Breezaire WKL 6000 Wine Cooling Unit - 1500 Cu. Ft. Wine Cellar
Breezaire WKL 6000 Wine Cooling Unit - 1500 Cu. Ft. Wine Cellar
Breezaire WKL 6000 Wine Cooling Unit - 1500 Cu. Ft. Wine Cellar
Breezaire WKL 6000 Wine Cooling Unit - 1500 Cu. Ft. Wine Cellar
Breezaire WKL 6000 Wine Cooling Unit - 1500 Cu. Ft. Wine Cellar

Breezaire WKL 6000 Wine Cooling Unit - 1500 Cu. Ft. Wine Cellar

Free Shipping
80 Peoples are also watching that product.
Vendor: Breezaire
SKU: WKL 6000
$3,556.00
$4,699.00
$3,556.00
Material: Without Black Stainless Steel
Subtotal: $3,556.00
authorized dealer, shop your favorite brand.
Expert Support,

Dial 888-575-2099

Limited Supply,

grab it before it's gone.

Lowest prices,

As low as possible.

All Item are brand New,

Never used.

Recently Viewed Products

Breezaire WKL 6000 Wine Cooling Unit - 1500 Cu. Ft. Wine Cellar

Poor wine, Disgusting taste, Something smells or tastes off? Does that describe the wine you have had? Well its clearly because you have not had your wine aging in the proper environment, But that's why you are here. With the Breezaire WKL 6000 you will improve your wine! We can guarantee that with this system in your wine cellar your wine will age with perfection and your wine will be luxurious when it touches your tongue. Heaven's door will open to you, and that's because of the Breezaire WKL 6000

Adjustable Temperature
The ideal temperature for storing and aging wine is between 50 and 60 degrees Fahrenheit. Each BREEZAIRE system includes an adjustable thermostat that makes it possible for the user to precisely control the conditions in the wine cellar. When initially bringing the temperature down to the desired level and in maintaining the target temperature, the system produces a gentle stream of cool air never a blast of cold air that could subject the wine to abrupt temperature changes.

Automatic Humidity Control
Humidity must be present in the wine cellar to prevent cork and label deterioration. The gentle cooling action of the system maintains the relative humidity in the 50 to 75 percent range, eliminating excess moisture but never allowing the air to become dry enough to create an undesirable condition. (Additional moisture may be required in extremely dry climates.)

Vibration Control
All BREEZAIRE systems are engineered to control vibration by dampening mounts throughout the cooling system. All units are hand assembled and tested to ensure that they meet the most exacting standards, resulting in a wine that has greater clarity and brilliance.

Ultra-Quiet Operation
BREEZAIRE systems perform their task quietly and unobtrusively to preserve the atmosphere of isolation from the outside world that makes a visit to a wine cellar a unique experience.

Attractive Metal Cabinet
An attractive metal cabinet that blends in with the décor of your cellar area and can be flush mounted to any wall.

Ease of Installation
BREEZAIRE's most popular systems are completely self-contained modules that are simply mounted in a wall and connected to a standard 115 AC source. No plumbing, complicated wiring or special procedures including the on-site installation of refrigerant are required.

Uncompromising Quality
All BREEZAIRE systems are designed to deliver superior performance. Constructed using only the highest quality components, and hand assembly by skilled craftsmen in our U.S. production facilities.

Comprehensive Warranty Coverage
Owners enjoy the security of warranty coverage that reflects BREEZAIRE ’s high standards.

Full Factory Support    
Support in the form of expertise in system selection, enclosure design, and enclosure problem solving is just a phone call away.

Keep your valued wine collection at the perfect temperature no matter what with the Breezaire WKL Series Wine Cellar Cooling System, 1500 cu.ft.  WKL 6000

The unit comes equipped with Breezaire's Sentry III digital electric control system, which includes a control panel with an easy to read, a green LED display.

The Sentry III's intelligent programming automatically monitors your temperature and fan speed to make sure you never encounter any problems.

The system also protects against damage inflicted by power outages as well as temperature issues caused by condenser blockage or fan failure.

Breezaire WKL Series Wine Cellar Cooling System, 1500 cu.ft.  WKL 6000 can efficiently cool rooms sized up to 1500 cubic feet.  

The Breezaire Wine Cooler Unit w/ Sentry III - 1500 Cu. Ft. easily mounts through a wall in your wine cellar and vents to an adjacent room to reliably maintain the appropriate temperature. Before installation, make sure that your cellar is properly and insulated and that the room to which you vent is the same size or larger than your cellar.

Wine Served Right: The Breezaire Wine Cooler Unit w/ Sentry III - 1500 Cu. Ft. will ensure that you always serve your favorite wines at the right temperature while maintaining ideal humidity levels for aging

Quiet and Vibration-Free Operation: Breezaire cooling systems are designed to be nearly silent and unobtrusive, and without any subsequent vibration the unit will almost go undetected in your cellar

Protect Your Investment: Wine can be expensive, and the WKL6000 guards your investment by helping make sure bottles never turn and age in the best environment possible

Please Note: These products are not currently UL or ETL tested.

* BLACK Series Cooling Units (upgraded) are special order, so they require some time for production and no returns or cancellations will be accepted once the order has been placed.

Dimensions
Height 22'
Width 16.25'
Depth 22.25'
Capacity
Enclosure Volume Up to 1500 Cu. Ft.
Weight
Weight 101 lbs.
Warranty
Labor 1 Year
Parts 5 Years
Key Features
Electronic Controls Yes
Digital Temperature Display LED Readout
Humidity Control Automatic
Defrost System Automatic
Exhaust Direction Rear
Electrical
Electrical Requirements 115 V, 60 Hz - 9.5 A

 

The Standard Configuration for Breezaire's is for the power cable to plug into the wine cellar side. Some installations require the power cord to plug into an adjacent space then you can upgrade to the cord to come out the back of the unit.

The Cord out Back is considered to be a special order request and thus makes the cooling unit non-returnable. Customer will need to make a hole in the back grill to accommodate the cord placement. The cord will be located on the bottom back right of the Cooling Unit. 

Please Note: Adding this item may add 3-4 weeks to the production and of your unit.
If your application requires top exhaust you can order this optional modification to your Breezaire Unit. The Hot exhaust air up modification allows hot air to be exhausted out the top of the cooling unit. You will still need to allow for room to allow for proper air circulation for fresh air intake. For example: if your cooling unit is installed in a wine cabinet, you will still need to leave room behind the cabinet for fresh air intake.

The Hot exhuast air up is considered to be a special order request and thus makes the cooling unit non-returnable

Please Note: Adding this item may add 3-4 weeks to the production and of your unit.

3 Photo of Bottle Probe for Breezaire Wine Cooler Unit Bottle Probe for Breezaire WKL, WKE and WKC Series cooling units. A bottle probe is highly recommended if your wine cellar is installed in a warm area.

 

Bottle Probe (Optional)

The BREEZAIRE Bottle Probe can be used on all models. The bottle probe is used when you want to control the temperature of the wine cellar according to the liquid in the bottles. When the bottle probe is plugged into the unit it will take place of the internal air sensor.

How to use the Bottle Probe:

Allow the enclosure to stabilize at the desired temperature for several days (72hours). Using a normal size wine bottle clean bottle and then fill it with water insert the bottle probe into the bottle, and place it in the enclosure. Do not connect the bottle probe to the unit until the bottle has sufficient time to cool to the enclosure temperature (72 hours). Connect the bottle probe to the outlet located on the face of the unit. The on and off operation of the unit is now controlled by the temperature of the liquid in the bottle. The temperature displayed is that of the liquid in the bottle. Unplugging of the bottle probe will return the unit to the internal air sensor and will be reading the wine cellar temperature. The bottle probe cord is 5’ long.

 

 

Related Products

Recently Viewed Products