CleanFreak 12" Adjustable Glide Carpet Extractor Wand w/ 1 Jet - #08 Orifice - CPL-WFPT1V11008JG

CleanFreak 12" Adjustable Glide Carpet Extractor Wand w/ 1 Jet - #08 Orifice - CPL-WFPT1V11008JG

Looking for a wand that is able to out preform your common carpet drag wand? This single jet carpet extraction wand has you covered. The wand is able recover 30% more moisture from your carpeting than normal carpet wands, all thanks to an adjustable glide system that generates a consistent seal on the floor despite the angle you are using the wand at. View our diagram in the pictures to see how the self-adjusting glide (shown in orange) slides up and down as the angles change during use. The tighter seal created by the self-adjustment creates a better suction, resulting in quicker drying times and less stress on your body since less recovery passes are required. The glide allows you to use the wand with more of a natural movement to allow for consistent recovery across your whole extraction job.

This wand is the same wand that comes with packaged with the non-heated CleanFreak® 120 PSI carpet cleaning extractor, so if you are looking for a replacement, this is the right place to be. This wand is also not limited to this machine and can be used with any type of low pressure non-heated box style carpet extractors.

*Please Note: Even though the wand can handle up to 1000 PSI of pressure, the wand should only be used on non-heated machines with low pressure (100 - 200 PSI). The larger #08 orifice jet opening produces more water than #02 orifice found in our other 12" adjusting glide wand. With this extra output, the pumps will struggle to keep the water at a high PSI. The extra stress can lead to a shorter motor lifespan. We also sell replaceable non-heated brass jet tips for this wand if the jet ever wears out or becomes damaged.

The single jet lays down the solution evenly at a 110° angle across the entire width of the head of the drag wand. We also offer a dual jet wand w/ #4 spray tips if you are looking for a more consistent spray. A single #08 spray tip will lay down the same amount of water as dual #04 spray tips on a wand. Side wings are built into the wand's head to prevent any type of overspray from landing outside the spray range. The wand is lighter than typical drag wands. Add this benefit to the results of a dryer carpet, and less energy needed for extracting your carpets and you can see why this wand may be the right wand for your carpet extractor.

What our Experts Think

• High-performance single-jet extraction design — The #08 orifice delivers a strong, concentrated spray pattern for effective soil penetration and consistent carpet flushing.
• Built for deep cleaning efficiency — The 12" head width balances coverage and control, making it ideal for residential, commercial, and restoration carpet cleaning jobs.
• Adjustable glide system improves recovery — Maintains a tight, consistent seal across changing angles, helping improve suction and reduce leftover moisture in the carpet.
• Faster drying times with fewer passes — Better water recovery means operators spend less time re-cleaning the same area, improving overall productivity.
• Compatible with heated & non-heated extractors — Works with most box-style carpet extractors (recommended low-pressure range for best performance).
• Lightweight, operator-friendly design — Reduces fatigue during long cleaning sessions while maintaining professional-grade durability.
• Side-wing protection reduces overspray — Helps keep solution focused under the head for cleaner, more controlled extraction results.
• Ideal upgrade for professional cleaners — Especially suited for contractors looking to improve drying speed, extraction consistency, and job efficiency without switching machines.

Q&A

Q: What is the CleanFreak 12" Adjustable Glide Carpet Extractor Wand used for?
A: This wand is designed for professional carpet extraction, delivering deep cleaning on commercial and residential carpets using high-pressure solution and strong vacuum recovery.

Q: What makes the adjustable glide system important?
A: The adjustable glide head maintains a consistent seal on carpet fibers, improving suction efficiency and helping remove up to 30% more moisture for faster drying times.

Q: Is this wand compatible with heated extractors?
A: Yes. The CPL-WFPT1V11008JG is designed for use with both heated and non-heated box-style carpet extractors, depending on setup and jet configuration.

Q: What does the single jet with #08 orifice do?
A: The single jet delivers a wide, powerful spray pattern for efficient solution application and strong soil removal across the 12-inch cleaning path.

Q: What type of machines is this wand best for?
A: It works best with low-pressure carpet extractors (typically 100–250 PSI), making it ideal for professional carpet cleaning, janitorial services, and upholstery maintenance.

Q: Does this wand reduce operator fatigue?
A: Yes. The lightweight design and smooth glide action reduce push resistance, helping operators clean larger areas with less strain.

Q: Why choose a 1-jet wand instead of dual jet?
A: A single jet offers simpler operation, strong focused spray performance, and is often preferred for standard carpet cleaning and maintenance jobs.

Maintenance Tips