One Wrench Size - Install with ease and minimal tools. A 1/2-inch socket fits all fasteners.
UL 2703 Listed - All components meet UL standards and have Class A Fire Rating for Type 1 and 2 modules.
Tamarack Flush Mount 93-inch Rail Kit Install Eight PV Modules
Black Coated Rails
Attractive low-profile mounting of up to eight modules with four-foot roof attachment spacing. Certified for up to 180 MPH wind speed and 120 PSF snow load. Eight 93-inch rails included.
5050 Clamp
One clamp can be used as a mid-clamp or an end-clamp on modules with 30 mm to 40 mm frame height. 20 clamps included.
Channel End Clamp
This end clamp replaces the 50/50 clamp at the end of the row of modules for better aesthetics. It is your choice which part to use. 8 clamps included. MLPE Adapter Use this adapter for mounting microinverters and optimizers on the rails under the modules. Use one adapter for each device. 8 adapters included.
Push-On End Cap
Caps give the rail system a finished look while allowing drainage. 8 caps included. Wire Management Clip Clips can be pushed into top of rail to keep cables in place. 24 clips included. Tamarack Flush Mount 93-inch Rail Kit Install Eight PV Modules
Ground Lug
Use one per module row to ground rail with bare 6 to 10 AWG copper wire. 4 Ground Lugs included.
Push-In Bonding Rail Splice
Quickly splice and bond rail sections with no tools or fasteners. Top Clamps and Rail Mounts can be co- located with splice. 8 splices are included.
Rail Mount and L-Foot
Quickly and securely mount the rail from either side, to Tamarack composition shingle flashings, S-5! metal roof clamps or any roof attachment that can be used with a 5/16 inch bolt. 16 mounts and L-feet included.
Push-On End Cap
Caps give the rail system a finished look while allowing drainage. 8 caps included.
Wire Management Clip
Clips can be pushed into top of rail to keep cables in place. 24 clips included.
Tamarack Solar Rail Kit and L-Foot
Quickly and securely mount the rail from either side, to Tamarack composition shingle flashings, S-5! metal roof clamps or any roof attachment that can be used with a 5/16 inch bolt. 16 mounts and L-feet included.
MLPE Adapter
Use this adapter for mounting microinverters and optimizers on the rails under the modules. Use one adapter for each device. 8 adapters included.
Still Have Questions? Give us a call today 1-877-242-2792
