Nemco Easy FryKutter with 4 Section Wedge - NE554504

Nemco  Easy FryKutter with 4 Section Wedge - NE554504

The Nemco 55450-4 Easy FryKutter is durable, easy to use, and time-saving. It saves labor and improves productivity with its efficient design. It can be used to chop many fruits and vegetables into 4-section wedges. It can be mounted on either the wall or countertop for increased versatility. It has an exclusive short-throw handle and superior engineering which provides the leverage necessary for smooth, easy cutting in a single stroke! It allows operators to simply use their natural body motion to eliminate any awkward stretching to reduce operator fatigue.

Features

• Chops many fruits vegetables
• 4-section wedge
• Wall or countertop mount
• Saves labor
• Improves productivity
• Exclusive short-throw handle and superior engineering
• Provides the leverage needed for smooth, easy cutting or wedging in just one stroke
• Simply use your natural body motion to eliminate awkward stretching and reduce operator fatigue
• Built to last for years under the toughest conditions
• The standard slide-in, slide-out wall bracket fits the same mounting holes as most other machines

Specifications

What our Experts Think

• Efficient Cutting: Quickly transforms whole potatoes (up to 6" in length) into four uniform wedges with a single press, significantly reducing preparation time.

• Durable Construction: Crafted from heavy-duty cast aluminum, ensuring longevity and consistent performance in busy kitchen environments.

• Ergonomic Design: Features a short-throw handle that enhances leverage, allowing for smooth, effortless cutting and minimizing operator fatigue.

• Versatile Use: Ideal for preparing not only potatoes but also onions, peppers, celery, and other firm fruits and vegetables.

• Flexible Mounting Options: Equipped with pre-drilled holes in the sturdy legs, facilitating easy attachment to tables or walls for gravity-assisted operation.

• Easy Maintenance: The blade assembly is easily removable, simplifying cleaning and allowing for quick replacement when necessary.

Q&A

Q: What is the Nemco 55450-4 Easy FryKutter?
A: The Nemco 55450-4 Easy FryKutter is a manual wedger that cuts potatoes into 4 uniform wedges with a single stroke, making it ideal for high-efficiency kitchens.

Q: What size wedges does it cut?
A: This model cuts potatoes into 4 wedges, perfect for making wedge fries.

Q: What is it made from?
A: The cutter is constructed with a cast aluminum body and stainless steel blades, ensuring durability and ease of maintenance.

Q: Can the cutter be mounted?
A: Yes, it can be mounted on a countertop or wall, depending on your kitchen setup and space requirements.

Q: What are the dimensions of the cutter?
A: The Nemco 55450-4 measures 8 inches in width, 12.5 inches in depth, and 15.5 inches in height, with a weight of about 12 lbs.

Maintenance Tips

• Regular Cleaning:

• After Each Use:

• Remove the push block by loosening the thumb screws.

• Unscrew the wing nuts to detach the blade and holder assembly.

• Carefully separate the blade holder and push block.

• Wash all components with warm water and mild detergent.

• Avoid using abrasive cleaners to prevent damage.

• Deep Cleaning (Periodically):

• Disassemble the blade holder by removing the thumb screws and blade holder plate.

• Gently tap out the blades and spacers for thorough cleaning.

• Reassemble by reversing the disassembly steps.

• Lubrication:

• Apply Nemco-recommended lubricant to the guide rods and pins at each joint to ensure smooth operation.

• Avoid using cooking oils, as they can cause buildup and impair functionality.

• Mounting and Installation:

• Wall Mounting:

• Position the machine on the wall where desired, ensuring it's over a wall stud.

• Mark the 4 mounting hole locations.

• Drill 5/32" diameter holes at the marked locations.

• Drive the mounting screws with washers through the mounting holes in the unit and into the wall.

• Ensure the machine is mounted on a sturdy wall to prevent it from falling during use.

• Table Mounting:

• Select a solid, sturdy table or work surface.

• Position the machine and mark the 4 mounting hole locations.

• Drill 5/32" diameter holes at the marked locations.

• Drive the mounting screws with washers through the mounting holes in the unit and into the table.

• Operational Tips:

• Use a natural body motion when operating the lever to reduce strain and increase efficiency.

• Only process produce that fits within the cutter's capacity to prevent damage.

• Ensure hands and fingers are away from the cutting area during operation