KRAUS Kore 28" Drop-In Workstation 16 Gauge Stainless Steel Single Bowl Kitchen Sink with Accessories - KWT310-28
Cook, serve, and entertain in style with KRAUS Kore Workstation Sinks. Engineered with an integrated ledge to support custom sliding accessories, this sink creates a multifunctional workspace to streamline all your kitchen tasks from meal prep to cleanup. The kit includes a heavy-duty cutting board and roll-up dish rack that allow you to work right over the sink without losing space on the kitchen counter. Kore sinks are made with KRAUS TRU16 the thickest 16-gauge stainless steel for maximum durability. Ideal for retrofitting into an existing countertop cutout, the versatile dual-mount design installs as an undermount or drop-in with any type of kitchen counter material. The extra-thick 4mm mounting deck sits flat against the countertop for a perfectly finished look, with two pre-drilled holes for easy installation of a kitchen faucet and soap dispenser. The high-capacity single bowl sink creates an uninterrupted working surface with ample space for large cookware and stacks of dishes. Thick NoiseDefend sound dampening pads absorb noise and vibration for an ultra-quiet experience. Wear-resistant finish is easy to clean and not prone to corrosion, while rounded corners on the sink bottom reduce buildup over time. Channel grooves and a sloped bottom improve drainage, with a rear off-set drain that adds storage space underneath the sink. The installation-ready sink comes with a protective stainless steel bottom grid and drain assembly with matching cover for a clean look.
Note from DirectSinks about the KWT310-28 - We know Sinks. We also know that a 28" Top Mount Sink is a rare find. Great News: If you have a 30" Cabinet, this sink has you covered. Not bad considering It's a Workstation Sink from Kraus, made of 16 Gauge Stainless Steel, and includes accessories! Although we show this sink as a Top Mount sink, this sink can also be undermouted according to Kraus. Either way, this is a great Workstation Sink for a 30" Cabinet.
Features
WORKSTATION SINK with integrated ledge for sliding accessories so you can prep, cook, and clean up without losing any workspace on the kitchen counter
DIMENSIONS: OUTER SINK DIMENSIONS: 28" L x 22" W x 9 1/2" D BOWL DIMENSIONS: 26" L x 16" W x 9" D MINIMUM CABINET SIZE: 30"
SINK KIT INCLUDES: Stainless steel workstation sink, heavy-duty bamboo cutting board, roll-up dish drying rack, protective stainless steel bottom grid, drain assembly and decorative drain cover
HEAVY-DUTY 16 GAUGE STEEL: Constructed from ultra-durable KRAUS TRU16 the thickest 16-gauge stainless steel for superior resistance to dents and damage
DROP-IN / UNDERMOUNT DESIGN: Ideal for retrofitting, the dual-mount design installs as an undermount or drop-in with any type of countertop material
EXTRA-THICK 4mm deck sits flat against the countertop, with a beveled ledge for easy cleaning 2 pre-drilled holes allow for installation of kitchen faucet and accessory
UNIVERSAL DESIGN with clean lines and tight-radius corners works with any decor from traditional to modern, enhancing your kitchen with functionality, style, and lasting value
SPACIOUS SINGLE BOWL offers generous workspace for large cookware and stacks of dishes Rear offset drain creates an uninterrupted work surface and increases storage in the base cabinet
ULTRA QUIET SINK: NoiseDefend sound dampening technology with large super-silencer pads on all sides of the sink helps prevent noise and vibration from dishes and garbage disposals
FULLY INSULATED with anti-condensation undercoating to reduce the risk of moisture build-up, helping prevent damage to sink and cabinets
SUPERIOR DRAINAGE: rear center set drain openings and sloped bottom with channel grooves help prevent water from pooling in the sink OPTIMIZED SLOPE helps keep your fragile stemware from tipping over
HEAVY-DUTY BAMBOO CUTTING BOARD is not prone to cracking or warping, with a non-slip design and built-in grooves that prevent spills Easy to clean non-porous surface is resistant to odors and stains
ROLL-UP DISH DRYING RACK made with heavy-duty stainless steel and non-slip silicone is perfect for drying dishes right over the sink. Holds up to 85 lbs., dishwasher-safe, heat-safe, and rolls up for easy storage
STAINLESS STEEL BOTTOM GRID with soft rubber bumpers promotes better draining and helps protect the surface of your sink from scratches and dents by keeping dishes elevated
Explore the full suite of KORE Sink Accessories to maximize the functionality of your KORE Workstation sink
Certs: ASME A112.19.3-2008/CSA B45.4-08, Uniform Plumbing Code (UPC), National Plumbing Code of Canada, International Plumbing Code (IPC)
Collection Name: Kore
Installation Type: Top Mount: Typically installed in laminate or wood counter tops
Stainless Steel Thickness: 16 Gauge
Warranty: Limited Lifetime
Sink Certifications: cUPC (ASME A112.19.3/CSA B45.4)
What Our Experts Think
-
Space-saving 28" workstation sink with integrated ledge for sliding accessories
-
Premium 16-gauge stainless steel ensures durability and dent resistance
-
Drop-in design makes installation simple and versatile for any countertop
-
Includes useful accessories: bamboo cutting board, roll-up dish rack, drain assembly, and bottom grid
Q&A
Q: What material is the sink made of?
A: Heavy-duty 16-gauge T304 stainless steel for long-lasting performance.
Q: What accessories are included?
A: Roll-up dish drying rack, bamboo cutting board, bottom grid, and strainer.
Q: Is this sink easy to install?
A: Yes, the drop-in design allows quick installation with any countertop type.
Q: What size base cabinet is required?
A: Fits a minimum 30" base cabinet.
Maintenance Tips
-
Rinse and dry after use to prevent water spots or buildup
-
Clean with mild soap and a non-abrasive sponge
-
Keep included accessories dry after cleaning for longer lifespan
-
Use a protective bottom grid to prevent scratches from heavy cookware
