Imer Stucco and Fine Coatings Gun Kit - 1107010

Imer Stucco and Fine Coatings Gun Kit - 1107010

The fine coatings application gun is primarily needed for spraying thinner coats of materials such as acrylic stucco and coatings. This attachment and accessories are compatible with Imer Mighty Small 50 and Koine series pumps and does not require a compressor for use.

Features

• Designed for spraying thinner coats such as acrylic stucco and coatings
• Fits Imer Mighty Small 50 and Koine series pumps
• For use without the compressor for pointing, filling in cracks and joints in between stone walls

What our Experts Think

• Professional fine-coating spray system attachment
  The IMER Stucco and Fine Coatings Gun Kit (Ref. 1107010) is a specialized spray gun kit designed for applying thin-layer materials such as stucco, waterproofing coatings, and grout on construction surfaces.
• Optimized for precision finishing work
  Built for acrylic stucco, elastomeric coatings, and crack/joint filling, making it ideal for detailed masonry and facade finishing tasks.
• Multiple nozzle control for different textures
  Includes adjustable deflectors (typically 5 mm to 12 mm), allowing controlled output for fine spray or heavier coating applications.
• Extended reach for job-site efficiency
  Comes with long material and air hoses (often 30–50 ft range depending on kit version), enabling wide-area application without constantly moving equipment.
• Designed for IMER pump systems (not standalone)
  Works with IMER Koine 35 / Mighty Small 50 pumping units, forming a complete professional spraying setup rather than a handheld sprayer.
• Built-in cleaning & maintenance tools included
  Supplied with cleaning sponge and nozzle tools, helping maintain consistent spray quality and extend equipment lifespan.
• Expert insight
  This kit is best seen as a finishing-stage accessory, not a heavy plastering tool—focused on controlled, smooth application rather than high-volume material output.

Q&A

Q1: What is the Imer 1107010 Stucco and Fine Coatings Gun Kit used for?
A: It is a professional spray gun kit for applying fine coatings such as acrylic stucco, waterproofing, elastomeric coatings, and cement-based finishes on construction surfaces.

Q2: What materials can it apply?
A: It is designed for thin-layer applications like stucco finishes, crack filling, tuck-pointing, joint sealing, and surface coatings up to fine material consistency.

Q3: What equipment is it compatible with?
A: It is mainly used with IMER pump systems such as Koine 35 and Mighty Small 50, ensuring proper pressure and material flow for spraying.

Q4: What comes included in the kit?
A: The kit typically includes a spray gun, multiple deflectors (5mm–12mm), long material hoses, air hose, and cleaning tools for maintenance.

Q5: Can it be used without a compressor?
A: Yes, it can operate in certain applications like tuck-pointing and crack filling without a compressor, depending on setup and material.

Q6: What makes it suitable for professional work?
A: It supports controlled application of fine coatings, long hose reach for large areas, and consistent spray output for construction-grade finishing work.

Q7: What types of jobs is it best for?
A: It is ideal for stucco finishing, waterproofing, masonry repair, crack injection, and decorative wall coating applications.

Q8: Why choose the Imer 1107010 kit over standard spray guns?
A: It is designed for heavy-duty construction materials and pump systems, offering more power, durability, and consistency than standard paint sprayers.

Maintenance Tips

• Flush immediately after use: Clean spray gun, hoses, and nozzles with water or approved solvent to prevent stucco or coating buildup and clogging.
• Clean nozzle deflectors daily: Remove dried material from 5–12 mm deflectors to maintain consistent spray pattern and finish quality.
• Purge both material & air hoses: Run clean water through hoses after each job to avoid internal blockages and pressure loss.
• Inspect spray gun seals & trigger: Check O-rings and valve action regularly to prevent leaks and uneven flow.
• Never store with material inside: Even thin coatings can harden and permanently block internal passages.
• Keep couplings clean: Ensure cam-lock and Geka fittings stay debris-free for stable pressure and safe operation.
• Use cleaning tools provided: Sponge ball + nozzle cleaner help extend tool life and maintain factory spray performance.
• Dry storage only: Store fully dried components in a case to prevent corrosion and residue buildup.