icon SCM Minimax Sliding Table Saw - SC 3c | Backyard Provider Skip to content
Warranty

Manufacturer's warranty on most items

Great Discounts

Your favorite products on sale

 
Expert Assistance

Need help? Give us a call at 888 575-2099

Free Shipping

We offer free shipping

SCM Minimax Sliding Table Saw - SC 3c

SCM Minimax Sliding Table Saw - SC 3c

by SCM
SKU SC 3c
Save 6% Save 6%
$9,495.00
$9,495.00 - $9,495.00
$9,495.00
$8,925.99
$8,925.99 - $8,925.99
$8,925.99

  • CLEARANCE SALE.

  • ITEMS LEFT.

  • PEOPLE are also watching that product.


SCM Minimax Sliding Table Saw - SC 3c

The compact and highly precise circular saw with a low investment for DIY woodworkers and craftsmen. The Minimax SC 3C is a single-phase 4.8Hp motor slider that comes standard with scoring and can accommodate a 12” blade. Featuring a 5.5’ crosscut capacity that is ideal for processing panels, DADO capability, and 45° blade tilt.

The Minimax SC 3C can accommodate a large, 12” blade without removing the scoring blade. When not using the scoring, it can be dropped below the table easily. Scoring adjustments are external, no tooling. The Minimax SC 3C also has 3/4" DADO capability.

Featured standard scoring allows you to not only accurately cut panels, but you can cleanly cut them too. This is important when cutting particle board, melamine, laminated panels, or anything else to which you intend to apply some type of edge banding. If you are cutting solid wood, simply drop it below the table surface independently of the main blade. A 12” main blade capacity is featured without having to remove the scoring blade. The scoring is belt-driven from the main motor.

The Minimax SC 3C has a thick, cast-iron knuckle, to which the extruded aluminum rip fence is attached. It rides on a large 45 mm rectified steel round bar, and is locked in place with a cam design for maximum rigidity. It micro-adjusts into place via a rack and pinion design. This machine also comes with a separate miter gauge for miter cuts. This way, the operator can keep the main crosscut fence at 90° and use the separate miter gauge to do the angled cuts, saving time when mitering small panels.

Also featured is an additional table on the slider to assist in supporting larger panels. The sliding table lock allows the slider to be locked when pulled away from the blade that makes loading panels much easier. The Minimax SC 3C comes standard with two flip stops on the crosscut fence and two hand wheels for operating unit movement. One on the front of the machine for the main blade, and one on the side of the machine for your scoring blade.

      • 12” main blade capacity with scoring blade in place

      • Scoring (belt driven from main blade)

      • Dedicated scoring assembly independently adjustable

      • Anodized aluminum sliding table guidance system with hardened steel ways

      • Double trunnions on both saw and shaper assemblies

      • Automatic self-braking motors

      • Micro-adjustable rip fence with cam-locking system

      • Telescopic crosscut fence with two flip stops

      • 3/4" DADO capability

      • Riving knife, fully adjustable and removable

      • Eccentric workpiece clamp standard

      • Additional table on the sliding table for support of panels with large dimensions

      • Squaring frame (outrigger) with swing-arm support

      • Pre-set for rapid selection of angle-cuts on outrigger table

      • Tool set and operator’s manual

      • “CSA” - rated electrical components

      Fixed Table Size: 33” x 22” (840 x 560 mm)
      Squaring Stroke: 5.5’ (1,600 mm)
      Table Height: 34” (860 mm)
      Ripping Capacity, right side of saw blade: 50” (1,270 mm)
      Tilting Arbor: 0° - 45°
      Max. Cutting Height 0°/45°: 3.9”/3.1” (100/78 mm)
      Main Blade Diameter: 12.4” (315 mm)
      Main Blade Arbor Size: 5/8” (15.875 mm)
      Scoring Blade Diameter: 80 mm
      Scoring Blade Arbor Size: 20 mm
      Main Blade Speed: 4,000 RPM
      Scoring Blade Speed: 8,000 RPM
      Motor: Single-phase, 230V
      Horsepower: 4.8hp
      Recommended Circuit: 30 amp
      Main Dust Extraction Port Diameter: 4-3/4” (120 mm)
      Saw Guard Dust Extraction Port Diameter: 2.5" (60 mm)
      Minimum Suggested Extraction Volume: 900 CFM

       

       
       

      SCM Minimax Sliding Table Saw - SC 3c

      The compact and highly precise circular saw with a low investment for DIY woodworkers and craftsmen. The Minimax SC 3C is a single-phase 4.8Hp motor slider that comes standard with scoring and can accommodate a 12” blade. Featuring a 5.5’ crosscut capacity that is ideal for processing panels, DADO capability, and 45° blade tilt.

      The Minimax SC 3C can accommodate a large, 12” blade without removing the scoring blade. When not using the scoring, it can be dropped below the table easily. Scoring adjustments are external, no tooling. The Minimax SC 3C also has 3/4" DADO capability.

      Featured standard scoring allows you to not only accurately cut panels, but you can cleanly cut them too. This is important when cutting particle board, melamine, laminated panels, or anything else to which you intend to apply some type of edge banding. If you are cutting solid wood, simply drop it below the table surface independently of the main blade. A 12” main blade capacity is featured without having to remove the scoring blade. The scoring is belt-driven from the main motor.

      The Minimax SC 3C has a thick, cast-iron knuckle, to which the extruded aluminum rip fence is attached. It rides on a large 45 mm rectified steel round bar, and is locked in place with a cam design for maximum rigidity. It micro-adjusts into place via a rack and pinion design. This machine also comes with a separate miter gauge for miter cuts. This way, the operator can keep the main crosscut fence at 90° and use the separate miter gauge to do the angled cuts, saving time when mitering small panels.

      Also featured is an additional table on the slider to assist in supporting larger panels. The sliding table lock allows the slider to be locked when pulled away from the blade that makes loading panels much easier. The Minimax SC 3C comes standard with two flip stops on the crosscut fence and two hand wheels for operating unit movement. One on the front of the machine for the main blade, and one on the side of the machine for your scoring blade.

          • 12” main blade capacity with scoring blade in place

          • Scoring (belt driven from main blade)

          • Dedicated scoring assembly independently adjustable

          • Anodized aluminum sliding table guidance system with hardened steel ways

          • Double trunnions on both saw and shaper assemblies

          • Automatic self-braking motors

          • Micro-adjustable rip fence with cam-locking system

          • Telescopic crosscut fence with two flip stops

          • 3/4" DADO capability

          • Riving knife, fully adjustable and removable

          • Eccentric workpiece clamp standard

          • Additional table on the sliding table for support of panels with large dimensions

          • Squaring frame (outrigger) with swing-arm support

          • Pre-set for rapid selection of angle-cuts on outrigger table

          • Tool set and operator’s manual

          • “CSA” - rated electrical components

          Fixed Table Size: 33” x 22” (840 x 560 mm)
          Squaring Stroke: 5.5’ (1,600 mm)
          Table Height: 34” (860 mm)
          Ripping Capacity, right side of saw blade: 50” (1,270 mm)
          Tilting Arbor: 0° - 45°
          Max. Cutting Height 0°/45°: 3.9”/3.1” (100/78 mm)
          Main Blade Diameter: 12.4” (315 mm)
          Main Blade Arbor Size: 5/8” (15.875 mm)
          Scoring Blade Diameter: 80 mm
          Scoring Blade Arbor Size: 20 mm
          Main Blade Speed: 4,000 RPM
          Scoring Blade Speed: 8,000 RPM
          Motor: Single-phase, 230V
          Horsepower: 4.8hp
          Recommended Circuit: 30 amp
          Main Dust Extraction Port Diameter: 4-3/4” (120 mm)
          Saw Guard Dust Extraction Port Diameter: 2.5" (60 mm)
          Minimum Suggested Extraction Volume: 900 CFM