Quatro SolderPure 220V-Solder/Waxing/Smoke Fume Extractor - SPB-560-26I-1BM

The Quatro SolderPure line of Fume extractors are specially designed to source capture solder smoke & fumes before they migrate throughout your workshop.

147.628 SPB-560-26I-1BM  220V for removing soldering, waxing smoke and odors. This is the Quatro SolderPure SWS (Solder/Waxing/Smoke) Fume Extractor.

SolderPures have a 3 stage filtering system with the final stage containing a special 2" thick charcoal filter. This Solder/Waxing/Smoke fume Extractor contains the standard charcoal filter.

SolderPures do not need to be vented, as they are 99.9% efficient in removing harmful smoke and odors from the workplace. SolderPures are mounted on casters for shop mobility. Noise is not a problem as the whisper quite SolderPure operates at only 52 dba. This SolderPure is rated at 170 CFM.

SolderPures have 2 ports on top (photo shows one with a red cover cap, the other with the included Quatro AA006 Flex Extraction Arm with Slide Valve) so you can set up a two different fume collection stations.

SolderPures have a 1st stage dust filter, a 2nd stage HEPA filter and a 3rd stage high density charcoal fume filter. The final 3rd stage filters are refillable with fresh filtering material as needed. These special filters are found in the SolderPure series, the Ductless Fume Hood series and the CollectALL. 

SolderPures can be attached to an optional foot pedal,#AA175 , for turning off and on, or the mc2 automatic control box, that can make your flex shaft foot control (or other piece of equipment like a foot controled wax pen) an on/off switch for the SolderPure. The SolderPure measures 20" high by 12-3/4" wide by 15-3/4" deep and has a shipping weight of 56 lbs and is standard 115V/60C.