Direct drive technology with one moving part for maximum force and longevity
Soft start and stop on a variable curve ramp
Dynamic force and speed settings automatically adjust over time for changing door and environmental conditions to optimize safety and operation
Active motor braking during travel helps minimize loss of control during door malfunction
The operator actively pushes in the closed direction during an attempted break-in
The emergency release can be disengaged and re-engaged in any position
Built-in LED lighting at the motor carriage
Easily cut down rail and chain for tight spaces and/or use Connector Wire and GDO Connection Coupler to gain additional travel (see Header to Obstruction Chart)
Add Short, Medium, or Long Rail Extensions for taller doors up to 24' (see Door Height by Rail Extension Chart)
Monitored safety edge and optical safety edge terminals on the motor carrier to avoid coil cords or taking up reels
Interlock capable for pass doors, mechanical locks, etc.
Pre-programmed 4-button Pearl transmitter in the box
Repeating and forwarding radio functions for maximum range
Use Pearl Vibe or Slider Vibe transmitters for live feedback from the operator
Multiple functions are available through radio commands: pulse operation, light function, partial opening, defined open and defined close
Transmitter management on-site or remotely through Codemaster+
Accu internal battery backup or Accu 2.2 external battery backup provides power for standby operation during power outages
Compatible with SOMweb for remote access and monitoring by push notifications and/or with the live in-app indoor or outdoor camera feed
Use Telecody Courier for parcel delivery to your garage with any delivery service--opening distance is adjustable by the homeowner
Automatic closing in either semi-automatic or fully automatic modes (Buzzer required for activation)
Use Relay for switching external garage lighting up to 240V/5A
Maintenance-free for most environments
The motor carriage can be easily removed for service or repair without needing to disassemble rail
~100 settings adjustments, ~60 diagnostic features, and ~180 standard operating codes available through the SOMlink service interface
Technical Specifications
Assembled size: 140.8"L x 4.37"W x 5.55"H
922.5 MHz radio frequency with 128-bit AES encryption
SOMloq2 system
Rolling code
4-channel on-board receiver
40-slot receiver memory (expandable to 450 slots with Memo)
Homelink module included for 310 MHz direct programming
Tested to 125,000 cycle threshold in beta phase
Rated for doors up to 600 lbs. counter-balanced weight (seeDoor Weight Chartfor reference)
Up to 9.4" per second operating speed at 7,800 RPM
Duty rating: 40% (seeDuty Rating Chartfor more information)
Max travel with extensions: 24' (seeDoor Height by Extensionschart for additional information)
UL listed and compliant with current UL325 requirements for residential and commercial doors
6' power cord
120V AC 60 Hz power input
24V AC, 100 VA transformer with Class 2 UL protection rating
24V DC motor
1A max power draw with >3 W standby power
>59 dBA noise level (operator only)
NEMA 1 / IP 21 rated
FCC ID: T8C206
IC ID: 6496A-206
Items Included in the Box
2060 motor carriage
Control Housing
Pearl 4-button transmitter with visor clip
3x operator rail
2x connecting sleeve
Chain with isolator
Straight door arm
Curved door arm
Installation bag
Door hardware bag
Ceiling bracket kit
Safety sensor kit
Wired 3-button wall station kit
Wiring kit
Docs bag
English technical manual
Spanish technical manual
Additional Documents:
evo+ Brochure evo+ Technical Manual evo+ Quick Install Guide evo+ Shop Drawings and Technical Data Sheet evo+ Warranty Maximum Door Weights Chart Duty Rating Chart Door Height by Rail Extension Chart Header to Obstruction Chart Multi-Tenant Garage Specification and Transmitter Compatibility Homelink Instructions evo+_pro+
Direct drive technology with one moving part for maximum force and longevity
Soft start and stop on a variable curve ramp
Dynamic force and speed settings automatically adjust over time for changing door and environmental conditions to optimize safety and operation
Active motor braking during travel helps minimize loss of control during door malfunction
The operator actively pushes in the closed direction during an attempted break-in
The emergency release can be disengaged and re-engaged in any position
Built-in LED lighting at the motor carriage
Easily cut down rail and chain for tight spaces and/or use Connector Wire and GDO Connection Coupler to gain additional travel (see Header to Obstruction Chart)
Add Short, Medium, or Long Rail Extensions for taller doors up to 24' (see Door Height by Rail Extension Chart)
Monitored safety edge and optical safety edge terminals on the motor carrier to avoid coil cords or taking up reels
Interlock capable for pass doors, mechanical locks, etc.
Pre-programmed 4-button Pearl transmitter in the box
Repeating and forwarding radio functions for maximum range
Use Pearl Vibe or Slider Vibe transmitters for live feedback from the operator
Multiple functions are available through radio commands: pulse operation, light function, partial opening, defined open and defined close
Transmitter management on-site or remotely through Codemaster+
Accu internal battery backup or Accu 2.2 external battery backup provides power for standby operation during power outages
Compatible with SOMweb for remote access and monitoring by push notifications and/or with the live in-app indoor or outdoor camera feed
Use Telecody Courier for parcel delivery to your garage with any delivery service--opening distance is adjustable by the homeowner
Automatic closing in either semi-automatic or fully automatic modes (Buzzer required for activation)
Use Relay for switching external garage lighting up to 240V/5A
Maintenance-free for most environments
The motor carriage can be easily removed for service or repair without needing to disassemble rail
~100 settings adjustments, ~60 diagnostic features, and ~180 standard operating codes available through the SOMlink service interface
Technical Specifications
Assembled size: 140.8"L x 4.37"W x 5.55"H
922.5 MHz radio frequency with 128-bit AES encryption
SOMloq2 system
Rolling code
4-channel on-board receiver
40-slot receiver memory (expandable to 450 slots with Memo)
Homelink module included for 310 MHz direct programming
Tested to 125,000 cycle threshold in beta phase
Rated for doors up to 600 lbs. counter-balanced weight (seeDoor Weight Chartfor reference)
Up to 9.4" per second operating speed at 7,800 RPM
Duty rating: 40% (seeDuty Rating Chartfor more information)
Max travel with extensions: 24' (seeDoor Height by Extensionschart for additional information)
UL listed and compliant with current UL325 requirements for residential and commercial doors
6' power cord
120V AC 60 Hz power input
24V AC, 100 VA transformer with Class 2 UL protection rating
24V DC motor
1A max power draw with >3 W standby power
>59 dBA noise level (operator only)
NEMA 1 / IP 21 rated
FCC ID: T8C206
IC ID: 6496A-206
Items Included in the Box
2060 motor carriage
Control Housing
Pearl 4-button transmitter with visor clip
3x operator rail
2x connecting sleeve
Chain with isolator
Straight door arm
Curved door arm
Installation bag
Door hardware bag
Ceiling bracket kit
Safety sensor kit
Wired 3-button wall station kit
Wiring kit
Docs bag
English technical manual
Spanish technical manual
Additional Documents:
evo+ Brochure evo+ Technical Manual evo+ Quick Install Guide evo+ Shop Drawings and Technical Data Sheet evo+ Warranty Maximum Door Weights Chart Duty Rating Chart Door Height by Rail Extension Chart Header to Obstruction Chart Multi-Tenant Garage Specification and Transmitter Compatibility Homelink Instructions evo+_pro+