CleanFreak 12" Tynex Heavy Duty Scrub & Strip Brush for CleanFreak 'Performer 24' Auto Scrubber - IES-SPPV01511

• Ultra-aggressive Tynex grit brush system — Designed for the CleanFreak Performer 24, this 12" brush delivers heavy-duty abrasion for stripping wax, coatings, and deep-set grime from hard floors.
• Built for restoration-level cleaning — Ideal for concrete, terrazzo, and other durable surfaces where standard nylon brushes are not strong enough for embedded soil removal or finish stripping.
• Dual-brush configuration for full 24" coverage — Used as a pair on the auto scrubber to ensure even pressure distribution and consistent cleaning performance across wide commercial areas.
• Wet-operation required for safe use — Designed to run only in solution to prevent damage to both flooring and brush fibers during aggressive scrubbing and stripping tasks.
• Grit-impregnated bristles for faster stripping — Outperforms standard nylon brushes when removing floor finish buildup, reducing the number of passes needed on heavily coated floors.
• Not suitable for finished or delicate flooring — Excessively aggressive; best reserved for industrial environments and concrete-based surfaces to avoid damage.
• Wear-indicator design supports maintenance planning — Helps operators know when replacement is needed to maintain consistent cleaning results and avoid performance drop-off.

Q: What is the CleanFreak 12" Tynex Heavy Duty Scrub & Strip Brush (IES-SPPV01511) used for?
A: This brush is designed for aggressive scrubbing and stripping on the CleanFreak Performer 24 auto scrubber, removing heavy soil and old floor finish from concrete and other hard industrial surfaces.

Q: What makes this Tynex brush different from standard scrub brushes?
A: It uses grit-impregnated Tynex bristles, making it much more aggressive than nylon brushes and suitable for stripping wax, coatings, and deeply embedded dirt.

Q: What surfaces can it be used on safely?
A: It is intended mainly for concrete and other durable industrial flooring. It can damage finished tile or coated floors if used improperly.

Q: Is this brush for daily cleaning?
A: No. It is strictly a heavy-duty stripping and deep scrubbing brush, not for routine maintenance cleaning.

Q: Does it require wet use?
A: Yes. The brush must always be operated in a wet environment to ensure proper performance and prevent surface damage.

Q: What machine is it compatible with?
A: It is specifically designed for the CleanFreak Performer 24 auto scrubber system (two brushes required for operation).

Q: Does it help with floor stripping efficiency?
A: Yes. The abrasive bristles improve chemical and mechanical stripping performance, reducing the time needed to remove coatings and buildup. 

• Rinse the Tynex brush thoroughly after each use to remove debris, slurry, and chemical residue.
• Inspect bristles regularly for wear, matting, or uneven length and replace when performance declines.
• Use proper wet cleaning operation to reduce friction heat and extend brush life.
• Ensure correct installation on the Performer 24 auto scrubber for stable, balanced rotation.
• Clean the brush hub and mounting area to prevent buildup that can affect alignment and efficiency.
• Avoid using on delicate or finished floors not rated for Tynex scrubbing/stripping brushes.
• Rotate brush usage when possible to promote even wear across the 12" cleaning surface.
• Store in a dry, clean area off the floor to prevent bristle deformation and moisture damage.