Backwoods Adventure Toyota Tacoma (2005-2023) Full Aluminum Skid Plate System - BWTT3A-8710

Backwoods Adventure Toyota Tacoma (2005-2023) Full Aluminum Skid Plate System - BWTT3A-8710

Our all aluminum Tacoma skid plate system for 2005-2023 Toyota Tacomas are made from beefy 1/4" aluminum and offer great, light weight protection that won’t weigh you down. No rust, no excessive weight, and full undercarriage protection.

This full skid plate system includes an engine skid, transmission skid, and transfer case skid that nest into each other to create one solid piece for full undercarriage protection. In addition, if you have our Backwoods Tacoma Front Bumper, you can also purchase and install our connector plate that covers the gap between the front bumper and the top of the engine skid. The result is a seamless, completely protected front end.

Features

• Made in the USA
• Comes with FREE black powder coat
  
• (Does not come raw/unpainted like shown in photos)
• Skids made from beefy 0.25" thick aluminum
• Crossmember support made from HD steel
  
• Removable door for easy access to drain oil drain
• All grade 8 hardware
• Incorporated drain holes for airflow, mud, and water
  
• Optional connector plate made to integrate into our Front Bumpers
• Total weight: 77 lbs
• Optional connector plate weight: 7 lbs

What our Experts Think

• Full underbody protection system for serious trail use – The BWTT3A-8710 is a complete bolt-on skid plate kit for 2005–2023 Toyota Tacoma, designed to shield the engine, transmission, and transfer case as a unified armor system.
• Lightweight 1/4” aluminum construction – Built from thick-grade aluminum, it delivers high impact resistance with significantly lower weight than steel, helping preserve suspension performance and fuel efficiency.
• 3-piece integrated protection design – The system includes engine skid, transmission skid, and transfer case skid, which interlock into a continuous underbody shield for maximum coverage.
• Seamless front-end integration option – Compatible with Backwoods front bumpers via an optional connector plate that closes the gap between bumper and skid system, reducing exposed vulnerable components.
• Trail-focused durability engineering – Experts note the design prioritizes rock impact distribution across the frame instead of drivetrain components, reducing risk of expensive off-road damage.
• Service-friendly design touches – Includes features like access doors and drainage points, allowing easier oil changes and mud/water evacuation without full removal.
• 100% bolt-on installation – No welding required; designed for direct frame mounting using OEM-style points and grade 8 hardware.

                   
Q&A        

Q: What is the Backwoods Adventure Toyota Tacoma (2005–2023) Full Aluminum Skid Plate System (BWTT3A-8710)?
A: A 3-piece, full underbody protection system designed for 2nd and 3rd Gen Toyota Tacoma trucks, built from lightweight 1/4" aluminum to protect critical drivetrain components during off-road driving.

Q: What areas does it protect?
A: It includes engine, transmission, and transfer case skid plates that interlock to form a continuous underbody shield for maximum coverage.

Q: What material is it made from?
A: Constructed from 1/4-inch aluminum with reinforced steel crossmember support for strength while keeping weight low and corrosion-free.

Q: Is it heavy?
A: No. The full system weighs approximately 77 lbs, making it significantly lighter than comparable steel skid systems.

Q: Does it work with aftermarket bumpers?
A: Yes. It is designed to integrate with Backwoods front bumpers using an optional connector plate for seamless front-end protection.

Q: Is installation difficult?
A: No. It is a 100% bolt-on system designed for straightforward installation using included hardware.

           
Maintenance Tips    

• Rinse after every off-road trip: Remove mud, sand, and road salt from all skid panels, seams, and mounting points
• Inspect mounting bolts regularly: Re-torque hardware after installation, impacts, or heavy trail use
• Check for dents and impact marks: Aluminum is designed to absorb hits—inspect after rock contact to ensure no mounting shift
• Clear packed debris: Remove mud or gravel buildup between skid plates and frame to prevent moisture trapping
• Protect against galvanic corrosion: Ensure no prolonged moisture stays between steel hardware and aluminum plates
• Touch up scratches early: Helps prevent oxidation on exposed aluminum edges or coating damage
• Avoid direct high-pressure blasting at seams: Prevents forcing debris into mounting interfaces
• Seasonal full inspection: Check alignment, bolt torque, and panel overlap before long overland trips
• Verify access points remain functional: Ensure drain holes, oil access, and service openings stay clear