CleanFreak 4.0 GPM Hot Water Pressure Washing Skid w/ Tank, Reels & Spray Gun (Gas Engine) – 3,500 PSI - WET-APODCF4-0001

CleanFreak 4.0 GPM Hot Water Pressure Washing Skid w/ Tank, Reels & Spray Gun (Gas Engine) – 3,500 PSI - WET-APODCF4-0001

This CleanFreak 4.0 GPM pressure washing system has a 225 gallon fresh water tank, a 14 HP Vanguard gas engine from Briggs & Stratton, a diesel fired heater, and is mounted to a steel framed skid. The steel frame has foklift channels to lift up and move the pressure washer skid around. It can be a portable unit that is moved around and transported around to different areas, or it can be permanently mounted in a truck bed or trailer. When permanently mounting, please check the vehicle or trailers gross weight limitations, as this skid will weigh approximately 3,800 pounds when the 225 gallon storage tank is filled with water.

The skid mount system comes with a 50' water supply line on a stainless steel reel, and 100' spray line that connects the spray gun, also on a stainless steel hose reel. Additional options for this unit include, a 21" or 24" flat surface cleaner, or dual hookups where 2 people can pressure wash simultaneously. The additional kit to run 2 spray guns simultaneously includes an additional 100' hose, reel, and gun.

With a 4 GPM output, this set up is perfect for most commercial cleaning jobs. It is "right sized" for cleaning store fronts, drive-thrus, outdoor eating areas, gas islands, and dumpster pads. We do have a 8.0 GPM set up available that is recommended for much larger jobs (20,000 ft² or more).

For other options, please take a look at our full lines of hot water gas and trailer mount pressure washers.

A 12 volt battery is required to run the burner on this unit, but is not included. We recommend going to a local Big Box store or a Batteries Plus to purchase a Group 12 Deep Cycle Battery for use with this system.

Features

• 4 GPM pump is the right size for many commercial jobs, like store fronts, drive-thrus, outdoor eating areas, gas islands, dumpster pads & more.
• Skid has forklift channels to move about as needed, or it can be permanently mounted to a truck bed or a trailer.
• 225 gallon water storage tank can be constantly fed by the 50' hose, which is attached to the rear of the unit on a stainless steel reel.
• Skid can be set up to run 2 pressure washer guns at the same time.
• 100' hose allows for large area cleaning without having to move the main unit.

What our Experts Think

                   
Q&A    

Q: What is the CleanFreak 4.0 GPM Hot Water Pressure Washing Skid used for?
A: This commercial skid-mounted pressure washer is designed for heavy-duty cleaning of concrete, equipment, vehicles, storefronts, parking lots, and industrial surfaces using high-pressure hot water at 3,500 PSI.

Q: What power and performance does this unit deliver?
A: It runs a 14 HP Vanguard gas engine with a 4.0 GPM pump and up to 3,500 PSI, providing strong cleaning power for demanding commercial and industrial jobs.

Q: Does it include a water tank and hose system?
A: Yes. It features a large onboard water tank (about 225 gallons) plus integrated hose reels with long supply and spray hoses for extended reach and continuous operation.

Q: Is this system heated?
A: Yes. It includes a diesel-fired heating coil that delivers hot water cleaning, making it more effective on grease, oil, and heavy grime.

Q: What makes a skid-mounted pressure washer useful?
A: The skid frame allows it to be forklifted, mounted in a truck bed or trailer, and used as a mobile cleaning station for job sites or fleet cleaning operations.

Q: Who is this pressure washer best for?
A: It is built for professional contractors, municipalities, and commercial cleaning crews needing high-output hot water pressure washing for frequent heavy-duty use.

               
Maintenance Tips