JRCO 38" Front Mount Hooker Aerator (751.JRC)

JRCO 38" Front Mount Hooker Aerator (751.JRC)

JRCO 38' Front Mount Hooker Aerator (751.JRC)

The JRCO Front Mount Hooker Aerator is designed for the lawn care professional. It saves time and labor with high-production aeration. Aerate 66,000 square feet per hour at 5 mph.

The 38-inch wide JRCO Front Mount Hooker Aerator attachment for zero turn mowers punctures up to six holes per square foot. Holes are approximately 1/2' wide by 1-1/4' long and up to 3' deep. Tines pierce deep into the soil, hooking and lifting loose plugs of dirt that disperse quickly, spreading nutrients over the surface. No unsightly hard plugs accumulate on the lawn. The lifting action of the tines prevents soil compaction that is common with hollow tine aerators and allows good filtration of air and water into the lawn.

Each of the three caster assemblies has two floating cast iron tine rotor heads. The casters swivel, allowing turning while aerating. The six floating rotor heads independently lift over tree roots and rocks while the other heads continue to aerate.

Features

• Hooking tines lift soft soil plugs
  
• Aerator heads caster allowing zero-turn maneuverability
  
• Electric actuator lifts aeration heads for transport
  
• Switch control for electric lift mounts on operator control arm
  
• Hardened steel one-piece rotor assemblies and hardened axles for long life
  
• Aerator frame supported by caster wheels with heavy-duty yokes
  
• Independent rotor heads lift over rocks or roots while remaining heads continue aerating
  
• Aerator attaches to JRCO mount bar with 2 clevis pins
• Front mount bar NOT included.

Manufacturer: JRCO
Aeration Width: 38'
Aeration Pattern: 5' X 6'
Hole Size: 1/2' wide x 1.25' long, up to 3' deep
Tines: 3/8' W x 3' L hardened high carbon alloy steel
Productivity: 66,000 sq. ft. per hour
Shipping Weight: 198 lbs
Dimensions: 35'L x 38'W x 16'H
Warranty: 1 Year Limited