Kegco Wide Single Tap Stainless Steel Commercial/Residential Kegerator - Z163S-1NK

Kegco Wide Single Tap Stainless Steel Commercial/Residential Kegerator - Z163S-1NK

• Includes a brand new 5 lb. Aluminum CO2 Tank

  This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved, and have a male thread for CO2 regulators. An average fill is good for 5-6 kegs depending upon your fill.

• Includes Commercial Grade Dual Gauge CO2 Regulator

  The regulator works with any CO2 tank with a CGA-320 valve and measures PSI, as well as the volume of the CO2 gas in the cylinder. It has a pressure release valve and a large hand control which makes it easy to adjust the pressure inside the keg.

• Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap Clamps

  This standard length 5 foot 5/16" I.D. blue air/CO2 tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. The air line assembly comes with two plastic snap clamps with a reusable clamp design.

• Includes D system lever handle keg coupler that can tap all domestic kegs

  This commercial grade lever handle keg coupler works with all American "D" system Sankey kegs. It features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg, simply pull out and then down on the lever handle.

• Includes a 3" Diameter Polished Stainless Steel Draft Tower

  This NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel and includes 5 feet of 3/16" I.D. clear beer tubing. The faucet, shank, and fittings are all made of 304 grade stainless steel for the ultimate in sanitation. This tower is mounted using the gasket and four screws that are included.

• All dispensing accessories are UL recognized components

• Converts to a refrigerator with 3 full-width wire shelves

• Large enough to hold all full size kegs (including Coors, Miller, and many additional brands)

• Holds 1/2 barrels, full size kegs (15.5 gallons), 1/4 barrels, ponies (7.75 gallons), and 1/6 barrels (5 gallons)

• Matte black cabinet with stainless steel door

• Stainless door has a protective film on it to prevent scratches during shipment; film can be peeled off once the kegerator has been set up

• Digital temperature control allows you to adjust the temperature between 32 and 75 degrees Fahrenheit

• Maximum Ambient Temperature: 90 degrees Fahrenheit

• Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.

• A great choice for dispensing beer, soda, kombucha, and wine

• Easy roll casters provide convenient mobility

• Removable built-in drip tray with grill collects drips and spills

• Chrome guard rail helps prevent mugs and glasses from sliding off

• Steel interior floor mat ensures long-lasting durability and allows kegs to glide easily in and out of the cabinet

• 25% more energy efficient design saves you money each month!

• Plugs into standard home outlets

• CSA certified to conform to NSF/ANSI 7

• This kegerator can fit one full size, pony, or quarter slim keg, two 5 gallon commercial kegs, three ball lock kegs, or two pin lock kegs. PLEASE NOTE: Will not accommodate an "A" system keg.