Noritz EZTR40 120,000 BTU Tankless Water Heater - HCNAC1010-NG
Noritz EZTR40 120,000 BTU Tankless Water Heater - HCNAC1010-NG
Noritz EZTR40 120,000 BTU Tankless Water Heater - HCNAC1010-NG
Noritz EZTR40 120,000 BTU Tankless Water Heater - HCNAC1010-NG
Noritz EZTR40 120,000 BTU Tankless Water Heater - HCNAC1010-NG
Noritz EZTR40 120,000 BTU Tankless Water Heater - HCNAC1010-NG
Noritz EZTR40 120,000 BTU Tankless Water Heater - HCNAC1010-NG
Noritz EZTR40 120,000 BTU Tankless Water Heater - HCNAC1010-NG
Noritz EZTR40 120,000 BTU Tankless Water Heater - HCNAC1010-NG

Noritz EZTR40 120,000 BTU Tankless Water Heater - HCNAC1010-NG

Free Shipping
80 Peoples are also watching that product.
Vendor: NORITZ
SKU: HCNAC1010-NG
$2,178.99
$2,318.00
$2,178.99
Fuel Type: Natural Gas
Subtotal: $2,178.99
authorized dealer, shop your favorite brand.
Expert Support,

Dial 888-575-2099

Limited Supply,

grab it before it's gone.

Lowest prices,

As low as possible.

All Item are brand New,

Never used.

Recently Viewed Products

Noritz EZTR40 120,000 BTU Tankless Water Heater - HCNAC1010-NG

The EZTR40 vents with flexible vent directly through existing B‐Vent with no need to spend time changing existing vent. Water connections are on the top of the heater so now you can use flex lines direct from the top like a tank. 1/2 inch gas line connection to existing line saves time and money.

It is designed to easily convert your 30/40 gallon tank type water heater to tankless technology. This heater can be installed on gas lines as small as 1/2" (120,000 BTUH maximum requirement). The EZTR flows up to 6.6 gallons per minute and is Energy Star listed.

  • Standard Input‐ Gas consumption ranges from 15,000 BTUh to 120,000 BTUh

  • Capacity Range‐ Flow rates from 0.5 GPM up to 6.6 GPM

  • Compact Design‐ ANSI Z21.10.3/CSA 4.3 certified design for indoor wall‐mounting

  • Durable Steel Casing with Polyester Coating

  • Venting Options‐ Indoor venting only. N‐Flex Kit (included) is designed for the installation inside of B‐Vent as a sleeve

  • Direct Electronic Ignition

  • Uniform Energy Factor (UEF) ‐ 0.87(NG) /0.87(LP)

  • Temperature Controls‐ Includes built in display that can preset the output temperature to either 120°F, 135°F, or 140°F

  • Power Cord Installation Kit‐ 6' power cord is included and attached

  • Safety Devices‐ Flame Sensor, Overheat Prevention Device, Lighting Protection Device, Freeze Protection, Condensate Overfill, Fan Rotation Detector

  • Additional Features ‐ Temperature Lockout, High Elevation Adjustment

Case Stainless Steel
Direct Electronic Ignition Yes
Energy Star Yes
Finish Family Stainless Steel
Flow Rate @ 35 ºF Rise 5.5 gpm
Flow Rate @ 45 ºF Rise 4.9 gpm
Flow Rate @ 75 ºF Rise 2.8 gpm
Flow Rate, Maximum 6.6 gpm
Hard-Wired Remote Yes
Heat Exchanger Warranty 15 Year year
Indoor/Outdoor Indoor
Labor Warranty 1 Year
Lightning Protection Yes
Maximum Temperature 140 ºF
Min. Installation Clearance, Front 4 Inch
Min. Installation Clearance, Sides 3 Inch in
Min. Installation Clearance, Top 12 Inch in
Minimum Activation Rate 0.5 gpm
Must ship freight Yes
Parts Warranty 5 Year Limited Parts Warranty
Product Depth 9.4 in
Product Height 27.2 in
Product Shipping Weight 50 lb
Product Width 18.33 in
Recirculation compatible Yes
Shipping Cost 140
Shipping Time 24 to 72 hours
Thermal Efficiency 0.93 %
Unit Type (Selector) Standard
Warranty 15 Year Limited Heat Exchange year
Water Connection Location Top
Water Connection Size 3/4 Inch in
Water Pressure Range, Min-Max 15-150 psig
Wattage 129 W

 

 

 

Related Products

Recently Viewed Products