CleanFreak 20" High Speed Floor Burnisher w/ Dust Control - 1500 RPM - KOB-00-4403-2

CleanFreak 20" High Speed Floor Burnisher w/ Dust Control - 1500 RPM - KOB-00-4403-2

This CleanFreak floor burnisher with dust control uses a 20" burnishing pad and a floor burnishing solution to achieve the highest shine possible on commercially finished floors. This machine spins those pads at 1500 revolutions per minute to create a deep and long lasting shine. The AC motor is designed to last up to 5x longer than our typical DC powered burnishers. The AC motor will actually cut out when you are the using machine if you are drawing too many amps, which will actually help to make the machine last for years and years. We even offer this model without dust control as just a 20 inch burnisher, if you're looking for something a little more economical.

The dust control portion of the machine makes sure that all the dust created from burnishing your floor is recovered in a convenient dust pouch on the front of the machine for easy disposal. This dust control feature helps to eliminate airborne dust contaminants, maintains healthy indoor air quality, and reduces labor costs. Your major labor savings are incurred by not having to recover that dust later, by either dust mopping, or scrubbing the floor again with an automatic scrubber, which in turn tends to dull the floor again.

If you're a beginner in the floor care profession, or a tried and true veteran, we recommend taking a peek at our how to properly burnish a floor manual for tips and hints on making your finish pop like no other.

Features

• Wide wheel base for easy start up and stability during burnishing.
• Fixed chromed steel handle allows the machine to easily float over your entire floor.
• Cast aluminum chassis w/ four 5" non marking wheels for transportation to job sites.
• Epoxy powder coated steel shroud with dust control for easy removal of all dust.
• Flex pad driver comes attached to machine, allowing pads to polish uneven floors.

Specifications

What our Expect Think

• 1,500 RPM Motor – High-speed polishing for a brilliant finish.
• 20" Cleaning Path – Covers large areas efficiently.
• Built-In Dust Control – Reduces airborne particles for a cleaner workspace.
• Heavy-Duty Construction – Designed for long-term commercial use.
• Ergonomic & Maneuverable – Smooth operation with user comfort in mind.

Q&A

Q: What is this burnisher used for?
A: It’s designed for high-speed polishing and restoring shine to hard floors in commercial and industrial settings.

Q: What is the RPM speed?
A: It operates at 1,500 RPM for a professional-grade gloss finish.

Q: Does it have a dust control system?
A: Yes, it features an integrated dust control system to minimize airborne particles.

Q: What type of floors is it suitable for?
A: It works best on finished hard floors like tile, marble, and vinyl.

Q: Is it easy to maneuver?
A: Yes, its ergonomic design and large wheels make it easy to operate.

Q: What power source does it use?
A: It runs on a standard 120V outlet.

Maintenance Tips

• Daily Cleaning – Wipe down the machine and empty the dust collection bag.
• Pad Care – Replace worn pads to maintain peak performance.
• Dust Control System – Check and clean filters to ensure proper airflow.
• Motor & Vent Maintenance – Keep vents clear to prevent overheating.
• Cord & Plug Safety – Inspect for damage before each use.
• Proper Storage – Store in a dry area to protect electrical components.