Miller Welding Crosby G-209 2 inch Load Tested Screw Pin Anchor Shackle-35 Ton WLL-Reconditioned - 1018650 LT

Miller Welding Crosby G-209 2 inch Load Tested Screw Pin Anchor Shackle-35 Ton WLL-Reconditioned - 1018650 LT

Load Tested at 125%

Meets performance requirements of Grade 6 shackles

Forged, Quenched & Tempered, with alloy pins

Working Load Limit and Grade 6 permanently shown on every shackle

Hot-dip galvanized (G)

Sizes 3/8" and below are mechanically galvanized

Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles

Shackles 25t and larger are RFID equipped

Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification; proof testing and certification available when requested at the time of order, charges will apply

Approved for use at -40° C (-40° F) to 204° C (400° F)

All 209 and 210 shackles can meet charpy requirements of 42 Joules (31 ft-lb) avg. at -20° C (-4° F) upon special request

Meets or exceeds all requirements of ASME B30.26

Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and ABS Guide for Certification of Lifting Appliances available; certificates available when requested at time of order and may include additional charges

G-209 Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade A, Class 2, except for those provisions required of the contractor

Look for the Red Pin... the mark of genuine Crosby quality

SPECIFICATIONS

MPN: 1018650 Model - G-209 Size - 2" Type - Screw Pin Anchor Material - Carbon Steel WLL (tons) - 35 WLL (lbs) - 77,000 Safety Factor - 6:1 Inside Length - 7.75" Inside Width - 5.75" Throat Opening - 3.25" Pin Diameter - 2.25" Approx. Weight (lbs) - 45

What our Experts Think

Q&A

Q: What is the Miller 12VS X-Treme Portable Suitcase MIG Wire Feeder?
A: It is a compact, portable wire feed unit (“suitcase feeder”) designed to deliver MIG or Flux-Cored wire in field welding applications.

Q: What is it used for?
A: It is used by welders to perform on-site MIG/FCAW welding when paired with a compatible constant voltage (CV) power source.

Q: Why is it called a “suitcase” feeder?
A: Because it is compact, enclosed, and portable, with a handle and rugged case for easy transport to job sites.

Q: What welding processes does it support?
A: It supports MIG (GMAW) and Flux-Cored (FCAW) welding processes.

Q: What is the benefit of a remote wire feeder?
A: It allows the wire drive system to be placed near the weld area, reducing cable length issues and improving arc stability in field conditions.

Q: Is it portable?
A: Yes. It is designed specifically for field portability and rugged jobsite use.

Q: What type of power source does it require?
A: It must be connected to a compatible Miller constant voltage welding power source.

Q: What are the key features?
A: Key features include durable casing, adjustable wire feed speed, compatibility with multiple wire sizes, and reliable feed performance.

Q: What industries use it?
A: It is used in construction, pipeline welding, structural steel fabrication, shipbuilding, and maintenance work.

Q: What does “reconditioned” mean?
A: It means the unit has been previously used, inspected, tested, and restored to working condition, though cosmetic wear may be present.

Q: Why use a suitcase feeder instead of a built-in feeder?
A: It improves mobility, allows welding at distance from the power source, and is ideal for large or hard-to-reach job sites.

Maintenance Tips