Heliatos Standard Solar Water Heater Kit

Heliatos Standard Solar Water Heater Kit

Our Standard Solar Water Heating Kit comes with all the parts needed to install your solar water heater system on your house or cabin. As with all our systems, they connect directly to your existing water heater and don't interfere with existing source of heat (gas or electric). This way you can enjoy hot water even during long cloudy periods. Using our SW-38 Solar Water Heater panels you can simply thread the panels together. No more external connection pipes for multi panel installations! Each panel weighs 12 lbs. and is 24' by 24' but can still provide you with ample hot water. You can begin your system with a few panels and add more if you need more. With this kit you DO NOT have to solder at all! 

Materials

• Glazing: UV resistant twin wall polycarbonate
• Frame: Architectural grade aluminum alloy 6063
• Insulation: Polyiso foam (meets requirements for ASTM-C1289, Type 1
• specification)
• Water Conduit: Copper Tubing (Alloy C12200 certified for public water supplies
• meeting EPA Lead and Copper Rule 56 FR26460, June 7th, 1991)
• Fittings: Brass, Lead Free compliant with Federal Reduction of Lead in
• Drinking Water Act , Dezincification resistant
• Seals: Butyl Rubber

Physical

• Length: 24.0 Inches
• Width: 25.25 Inches
• Height: 2.125 Inches
• Active Collector Area: 3.674 ft2
• Mounting Hole Spacing: 24.75 x 17.00 Inches x Inches
• Volume of Liquid in Collector: 7.7 fl. oz.
• Total Panel Weight: 11.6 lb.
• Input and Output Connections: 3/8 “ Compression Fitting

Maximum Ratings

• Pressure: 150 Psi
• Collector Temperature: 203 ºF
• Mounting Surface Unevenness: ¼ Inch (corner to corner)

• Your selected quantity of SW-38 Solar Water Heating Panels
• ALL the fittings and adapters you need
• 1 Bottom Feed Connector
• 1 TopsFlo TD5 stainless steel pump
• 1 10W PV Panel including wire and PV mounting kit
• Instructions for Installation - Single Row
• Instructions for Installation - Double Row

• Instructions Installation For Single Row

• Instructions Installation For Double Row