icon DC Audio 2.0k - 2,000w Monoblock Amplifier DCA-2K | Backyard Provider Skip to content
Warranty

Manufacturer's warranty on most items

Great Discounts

Your favorite products on sale

 
Expert Assistance

Need help? Give us a call at 888 575-2099

Free Shipping

We offer free shipping

DC Audio 2.0k - 2,000w Monoblock Amplifier DCA-2K

DC Audio 2.0k - 2,000w Monoblock Amplifier DCA-2K

by DC Audio - SHCA
SKU DCA-2K
Save 6% Save 6%
$674.99
$674.99 - $674.99
$674.99
$634.99
$634.99 - $634.99
$634.99

  • CLEARANCE SALE.

  • ITEMS LEFT.

  • PEOPLE are also watching that product.


DC Audio 2.0k - 2,000w Monoblock Amplifier DCA-2K

The 2.0kw competition series amplifier is a 2,000 watt mono block. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator.

For power inputs it will accept 0 awg for power and 0 awg for ground.

 

• 1 ohm stable
• Variable low pass filter
• Variable subsonic filter
• Variable bass boost
• Wired remote control
• Clipping indicator


• 1 upgraded battery under the hood
• 1 extra battery in the rear
• Minimum of one 0 awg ran from the front battery to the rear battery
• Upgraded aftermarket alternator
• Dash mounted voltage meter

  Features Voltage 2.0kw
Output Power (RMS) 4 ohm 14.4V 600W x 1
2 ohm 1,200W x 1
1 ohm 2,000W x 1
1 ohm 16V No
1 ohm 18V No
Input Sensitivity     6V~0.2V
Low Pass Filter Switchable    
( @ 24 dB Slope) Variable Hz 35~250
Subsonic Filter Switchable    
( @ 24dB slope ) Variable Hz 10~50
Bass Boost Variable dB 0-9dB
Frequency Response   Hz 15-270
Signal to Noise Ratio   dB 100
Damping factor     150<
Efficiency @ 4ohm   % Over 90%
THD @ 4ohms     Less than 0.1%
Fuse Rating     200 Amps
Linked Fuse Rating     400 Amps
Indicator Power   Yes
Protection   Yes
Clip   Yes
Speaker & Power terminal Mold Type    Yes
Power Gauge 0Ga
Heatsink Length inch/mm   17.72" / 450mm
Heatsink Width inch/mm   9.38"/238mm
Heatsink Height inch/mm   2.35"/59.6mm

 

 
 

DC Audio 2.0k - 2,000w Monoblock Amplifier DCA-2K

The 2.0kw competition series amplifier is a 2,000 watt mono block. It is a linkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped. It comes with a bass knob and a clipping indicator.

For power inputs it will accept 0 awg for power and 0 awg for ground.

 

• 1 ohm stable
• Variable low pass filter
• Variable subsonic filter
• Variable bass boost
• Wired remote control
• Clipping indicator


• 1 upgraded battery under the hood
• 1 extra battery in the rear
• Minimum of one 0 awg ran from the front battery to the rear battery
• Upgraded aftermarket alternator
• Dash mounted voltage meter

  Features Voltage 2.0kw
Output Power (RMS) 4 ohm 14.4V 600W x 1
2 ohm 1,200W x 1
1 ohm 2,000W x 1
1 ohm 16V No
1 ohm 18V No
Input Sensitivity     6V~0.2V
Low Pass Filter Switchable    
( @ 24 dB Slope) Variable Hz 35~250
Subsonic Filter Switchable    
( @ 24dB slope ) Variable Hz 10~50
Bass Boost Variable dB 0-9dB
Frequency Response   Hz 15-270
Signal to Noise Ratio   dB 100
Damping factor     150<
Efficiency @ 4ohm   % Over 90%
THD @ 4ohms     Less than 0.1%
Fuse Rating     200 Amps
Linked Fuse Rating     400 Amps
Indicator Power   Yes
Protection   Yes
Clip   Yes
Speaker & Power terminal Mold Type    Yes
Power Gauge 0Ga
Heatsink Length inch/mm   17.72" / 450mm
Heatsink Width inch/mm   9.38"/238mm
Heatsink Height inch/mm   2.35"/59.6mm