Bells Of Steel Folding Rack 2.3" x 2.3" (5/8" Holes) - FOL-PR

Bells Of Steel Folding Rack 2.3" x 2.3" (5/8" Holes) - FOL-PR

I get it, your garage is TECHNICALLY for your car. But you know what's better than a car garage? A garage GYM! Have the best of both worlds with this wall-mounted folding squat rack.

A simple hinge and pin system allows you to quickly remove the pull-up bar after a workout, then fold the sides of the squat rack inwards against the wall to open up a massive amount of space. Superior 1" spacing through the bench and pull zone, and 2" spacing above and below allow you to select the perfect height for your j-cups, for precision lift-offs that can make the difference between a good rep and a superb rep.

Rated to 600-pound static weight capacity. It features 2.3" x 2.3" tubing with 1" holes, which is only compatible with our 60mm rack attachments.

A large selection of accessories are available to add versatility and excitement to your workouts, such as lever arms and/or a monolift attachment.

A single 2" x 10" stringer (not included) must be tied into a minimum of 4 studs. It is NOT recommended to install the Fold Back Rack on a wood, drywall, or metal stud wall without a stringer or additional support.

What our Experts Think  

• A best-in-class “light commercial” rack for serious home gyms. The Light Commercial Power Rack delivers a strong 2.3" × 2.3" steel frame with ⅝" holes, giving you a stable foundation for heavy squats, benching, and advanced rack work.
• Exceptional value thanks to included accessories. It ships with J-cups, roller J-cups, spotter straps, band pegs, and a pull-up bar—essentially covering most foundational lifting needs out of the box.
• Designed for safety-first training. Heavy-duty spotter straps and solid uprights support confident solo lifting, especially for bench press and squat variations where failure training is common.
• Smart hole spacing improves precision. Extra-close 1" spacing in the bench and pull zone allows highly accurate bar positioning, which matters for comfort, performance, and long-term progression.
• No need to bolt to the floor (in most setups). The flat-foot base design increases stability through surface contact, making it suitable for garage and home gym environments without permanent installation.
• Highly expandable ecosystem. Built around a 2.3" × 2.3" standard, it supports a wide range of attachments for future upgrades like pulleys, lever arms, and specialty stations.
• Best suited for: home gym lifters who want a durable, future-proof rack that can grow into a full training system without immediately moving into premium commercial pricing tiers.
• Expert tip: this rack shines most when paired with at least one cable or lat attachment—turning it from a basic lifting station into a complete strength and hypertrophy setup.

                 
Q&A

Q: What is the Bells Of Steel Light Commercial Power Rack (LCM-PR-SET)?
A: A heavy-duty strength training rack by Bells of Steel built with 2.3” x 2.3” steel uprights and ⅝” holes, designed for home gyms and light commercial facilities.

Q: What exercises can I do with it?
A: Squats, bench press, overhead press, rack pulls, deadlifts (inside rack), pull-ups, and a wide range of accessory barbell movements.

Q: Is it strong enough for heavy lifting?
A: Yes, it’s engineered for high-load barbell training and progressive overload, suitable for serious strength athletes.

Q: What makes it “light commercial”?
A: It uses upgraded steel construction and durability standards beyond typical home racks, making it suitable for moderate daily gym use.

Q: Is it compatible with attachments?
A: Yes, it supports 2.3” x 2.3” rack accessories like J-cups, safety arms, dip stations, and storage add-ons.

Q: Does it include a pull-up bar?
A: Yes, most setups include a multi-grip pull-up bar for upper-body strength training.

Q: Who is it best for?
A: Lifters who want a stable, long-lasting rack for heavy training at home or small fitness studios needing commercial-style durability.

                   
Maintenance Tips      

• Wipe uprights, J-hooks, safety arms, and pull-up bar after each session to remove sweat and chalk
• Inspect frame, welds, and hardware regularly for tightness, wear, or movement
• Tighten all bolts periodically to maintain rack stability under heavy loads
• Ensure J-hooks and safety arms are properly seated and locked before every lift
• Avoid dropping bars excessively on safeties to reduce long-term wear and noise
• Keep ⅝" holes and attachment points clean and free of debris for secure fitting
• Check pull-up bar grip and knurling area for buildup and clean as needed
• Store in a dry indoor environment to prevent rust and finish degradation
• Use protective flooring (rubber mats) to improve stability and reduce impact stress
• Proper maintenance ensures safe lifting, structural integrity, and long-term durability for Bells Of Steel Light Commercial Power Rack (2.3" x 2.3", ⅝" HOLES)