Curtron SPD-30-SS-GK-DBL-5484 54" x 84" Service-Pro Series 30 Double Swing Door - CUSPD30SSGKDBL5484
The Curtron SPD-30-SS-GK-DBL-5484 Swing Door is ideal for separating dining areas from kitchen areas. It reduces noise and, thereby, increases customer satisfaction. It has a durable 18 gauge stainless steel exterior and 0.750" exterior grade wood core. It has a full perimeter gasket. The SPD-30-SS-GK-DBL-5484 Swing Door has two 27" x 84" door panels and two 9" x 14" clear windows. It includes a hinged assembly and bottom pin.
Features
- (2) 27" wide x 84" high door panels
- 18 gauge stainless steel exterior
- Full perimeter gasket
- 0.750" exterior grade wood core
- (2) 9" x 14" clear windows
- No kickplate / impact plate
- Hinged assembly and bottom pin
Specifications
- Model: SPD-30-SS-GK-DBL-5484
- Dimensions: 84" H x 54" W
- Approximate Weight: 177 lbs.
What our Experts Think
-
Ideal Mid-Width Format (54″ × 84″) — Provides easy access for personnel and carts while maintaining a manageable frame and installation footprint.
-
Durable Core Construction — 0.750″ exterior-grade wood core offers structural resilience for constant commercial use.
-
Premium Finish Options — Series 30 design with stainless-steel or laminate/aluminum exterior suits hygiene and aesthetic requirements.
-
Visibility & Safety — Each panel includes a 9″ × 14″ clear vision window to reduce collision risk and improve sightlines.
-
Full-Perimeter Gasket (“GK” Variant) — Enhances sealing for better airflow control, noise reduction, and zone separation.
Q&A
Q: What are the dimensions of this door?
A: The door is designed for a 54″ wide × 84″ high opening.
Q: What does the model code “SS‑GK‑DBL‑5484” mean?
A: “SS” = stainless steel exterior, “GK” = full‑perimeter gasket, “DBL” = double swing (two panels), “5484” = 54″ width × 84″ height.
Q: How many panels are included and what are their sizes?
A: Two swing panels, each approximately 27″ wide × 84″ high.
Q: What are the construction materials and core?
A:
-
Exterior: Stainless steel
-
Core: 0.75″ exterior‑grade composite wood
-
Windows: Each panel has a 9″ × 14″ clear viewing window
-
Gasket: Full‑perimeter sealing gasket
Q: Where is this door typically used?
A: Ideal for commercial kitchens, service corridors, retail backrooms, and high-traffic areas where two-way swing access and a durable stainless steel finish are needed.
Q: What installation considerations should be checked?
A: Confirm the rough opening is 54″ × 84″, ensure adequate swing clearance for both panels, and verify that the surrounding frame can support a stainless steel double-swing door with full-perimeter gasket.
Q: Is the door fire-rated?
A: No, this model is not fire-rated.
Q: Does the door include a frame?
A: No, the frame is typically supplied separately.
Q: Are kickplates or impact plates included?
A: No, these are not included unless specified.
Q: What maintenance is recommended?
A: Clean stainless steel surfaces regularly, inspect hinges and gasket for wear, and keep windows clear.
Maintenance Tips
-
Clean panels and gaskets regularly – Use mild soap and warm water to wipe stainless steel and full‑perimeter gaskets; dry thoroughly. Avoid harsh or abrasive cleaners.
-
Inspect hardware monthly – Check hinges, bolts, mounting plates; look for looseness or wear and tighten or replace as needed.
-
Lubricate moving parts every 3–6 months – Apply light grease or silicone spray to hinge cams, pivot pins and bottom pins to ensure smooth two‑way swing.
-
Check alignment and seals – Ensure both panels close evenly, gaskets remain intact and no gaps exist for proper energy‑efficiency and hygiene.
-
Maintain surface finish – Use non‑abrasive cloths, avoid scouring pads or solvent cleaners to protect stainless steel and vinyl surfaces.
