icon FLUX Beam Air Filter Fume Extractor | Backyard Provider Skip to content
Warranty

Manufacturer's warranty on most items

Great Discounts

Your favorite products on sale

 
Expert Assistance

Need help? Give us a call at 888 575-2099

Free Shipping

We offer free shipping

FLUX Beam Air Filter Fume Extractor

FLUX Beam Air Filter Fume Extractor

by FLUX
SKU
Save 6% Save 6%
$1,895.00
$1,895.00 - $1,895.00
$1,895.00
$1,781.99
$1,781.99 - $1,781.99
$1,781.99

  • CLEARANCE SALE.

  • ITEMS LEFT.

  • PEOPLE are also watching that product.


FLUX Beam Air Filter Fume Extractor

The Beam Air is a universal fume extractor for laser cutters. Whether planning to buy a laser cutter for home, hobby, or business use, the Beam Air can provide the ability to minimize or eliminate a majority of particles and scents of materials in use for almost any laser cutter.

If already using a laser cutter, the strong scents and particles that could be emitted from the laser cut material may be all too familiar. The Beam Air can efficiently solve these problems by using four layers of technologically advanced filters

  • Pre-Filter: This is the first layer of defense! The pre-filter is positioned on the top of the Beam Air, so it is the first filter that will be preventing particles from passing through – coming from the laser cutter which is connected via a tube. Because this filter is the thinnest and the top layer, this filter will need to be replaced after every 10 – 30 hours of use.

  • Medium Efficiency Filter: Just below the pre-filter, the medium efficiency filter provides a buffer and further filtering out particles which managed to get through the pre-filter. To ensure the Beam Air is eliminating as many particles from passing to the outside environment, this filter will need to be replaced after every 50 – 150 hours of use.

  • H13 HEPA Filter: The third section of the Beam Air is known as the H13 HEPA Filter and as it is near the center of the Beam Air, it filters out the few remaining particles that may have penetrated past the other two filters. This filter will need to be replaced after every 100 – 200 hours of use.

  • Activated Charcoal Filter: This is the bottom filter, or final filter, of the Beam Air. Particles have to make it past three other filters to reach this one. This filter can eliminate almost all of the particles at this point, allowing for the Beam Air to be a proficient fume extractor. This long-lasting filter will need to be replaced after every 300 – 600 hours of use.

System Flow 353 CFM - 195 CFM
Dimensions 18.50 x 10.24 x 19.29 inch
Weight 37.48 lb
Power AC 110 V / 220 V
Max. fan volume 2588.89 gal/min
Voltage 180 W
Inlet diameter 3.94 inch
Filter Pre-Filter, Medium efficiency filter, activated charcoal filter, H13 HEPA filter

Order shipment preparation takes 3 days. Once shipped orders usually take 2 weeks to be delivered. These are estimations; delivery can be delayed for reasons beyond our control. You can always contact us to know the exact delivery time once you placed an order with us. Have a look at our shipping policy here.

 
 

FLUX Beam Air Filter Fume Extractor

The Beam Air is a universal fume extractor for laser cutters. Whether planning to buy a laser cutter for home, hobby, or business use, the Beam Air can provide the ability to minimize or eliminate a majority of particles and scents of materials in use for almost any laser cutter.

If already using a laser cutter, the strong scents and particles that could be emitted from the laser cut material may be all too familiar. The Beam Air can efficiently solve these problems by using four layers of technologically advanced filters

  • Pre-Filter: This is the first layer of defense! The pre-filter is positioned on the top of the Beam Air, so it is the first filter that will be preventing particles from passing through – coming from the laser cutter which is connected via a tube. Because this filter is the thinnest and the top layer, this filter will need to be replaced after every 10 – 30 hours of use.

  • Medium Efficiency Filter: Just below the pre-filter, the medium efficiency filter provides a buffer and further filtering out particles which managed to get through the pre-filter. To ensure the Beam Air is eliminating as many particles from passing to the outside environment, this filter will need to be replaced after every 50 – 150 hours of use.

  • H13 HEPA Filter: The third section of the Beam Air is known as the H13 HEPA Filter and as it is near the center of the Beam Air, it filters out the few remaining particles that may have penetrated past the other two filters. This filter will need to be replaced after every 100 – 200 hours of use.

  • Activated Charcoal Filter: This is the bottom filter, or final filter, of the Beam Air. Particles have to make it past three other filters to reach this one. This filter can eliminate almost all of the particles at this point, allowing for the Beam Air to be a proficient fume extractor. This long-lasting filter will need to be replaced after every 300 – 600 hours of use.

System Flow 353 CFM - 195 CFM
Dimensions 18.50 x 10.24 x 19.29 inch
Weight 37.48 lb
Power AC 110 V / 220 V
Max. fan volume 2588.89 gal/min
Voltage 180 W
Inlet diameter 3.94 inch
Filter Pre-Filter, Medium efficiency filter, activated charcoal filter, H13 HEPA filter

Order shipment preparation takes 3 days. Once shipped orders usually take 2 weeks to be delivered. These are estimations; delivery can be delayed for reasons beyond our control. You can always contact us to know the exact delivery time once you placed an order with us. Have a look at our shipping policy here.