GE Dial ¼” cc x ¼” cc Straight Compression Needle Valve - 11223260

GE  Dial ¼” cc x ¼” cc Straight Compression Needle Valve - 11223260 

•  ¼" cc x ¼" cc Straight Needle Valve
• Low Lead Level – Less Than 0.25%

What our Experts Think

• Precision micro-flow control for appliance lines
  The GE / Dial 1/4” cc x 1/4” cc straight compression needle valve is designed for fine adjustment of water flow, making it ideal for icemakers, humidifiers, and low-volume plumbing feeds.
• Compact straight-through design
  Its inline body allows clean installation in tight spaces, while maintaining a direct flow path between 1/4" compression tubing connections.
• Reliable brass construction
  Built from durable brass for long service life and corrosion resistance in residential water systems, including cold-water appliance connections.
• Low-lead compliant water safety design
  Engineered to meet modern potable-water standards with low lead content on wetted surfaces, suitable for household use.
• Smooth needle adjustment (not just on/off)
  Unlike ball valves, this design allows gradual flow restriction, helping prevent pressure spikes and enabling precise tuning of water delivery.
• Standard 1/4” compression compatibility
  Works with common 1/4” copper or poly tubing used in refrigerator and appliance water supply lines, making it a widely used service valve format.
• Service-friendly appliance component
  Frequently used in ice maker and refrigerator hookups, where technicians need controlled shutoff and adjustable flow without disconnecting lines.

Q&A

Q: What is this needle valve used for?
A: It is used to control and fine-tune water flow in small ¼-inch tubing lines, commonly for icemakers, evaporative coolers, and appliance water connections.

Q: What are the connection sizes?
A: It features ¼” compression x ¼” compression (CC x CC) straight fittings for standard low-flow plumbing setups.

Q: What type of valve is it?
A: It is a straight needle valve, designed for precise flow adjustment rather than full on/off shutoff.

Q: What material is it made of?
A: It is typically made of brass with a low-lead design (≤0.25%) for potable water applications.

Q: Where is it commonly used?
A: Ideal for refrigerators, icemakers, evaporative coolers, and small appliance water supply lines.

Q: Does it allow precise water control?
A: Yes, the needle design provides fine, adjustable flow regulation for accurate control of water output.

Q: Is installation difficult?
A: No, it installs using standard ¼-inch compression fittings—no soldering required.

Q: Is it lead-safe for home use?
A: Yes, it is manufactured to meet low-lead requirements for residential potable water systems.

Maintenance Tips

• Operate Periodically: Turn valve open/close occasionally to prevent sticking or mineral buildup in the needle seat.
• Check for Leaks: Inspect compression fittings regularly for drips or moisture around joints.
• Avoid Over-Tightening: Hand-tighten only—excess force can deform ferrules and damage sealing performance.
• Keep Clean Exterior: Wipe brass body to prevent corrosion, dust buildup, or grime around threads.
• Monitor Flow: Reduced or uneven flow may indicate internal clogging or scale buildup.
• Protect from Harsh Conditions: Avoid freezing temperatures and chemical exposure that can weaken seals.
• Inspect Tubing Connections: Ensure copper or tubing stays firmly seated in compression fittings.
• Replace if Faulty: Swap out if valve becomes stiff, leaks persist, or cannot fully shut off flow