RIDGID 53117 K-3800 W/C-32 Drum Machine For 3/4" To 4" Drain Lines, with C-32 3/8" x 75'. Inner Core Cable & Tool Set, 115V

RIDGID 53117 K-3800 W/C-32 Drum Machine For 3/4" To 4" Drain Lines, with C-32 3/8" x 75'. Inner Core Cable & Tool Set, 115V

Features:

• Rugged, corrosion-resistant molded cable drum won't dent or rust. The drum tilt adjusts for proper Cable feed angle
• Cable drum's quick release and built-in hand-holds allow easy cable change and transport
• Maximum drum capacity is 100' (30.5 m) of 3/8 inch (10 mm) or 90' (27 m) of 1/2 inch (12 mm) continuous length cable ideal for cleaning through 3/4 inch (20 mm) to 1.5 inch (40 mm) sink traps
• Powerful 175W Universal motor spins Cable at 240 RPM

Details:

The RIDGID K-3800 is a powerful, easy to transport, versatile machine for cleaning indoor drains requiring minimal set-up to clean sink lines, floor drains and roof vents. The 175 Watt motor drives the drain cleaning snake at 240 RPM (Rotations Per Minute) to work through stoppages. It features a pneumatic foot actuator control for On/Off and is reversible when using the optional AUTOFEED assembly (RIDGID #60087; A3800PF). The C-32 Inner Core cable has is an ideal choice for kitchen sinks, lavatory sinks, slop sinks and laundry stacks. It has good flexibility, and as torque builds the outer spring tightens on wire core causing the cable to stiffen and transfer greater torque to the cutter. Includes: RIDGID K-3800 Drum Machine, (1) 3/8-inch x 75-foot drain snake cable, T-202 Bulb Auger, T-205 "C" Cutter, T-211 Spade Cutter, A-13 Pin Key, (1) pair RIDGID work gloves, and operator's manual. RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength, and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

What Our Experts Think

• Heavy‑duty press accessory kit: The RIDGID 20483 2‑1/2″–4″ ProPress Standard XL‑C/XL‑S Jaw & Ring Kit provides large‑diameter pressing capability for commercial, industrial, and large residential plumbing.

• Versatile compatibility: Works with RIDGID Standard Series press tools and both ProPress XL‑C (copper) and XL‑S (stainless) fittings.

• Improved accessibility: The V2 actuator jaw features a 180° swiveling design and jaw ID clips for easy pressing in tight or awkward spaces.

• Complete kit: Includes three press rings (2‑1/2″, 3″, 4″), V2 actuator jaw, and rugged carrying case for ready-to-use operation.

Product Q&A

• What sizes does this kit cover?
  2‑1/2″, 3″, and 4″ connections on copper or stainless‑steel tubing.

• Which press tools is it compatible with?
  RIDGID Standard Series pressing tools (CT‑400, 320‑E, RP 330‑B/C, RP 340, RP 350).

• Can it press both copper and stainless?
  Yes — compatible with ProPress XL‑C (copper) and XL‑S (stainless) fittings.

• Is the kit easy to transport?
  Yes — comes with a rugged carrying case for convenient jobsite use.

Maintenance Tips

• Clean after use: Wipe press rings and actuator jaw to remove debris.

• Inspect for wear: Check rings and jaw edges before pressing.

• Store properly: Keep components dry in the carrying case to prevent rust and impact damage.

• Check compatibility: Always use the correct ring size and orientation for the fitting.

• Follow tool guidelines: Use only with RIDGID Standard Series press tools and ProPress fittings.