Rockford Fosgate 10" 600W 2-Ohm Punch Series Car Audio Subwoofer P2D210 (4 Pack) - 194505

Rockford Fosgate 10" 600W 2-Ohm Punch Series Car Audio Subwoofer P2D210 (4 Pack) - 194505

The 4-pack of Rockford Fosgate P2D2-10 10" 600 Watt 2-Ohm Punch Series Car Audio Subwoofers will provide "The Punch" you desire. This sub features Kevlar fiber reinforced paper cones that will deliver superior bass impact; VAST technology that increases the cone surface area up to 25%; an Anodized Voice Coil Former that provides superior heat dissipation (up to 100° at full power levels); A Flex Fit Basket that allows fine-tuning of the mounting position; Stitched Tinsel Leads that reduces fatigue and possible shorting while increasing reliability and performance. The P2D2-10 sub performs best in standard sealed and vented enclosures, and conforms to CEA-2031 industry standards to offer the capacity to handle power under continuous demand, not instantaneous power handling, that over time, can damage voice coils. If you are looking for thumping bass, look no further than the Rockford Fosgate P2D2-10 10" 600 Watt 2-Ohm Punch Series Subwoofer!

• NEW Rockford Fosgate P2D2-10 10" 600 Watt 2-Ohm Punch Series Car Audio Subwoofer (4-pack)

• Power Handling

• 600 Watts MAX

• 300 Watts RMS

• Kevlar fiber reinforced paper cone

• Stitched Tinsel Leads

• Anodized Aluminum Voice Coil Former

• Flex Fit Basket

• VAST Surround

• Dual linear spider with embedded 16 AWG tinsel leads

• Custom 10-AWG nickel plated push terminals

• StampCast basket with integrated spider venting

• Protective PVC textured magnet cover

• High-temp voice coil with spun-laced Nomex® re-inforcement collar

• Extended pole piece and bumped vented backplate

• Diamond cut cast aluminum trim ring with optional grille (grille insert not included)

• CEA-2031 Compliant

• Powerful Bass Output: Each subwoofer delivers up to 600 watts of peak power, ensuring impactful and precise low-frequency sound.
• 2-Ohm Dual Voice Coils: Offers flexible wiring options for optimized performance with various amplifiers and configurations.
• Compact 10-Inch Design: Delivers robust bass while fitting easily into smaller enclosures for versatile installation.
• Rugged Build Quality: Constructed with durable materials to withstand high-demand use and ensure long-term reliability.
• 4-Pack Convenience: Perfect for creating a multi-subwoofer setup or equipping multiple vehicles with consistent, high-quality bass performance.

Q: What is included in this package?
A: This package contains four Rockford Fosgate 10" Punch Series subwoofers, each rated at 600 watts peak power with a 2-ohm dual voice coil configuration.

Q: What is the power handling capacity?
A: Each subwoofer delivers 600 watts peak power (300 watts RMS), ensuring deep and impactful bass performance.

Q: What is the impedance of these subwoofers?
A: These subwoofers feature a 2-ohm dual voice coil (DVC) design, offering versatile wiring options to match various amplifier setups.

Q: What type of enclosures are recommended?
A: These subwoofers are compatible with both sealed and ported enclosures, allowing for customized bass output based on your preferences.

Q: How does the sound quality perform?
A: The Punch Series delivers powerful, tight, and accurate bass, making it ideal for music lovers seeking a high-quality car audio experience.

• Clean Regularly: Wipe the subwoofer cone and surround with a soft, dry cloth to remove dust. Avoid using water or abrasive cleaners.
• Inspect Wiring: Check terminals and connections periodically to ensure they are secure and free of corrosion or wear.
• Operate Within Limits: Keep power levels within the 600W rating to avoid overheating or damaging the voice coils.
• Monitor Enclosure: Ensure the subwoofer enclosure is sealed and intact for optimal sound quality and vibration control.
• Provide Adequate Ventilation: Ensure proper airflow around the subwoofers to prevent overheating, especially during extended use.
• Secure Mounting: Verify that the subwoofers are firmly installed to avoid movement, rattling, or distortion.
• Break-in Period: Play at moderate volume for the first 10-15 hours to allow the components to settle and achieve peak performance.
• Protect from Moisture: Keep the subwoofers in a dry environment to prevent damage to electrical components and materials.