Durston 1036 Olivia F130 Flat Rolling Mill With 50-1 Reduction Gear - 128.175

Durston 1036 Olivia F130 Flat Rolling Mill With 50-1 Reduction Gear - 128.175

The Durston Olivia F130 Rolling Mill is a revolutionary machine designed to make hand rolling accessible to everyone. Powered by a 50-to-1 reduction gearbox and a large flywheel, the Olivia allows jewelers and metalsmiths to roll metal with minimal effort — including those who find traditional rolling mills difficult to operate due to limited strength or mobility. The front-facing wheel and compact footprint mean you can mount the Olivia beside your bench and work comfortably while seated.

This is the full flat Olivia, Durston model 1036, featuring a 130mm flat roll and four half-round sizes on the extension rolls. The side extension rolls allow straightforward rolling of half-round shanks in 4, 3, 2, and 1.5mm sizes. Whether you are doing reduction work on sheet metal or forming wire profiles, the Olivia's super-easy gear ratio makes precise, consistent rolling achievable for any skill level.

Like all Durston mills, the Olivia features self-lubricating, maintenance-free bearings and hardened helical drive gears with a special form engineered for maximum drive efficiency. A calibrated dial with pointer on both top wheels provides precise, easy-to-read gap measurement. The Olivia can be mounted on a sturdy benchtop or on either the Durston pedestal stand or Durston cabinet stand (sold separately).

Durston rolling mills are renowned for holding their value better than virtually any other tool in the jeweler's studio.

Features

• 50-to-1 reduction gearbox (Patent Pending) for effortless rolling with minimal physical effort
• Large flywheel aids smooth, controlled metal reduction
• Front-facing wheel design enables comfortable seated operation
• 130mm full flat roll for sheet and flat stock work
• Four half-round side extension rolls: 4mm, 3mm, 2mm, and 1.5mm
• Self-lubricating, maintenance-free bearings
• Hardened helical drive gears with special form for maximum drive
• Calibrated dial with pointer on both top wheels for precise gap measurement
• Compatible with Durston pedestal stand and Durston cabinet stand
• Made in Great Britain

Specifications

What our Experts Think

• Revolutionary ease-of-use design: The Durston 1036 Olivia F130 (128.175) introduces a patent-pending 50:1 reduction gearbox, making rolling dramatically easier even for low-effort or seated operation.
• Built for effortless control: The ultra-high reduction ratio allows smooth sheet reduction with minimal physical strain, ideal for extended studio sessions and precision work.
• Full 130mm flat rolling surface: Designed exclusively for flat sheet work (plus side half-round extension options), ensuring consistent, clean reduction across wider metal stock.
• Accessibility-focused performance: Engineered for users who need improved ergonomics—supporting seated operation and reduced fatigue without sacrificing industrial durability.
• Professional-grade build quality: Cast body construction with induction-hardened rolls and precision calibration ensures long-term reliability and workshop consistency.
• Studio productivity upgrade: The extreme gear reduction improves control over fine adjustments, making it especially valuable for delicate rolling, texture prep, and repeatable sheet thinning workflows.

Q&A

Maintenance Tips

• Clean rollers after every use: Remove metal dust from the 130mm flat rolls and side extensions to prevent surface marking and maintain precision.
• Protect induction-hardened rolls: Apply a thin coat of anti-rust oil when idle, then wipe clean before use to avoid contamination and corrosion.
• Care for 50:1 gearbox: Keep gears lightly greased (lithium-based grease recommended) and ensure smooth, consistent rotation without forcing the handle.
• Use gradual reductions: The high-torque system works best with light, staged passes to protect gears and maintain alignment.
• Keep extension grooves clean: Regularly clear 4, 3, 2, 1.5 mm half-round channels to ensure accurate wire and shank forming.
• Check roller alignment: Ensure consistent parallel adjustment for even sheet thickness and smooth rolling performance.
• Avoid dirty or hardened metal: Only roll clean, annealed material to prevent damage to rolls and gearbox stress.
• Store in dry conditions: Cover when not in use and protect from humidity to prevent rust on cast body and steel components.