icon SCM Minimax Automatic Edgebander With Pre-Milling & Corner Radius 3-Ph | Backyard Provider Skip to content
Warranty

Manufacturer's warranty on most items

Great Discounts

Your favorite products on sale

 
Expert Assistance

Need help? Give us a call at 888 575-2099

Free Shipping

We offer free shipping

SCM Minimax Automatic Edgebander With Pre-Milling & Corner Radius 3-Phase - ME 35ET-3ph

SCM Minimax Automatic Edgebander With Pre-Milling & Corner Radius 3-Phase - ME 35ET-3ph

by SCM
SKU ME 35ET-3ph
Save 6% Save 6%
$26,395.00
$26,395.00 - $26,395.00
$26,395.00
$24,811.99
$24,811.99 - $24,811.99
$24,811.99

  • CLEARANCE SALE.

  • ITEMS LEFT.

  • PEOPLE are also watching that product.


SCM Minimax  Automatic Edgebander With Pre-Milling & Corner Radius 3-Phase - ME 35ET-3ph

The Minimax ME 35ET is a single-phase automatic edgebander with great flexibility for both thin and thick edges. It is intended to bridge the gap between a traditional small to midsize edgebander to the more robust equipment used in the Classical line of products. There is no competition in the U.S. market for such a small, versatile machine, with pre-mill that is so economical! 

The ME 35ET pre-mill unit is complete with two diamond tools, 80mm diameter. This allows for a clean edge and a good lineal finish during the pre-mill process. The pre-milling unit comes with an independent exhaust and air blower for cleaning of the panel during the process. You can carry out vertical adjustments of the tools for use even into the final sharpening phase.

An interchangeable glue pot allows for easier access. The glue pot is Teflon coated to allow for easy clean up and easy glue replacement with a quick heat-up system. The system applies the glue to the panel with a vertical glue spreading roller, and the temperature is adjustable via the EYE-S control panel. This machine also has a device to automatically recover any unused glue.

The high frequency motors generate high cutter rotating speed, reducing to a minimum any marks left from trimming and guaranteeing the absence of vibrations. These cutters are designed for straight or radius trimming of any type of edge.

The special end-cutting unit with radius function is installed in place of the standard end-cutting unit. During the process of cutting off the front and rear exceeding edges (except for solid wood strips), it rounds off the angles of the edge banded panel. This creates a beautiful radius edge. This function is directly controlled with the operator interface at the control panel. 

The Minimax 35ET comes with the Eye-S, a touch screen control panel loaded with features to make edge banding applications easy. It allows you to choose the type of material you’re working with (MDF, chipboard, etc.), set the height and thickness of material, and adjust the glue temperature and type, among other things. All edge banding functions are shown graphically on the screen, so it leaves little room for errors or confusion.

      • Pre-milling unit creates perfect joint lines

      • Interchangeable glue pot for PU accuracy

      • Intuitive EYE-S Touchscreen Control Panel allows user to select material size, control glue temperature, and many other edge banding functions

      • Rounding unit rounds thin and thick edges up to 3 mm

      • End cutting unit with radius function cuts off the front and rear exceeding edges and also performs the end rounding

      • Always accurate and high-speed cuts thanks to blade and high frequency motor

      • High productivity by the track feed speed

      • 9 meter/min panel feed speed with track movement for increased productivity with dual presser wheels and panel roller support on the entire length of the machine

      • Top thick steel pressure beam with rubber-coated wheels

      • Precise horizontal and vertical copying wheels have chrome plated surfaces, and assure accurate positioning of knives in relation to the cutting point

      • Excellent vibration-free finish thanks to the high-rigidity structure of the edge scraping unit

      Motor: 3-phase, 220V
      Pneumatic operating pressure: 6.5 bar
      Exhaust outlets – Pre-Milling Unit (x2): 3” (76 mm)
      Exhaust outlet - Glue Pot: 2.36” (60 mm)
      Exhaust outlets – Edgebander Unit Stations (x2): 2.36” (60 mm)
      Worktable dimensions: 118” x 20.6” (3,000 mm x 525 mm)
      Worktable height: 35.5” (904mm)
      Thickness of rolled edges: 0.4 - 3 mm
      Thickness of edges in strips: up to 5 mm
      Min. - max. panel height: 8 mm - 50mm (.315” – 1.96”)
      Min. panel length/width with rolled edges: 7.48”/4.33” (190/110 mm)
      Min. panel length cut only on the front: 4.72” (120 mm)
      Feed speed: 7 m/min (23 fpm)
      Feed motor power: 73Hp

       

       
       

      SCM Minimax  Automatic Edgebander With Pre-Milling & Corner Radius 3-Phase - ME 35ET-3ph

      The Minimax ME 35ET is a single-phase automatic edgebander with great flexibility for both thin and thick edges. It is intended to bridge the gap between a traditional small to midsize edgebander to the more robust equipment used in the Classical line of products. There is no competition in the U.S. market for such a small, versatile machine, with pre-mill that is so economical! 

      The ME 35ET pre-mill unit is complete with two diamond tools, 80mm diameter. This allows for a clean edge and a good lineal finish during the pre-mill process. The pre-milling unit comes with an independent exhaust and air blower for cleaning of the panel during the process. You can carry out vertical adjustments of the tools for use even into the final sharpening phase.

      An interchangeable glue pot allows for easier access. The glue pot is Teflon coated to allow for easy clean up and easy glue replacement with a quick heat-up system. The system applies the glue to the panel with a vertical glue spreading roller, and the temperature is adjustable via the EYE-S control panel. This machine also has a device to automatically recover any unused glue.

      The high frequency motors generate high cutter rotating speed, reducing to a minimum any marks left from trimming and guaranteeing the absence of vibrations. These cutters are designed for straight or radius trimming of any type of edge.

      The special end-cutting unit with radius function is installed in place of the standard end-cutting unit. During the process of cutting off the front and rear exceeding edges (except for solid wood strips), it rounds off the angles of the edge banded panel. This creates a beautiful radius edge. This function is directly controlled with the operator interface at the control panel. 

      The Minimax 35ET comes with the Eye-S, a touch screen control panel loaded with features to make edge banding applications easy. It allows you to choose the type of material you’re working with (MDF, chipboard, etc.), set the height and thickness of material, and adjust the glue temperature and type, among other things. All edge banding functions are shown graphically on the screen, so it leaves little room for errors or confusion.

          • Pre-milling unit creates perfect joint lines

          • Interchangeable glue pot for PU accuracy

          • Intuitive EYE-S Touchscreen Control Panel allows user to select material size, control glue temperature, and many other edge banding functions

          • Rounding unit rounds thin and thick edges up to 3 mm

          • End cutting unit with radius function cuts off the front and rear exceeding edges and also performs the end rounding

          • Always accurate and high-speed cuts thanks to blade and high frequency motor

          • High productivity by the track feed speed

          • 9 meter/min panel feed speed with track movement for increased productivity with dual presser wheels and panel roller support on the entire length of the machine

          • Top thick steel pressure beam with rubber-coated wheels

          • Precise horizontal and vertical copying wheels have chrome plated surfaces, and assure accurate positioning of knives in relation to the cutting point

          • Excellent vibration-free finish thanks to the high-rigidity structure of the edge scraping unit

          Motor: 3-phase, 220V
          Pneumatic operating pressure: 6.5 bar
          Exhaust outlets – Pre-Milling Unit (x2): 3” (76 mm)
          Exhaust outlet - Glue Pot: 2.36” (60 mm)
          Exhaust outlets – Edgebander Unit Stations (x2): 2.36” (60 mm)
          Worktable dimensions: 118” x 20.6” (3,000 mm x 525 mm)
          Worktable height: 35.5” (904mm)
          Thickness of rolled edges: 0.4 - 3 mm
          Thickness of edges in strips: up to 5 mm
          Min. - max. panel height: 8 mm - 50mm (.315” – 1.96”)
          Min. panel length/width with rolled edges: 7.48”/4.33” (190/110 mm)
          Min. panel length cut only on the front: 4.72” (120 mm)
          Feed speed: 7 m/min (23 fpm)
          Feed motor power: 73Hp