GOODMAN 3 Ton 13.4 SEER2 80% AFUE 80,000 BTU Gas Furnace and R32 Air Conditioner System - Downflow - AQ-GD9S800804BN

GOODMAN 3 Ton 13.4 SEER2 80% AFUE 80,000 BTU Gas Furnace and R32 Air Conditioner System - Downflow -  AQ-GD9S800804BN

The ACiQ AQ-GLXS3BN3610 is a cooling-only condenser unit. Providing a 13.4 SEER2 efficiency with a single stage, reciprocating compressor, the AQ-GLXS3BN3610 is an inexpensive condenser to cool your home when paired with an AC coil.

Features

• Ideal size to cover a medium-sized house
• 3 ton, 13.4 SEER2 AC-only condenser
• R32: Complies with Clean Air Act New Refrigerant Requirements
• Low sound output
• Fully charged for up to 15' of line set
• Factory-installed filter drier
  

Manual

• GLXS3B Specifications
• Installation Manual
• Warranty Information
• CAPFA Specifications Sheet
  
• GD9S80 Specifications Sheet
• GD9S80 Installation Manual

What our Experts Think

• Strong Capacity for Larger Homes: This system pairs a 3-ton R32 air conditioner with an 80,000 BTU 80% AFUE gas furnace, delivering reliable whole-home comfort for larger floor plans or higher load requirements.
• Straightforward, Budget-Friendly Heating: The 80% AFUE furnace prioritizes lower upfront cost and proven reliability, making it a practical choice where maximum heating efficiency is not the primary goal.
• Efficient Cooling with Modern Refrigerant: The 13.4 SEER2 R32 cooling system provides consistent performance and improved environmental compliance compared to older refrigerant-based systems.
• Downflow Configuration for Specific Installations: The AQ-GD9S800804BN downflow design is ideal for installations in attics or upper-level mechanical spaces where air must be distributed downward through ductwork.
• Balanced Airflow Performance: The integrated multi-speed ECM blower system supports steady air distribution, improved comfort consistency, and quieter operation during everyday use.
• Value-Focused Whole-Home Solution: This system is designed for homeowners who need higher capacity performance at a more accessible price point, especially in replacement scenarios.

Q&A

Q: What is the Goodman 3 Ton 13.4 SEER2 Gas Furnace & Air Conditioner System?
A: This complete HVAC system combines a 3-ton R32 air conditioner with an 80,000 BTU Goodman gas furnace, delivering dependable whole-home heating and cooling performance.

Q: What efficiency ratings does this system offer?
A: It provides up to 13.4 SEER2 cooling efficiency and 80% AFUE heating efficiency, offering balanced comfort and energy-conscious operation.

Q: What refrigerant does this system use?
A: The system uses R32 refrigerant, a modern low-global-warming-potential refrigerant designed to improve efficiency and reduce environmental impact.

Q: What installation type is this system designed for?
A: This package is configured for downflow installation, making it suitable for applications such as mobile homes, basements, or specific vertical airflow configurations.

Q: What size home is a 3-ton system suitable for?
A: A 3-ton system is typically recommended for medium to larger homes, depending on insulation, layout, and local climate conditions.

Q: Why choose the Goodman AQ-GD9S800804BN system?
A: Homeowners benefit from reliable Goodman performance, 13.4 SEER2 efficiency, 80% AFUE heating, and R32 refrigerant technology in a complete matched HVAC system designed for consistent year-round comfort.

Maintenance Tips

• Replace or clean the air filter every 1–3 months to maintain proper airflow and system efficiency.
• Keep the outdoor condenser unit clear of debris; maintain at least 24 inches of clearance on all sides.
• Schedule professional HVAC maintenance twice per year (spring for cooling, fall for heating).
• Clean evaporator and condenser coils annually to support efficient heat transfer and reduce energy use.
• Inspect and flush the condensate drain line regularly to prevent clogs, leaks, and moisture issues.
• Ensure proper airflow in downflow installations by keeping return paths and ductwork unobstructed.
• Check thermostat operation and replace batteries as needed for consistent temperature control.
• Have a licensed HVAC technician inspect burners, heat exchanger, blower motor, and gas connections annually.
• Verify proper venting and combustion safety for reliable furnace operation.
• Ensure all R32 refrigerant servicing is performed only by certified HVAC professionals.