Trusted Clean Vacuum Motor Head Assembly for the Trusted Clean 'Quench' Wet/Dry Vacuum - CPL-VA00075A-DEMO

Trusted Clean Vacuum Motor Head Assembly for the Trusted Clean 'Quench' Wet/Dry Vacuum  - CPL-VA00075A-DEMO

This vac motor was found to be faulty on a brand new machine. The float assembly and seal plate were replaced. It has been inspected, cleaned up, and refurbished to ensure it is in like new condition. This unit does not include the original packaging and may have some nicks and scratches. It comes backed with a 90 day refurbished motor warranty.

This vac motor assembly is a replacement part for the Trusted Clean 'Quench' wet/dry vacuum. It is a complete assembly that includes the full head, vac motor, power cord, seal plate and the float ball assembly.

We recommend using a defoaming solution with the 'Quench' whenever recovering any type of liquid in volume. Before each use, you'll want to make sure the float assembly is free and clear, and can move up and down easily. If it does not work properly, it can allow foam through the seal plate and into the vac motor causing it to fail. If the float assembly becomes stuck open, the vac motor can heat up and weld the seal plate to the bottom of the vac motor. The only way to fix that is to then replace this whole assembly.

What our Experts Think

• Core power assembly for suction performance
  The VA00075A motor head assembly is the complete vacuum power unit for the Trusted Clean “Quench,” driving all wet/dry recovery suction.
• All-in-one replacement design
  Includes the vacuum motor, head cover, seal plate, float system, and power cord, making it a full plug-and-play restoration part.
• Restores full water recovery efficiency
  Ensures the machine maintains strong airflow and proper float shut-off, helping achieve dry-to-the-touch floor recovery performance when operating correctly.
• Critical safety and overflow protection system
  Integrated float and seal plate prevent water or foam from entering the motor, protecting the system from costly motor failure and suction loss.
• Commercial-duty construction
  Built for continuous use in floor cleaning, restoration, and industrial wet pickup applications, where reliability is essential.
• Direct OEM compatibility (no modification needed)
  Designed specifically for the Trusted Clean “Quench,” ensuring perfect fit, correct sealing, and proper electrical connection.
• Fast restoration of machine uptime
  Replacing the entire head assembly minimizes downtime compared to repairing individual components.
• Demo value advantage
  Refurb/demo units provide near-new performance at a reduced cost, ideal for maintaining equipment fleets economically.

Q&A

Q: What is the Trusted Clean Vacuum Motor Head Assembly used for?
A: It is a complete replacement motor head that powers the Trusted Clean ‘Quench’ wet/dry vacuum, delivering suction and controlling liquid recovery performance.

Q: What does this assembly include?
A: It includes the vacuum motor, head housing, power cord, seal plate, and float ball assembly—all in one pre-built unit for full replacement.

Q: Is this an OEM part?
A: Yes—it is an OEM-style replacement assembly designed specifically for the Trusted Clean Quench vacuum system for proper fit and performance.

Q: Is this a new or refurbished unit?
A: This is a demo/refurbished unit—fully inspected, cleaned, and tested, with possible minor cosmetic wear and a limited warranty.

Q: What does the float assembly do?
A: It prevents liquid overflow into the motor by shutting off suction when the recovery tank reaches capacity, protecting the motor from damage.

Q: What is the suction performance like?
A: The assembly delivers strong commercial suction (around 95 CFM airflow), designed for heavy-duty wet and dry recovery tasks.

Q: When should this motor head be replaced?
A: Replace it if the vacuum loses suction, the motor fails, or the float/seal system becomes damaged or stuck.

Q: Is installation difficult?
A: No—it is a drop-in replacement assembly designed to quickly restore full vacuum function with minimal downtime.

Q: What surfaces is the Quench vacuum used for?
A: It is used for liquid recovery on hard floors, stripping solutions, and general commercial wet/dry cleaning.

Maintenance Tips

• Keep Motor Head Dry: Prevent any water intrusion into the motor assembly to avoid electrical failure and short circuits.
• Clean Air Vents Regularly: Remove dust and debris buildup to maintain airflow and prevent overheating.
• Filter Maintenance: Clean or replace filters frequently to protect motor performance and maintain strong suction.
• Float System Check: Ensure float shut-off operates freely to prevent liquid from reaching the motor head.
• Electrical Inspection: Check wiring, connectors, and switches for wear, looseness, or heat damage.
• Noise/Vibration Monitoring: Address unusual sounds or vibration early to prevent motor damage.
• Secure Fitment: Ensure motor head is properly seated and sealed on the tank for safe and efficient operation.
• Proper Storage: Store in a dry, ventilated area to prevent corrosion and extend motor lifespan.