Jabsco 12V Electric Conversion Kit [29200-0120] - CWR-31427

Jabsco 12V Electric Conversion Kit [29200-0120] - CWR-31427

Features

• Directly replaces manual pump assembly
  
• Easy to Install
  
• Simple to operate
  
• Dual action control allows water level to be varied
  
• Fits all Jabsco and Par 29090 and 29120 standard and large bowl toilets. Adaptors available to fit many other makes
  
• Suitable for use in above or below waterline installations
  
• Built in macerator
  
• Meets EN50081-2 for Electro Magnetic Compatibility (EMC)
  
• Meets ISO 8846 MARINE and USCG 183.410 for Ignition protection
  
• Self priming up to 0.6m(2ft)
  
• Waste pump discharges over an anti siphon loop up to 1.8m(6ft) and out of a through hull fitting down to 0.9m(3ft) below the surface
  
• Typical power consumption is less than 1.0 amp hour(12 Volt)

What our Experts Think

• Effortless upgrade from manual to electric — Directly replaces a manual toilet pump assembly with an electric motor, speeding up flushing and eliminating hand pumping.

• Versatile and easy to install — Simple setup works in both above and below‑waterline installations and fits standard Jabsco and Par 29090/29120 toilets, with adaptors available for other models.

• Built‑in macerator for cleaner operation — Integrated chopper reduces blockages and improves waste flow through anti‑siphon loops up to roughly 1.8 m (6 ft).

• Low power draw, high efficiency — Typical consumption is less than 1 amp‑hour at 12 V, easing strain on boat electrical systems while providing dependable flushing power.

• Certified for marine use — Engineered to meet EN50081‑2 EMC standards and ISO 8846/USCG 183.410 ignition‑protection requirements for safety and compliance.

• Self‑priming and flexible discharge — Self‑primes from up to ~0.6 m (2 ft) and supports discharge below the waterline as well as through hull fittings down ~0.9 m (3 ft).

Q&A

Q: What is the Jabsco 12V Electric Conversion Kit used for?
A: Converts manual marine or RV pumps to 12V electric operation for easier, hands-free use.

Q: Is it compatible with existing Jabsco pumps?
A: Yes — designed for compatible Jabsco manual diaphragm pumps, enabling fast and reliable conversion.

Q: How is it powered?
A: Operates on 12V DC, suitable for standard marine and RV electrical systems.

Q: Is it easy to install?
A: Yes — simple installation with included hardware and instructions for quick conversion.

Q: What condition is the kit in?
A: Brand new, factory-sealed Jabsco 12V Electric Conversion Kit [29200-0120] (CWR-31427).

Maintenance Tips

• Verify compatibility with your existing manual or pump system before installation

• Check all electrical connections for secure attachment and proper polarity

• Inspect wires and terminals for wear or corrosion before each use

• Ensure fuses and circuit protection are correctly rated for 12V operation

• Test the conversion kit before regular use to confirm proper function

• Keep components clean and dry to prevent shorts or damage

• Follow manufacturer’s installation instructions carefully for safety

• Avoid overloading the system beyond recommended voltage or current

• Inspect hoses, fittings, and seals after installation for leaks

• Store unused components in a cool, dry place to prevent corrosion