Get In Touch
Get In Touch +1 (888) 575-2099
Dial +1 (888) 575-2099
grab it before it's gone.
As low as possible.
Never used.
The Quatro SolderPure line of Fume extractors are specially designed to source capture solder smoke & fumes before they migrate throughout your workshop.
This is the Quatro SolderPure SWS/RP Combo (Solder/Waxing/Smoke-Rhodium Fumes/Plating Fumes) Fume Extractor.
SolderPures are available in 3 models:
147.630 SPB-560-1T-K combination unit, for doing both Solder/Waxing/Smoke and Rhodium/Plating fumes SWS/RP. Contains 2 Charcoal filters. Added filter reduces CFM rating.
147.628 SPB-560-1BK for removing soldering, waxing smoke and odors. This is the Quatro SolderPure SWS (Solder/Waxing/Smoke) Fume Extractor.
147.629 SPB-560-1R-K for removing rhodium/plating fumes
SolderPures have a 3 stage filtering system with the final stage containing a special 2" thick charcoal filter. This Solder/Waxing/Smoke fume Extractor contains the standard charcoal filter. The Rhodium/Plating fume extractor contains the special ammonia charged charcoal filter.
SolderPures do not need to be vented, as they are 99.9% efficient in removing harmful smoke and odors from the workplace. SolderPures are mounted on casters for shop mobility. Noise is not a problem as the whisper quite SolderPure operates at only 52 dba. This Combination SolderPure is rated at 125 CFM. Single charcoal filter SolderPures are rated at 170 CFM. Using 2 charcoal filters back to back, as this combo unit does, reduces the CFM as compared to single charcoal filter units.
SolderPures have 2 ports on top (photo shows one with a red cover cap, the other with the included Quatro AA006 Flex Extraction Arm with Slide Valve) so you can set up a two different fume collection stations.
This Combo SolderPure has this filter configuration:
147.610D Quatro F074 HEPA Filter
147.629C Quatro F072-BPC Charcoal Rhodium Filter*
147.628C Quatro F072-GPC Charcoal Solder/Waxing/Smoke Filter*
147.628E Quatro F069-220 SolderPure Filter Pad
*These charcoal filters are refillable. No need to buy complete charcoal replacement filters. Simply purchase the charcoal refill of your choice. Each refill contains enough material for 5 refills.
This SolderPure includes the following accessories:
Install your SolderPure near your fume source. Clamp the 3" diameter fume hose to one of the inlets and the other end attach to Quatro 147.6006 Table Bracket. Then attach the hard plastic flexible extraction arm with the hood to the Table Bracket. Place the hood as close as you can near, preferable over, the fume source.
You can purchase additional Extraction Arms as needed either as supplied (Quatro AA006, Otto Frei 147.631E) or in a complete kit with the Table Bracket and hose, Quatro AA008, Otto Frei part no. 147.631.
SolderPures can be attached to an optional foot pedal,#AA175 , for turning off and on, or the mc2 automatic control box, part number 147.633, that can make your flex shaft foot control (or other piece of equipment like a foot controled wax pen) an on/off switch for the SolderPure. The SolderPure measures 20" high by 12-3/4" wide by 15-3/4" deep and has a shipping weight of 56 lbs and is standard 115V/60C.
The Quatro SolderPure Combo Solder/Rhodium Fume Extractor - 110V - SPB-560-1T-K is a versatile and powerful fume extraction solution designed for a wide range of applications. Here's why it's a top choice for professionals:
Ideal for jewelers, electronics technicians, and metalworkers, this fume extractor combines efficiency, safety, and reliability, making it a valuable tool in any professional workshop.
Q: What is the Quatro SolderPure Combo Fume Extractor used for?
A: This fume extractor is designed to capture and filter harmful fumes generated during soldering and rhodium plating processes, ensuring cleaner air and a safer workspace for professionals.
Q: What industries benefit from using this fume extractor?
A: It's ideal for electronics manufacturing, jewelry making (particularly during rhodium plating), dental labs, and other environments where soldering or metal plating occurs.
Q: What power supply does the unit require?
A: The Quatro SolderPure Combo operates on 110V power, making it suitable for most standard electrical outlets in domestic and commercial settings.
Q: How does the SolderPure Combo improve air quality?
A: The unit uses advanced filtration systems, including pre-filters and HEPA filters, to capture both larger particles and microscopic contaminants from the air, reducing exposure to harmful fumes.
Q: Is the SolderPure Combo suitable for both soldering and rhodium plating fumes?
A: Yes, it is specifically designed to handle fumes from both soldering tasks and rhodium plating processes, making it versatile for various applications.
Q: How portable is the SolderPure Combo?
A: The unit features a compact design that allows for easy transport between workstations, offering flexibility in different work environments.
Q: Is the fume extractor easy to maintain?
A: Yes, the unit requires minimal maintenance. Regular cleaning and filter replacement are necessary to ensure optimal performance and longevity.
Q: How loud is the SolderPure Combo during operation?
A: The SolderPure Combo is designed to operate quietly, minimizing noise disruptions while efficiently filtering fumes from the work area.
Q: Can the SolderPure Combo handle continuous use in professional environments?
A: Yes, it is built for continuous use and is durable enough to handle the demands of a busy workshop or industrial setting.
Q: Does it require professional installation?
A: No, the SolderPure Combo is designed for easy setup. It can be installed by the user with basic assembly instructions.
Q: What is the filter replacement schedule for this unit?
A: The filters should be checked regularly and replaced when needed, depending on the intensity of use. Typically, this may be every 6-12 months.
Q: Does the SolderPure Combo come with a warranty?
A: Most Quatro products include a warranty against manufacturer defects. It's recommended to confirm the exact warranty details with the seller or manufacturer.
Filter Maintenance:
Inspect Airflow Paths:
Clean the Unit Exterior:
Monitor the Motor:
Power Connection Safety:
Adjust Suction Settings Appropriately:
Avoid Overloading:
Ventilation and Placement:
Schedule Routine Inspections:
Thanks for subscribing!
This email has been registered!
The Quatro SolderPure line of Fume extractors are specially designed to source capture solder smoke & fumes before they migrate throughout your workshop.
This is the Quatro SolderPure SWS/RP Combo (Solder/Waxing/Smoke-Rhodium Fumes/Plating Fumes) Fume Extractor.
SolderPures are available in 3 models:
147.630 SPB-560-1T-K combination unit, for doing both Solder/Waxing/Smoke and Rhodium/Plating fumes SWS/RP. Contains 2 Charcoal filters. Added filter reduces CFM rating.
147.628 SPB-560-1BK for removing soldering, waxing smoke and odors. This is the Quatro SolderPure SWS (Solder/Waxing/Smoke) Fume Extractor.
147.629 SPB-560-1R-K for removing rhodium/plating fumes
SolderPures have a 3 stage filtering system with the final stage containing a special 2" thick charcoal filter. This Solder/Waxing/Smoke fume Extractor contains the standard charcoal filter. The Rhodium/Plating fume extractor contains the special ammonia charged charcoal filter.
SolderPures do not need to be vented, as they are 99.9% efficient in removing harmful smoke and odors from the workplace. SolderPures are mounted on casters for shop mobility. Noise is not a problem as the whisper quite SolderPure operates at only 52 dba. This Combination SolderPure is rated at 125 CFM. Single charcoal filter SolderPures are rated at 170 CFM. Using 2 charcoal filters back to back, as this combo unit does, reduces the CFM as compared to single charcoal filter units.
SolderPures have 2 ports on top (photo shows one with a red cover cap, the other with the included Quatro AA006 Flex Extraction Arm with Slide Valve) so you can set up a two different fume collection stations.
This Combo SolderPure has this filter configuration:
147.610D Quatro F074 HEPA Filter
147.629C Quatro F072-BPC Charcoal Rhodium Filter*
147.628C Quatro F072-GPC Charcoal Solder/Waxing/Smoke Filter*
147.628E Quatro F069-220 SolderPure Filter Pad
*These charcoal filters are refillable. No need to buy complete charcoal replacement filters. Simply purchase the charcoal refill of your choice. Each refill contains enough material for 5 refills.
This SolderPure includes the following accessories:
Install your SolderPure near your fume source. Clamp the 3" diameter fume hose to one of the inlets and the other end attach to Quatro 147.6006 Table Bracket. Then attach the hard plastic flexible extraction arm with the hood to the Table Bracket. Place the hood as close as you can near, preferable over, the fume source.
You can purchase additional Extraction Arms as needed either as supplied (Quatro AA006, Otto Frei 147.631E) or in a complete kit with the Table Bracket and hose, Quatro AA008, Otto Frei part no. 147.631.
SolderPures can be attached to an optional foot pedal,#AA175 , for turning off and on, or the mc2 automatic control box, part number 147.633, that can make your flex shaft foot control (or other piece of equipment like a foot controled wax pen) an on/off switch for the SolderPure. The SolderPure measures 20" high by 12-3/4" wide by 15-3/4" deep and has a shipping weight of 56 lbs and is standard 115V/60C.
The Quatro SolderPure Combo Solder/Rhodium Fume Extractor - 110V - SPB-560-1T-K is a versatile and powerful fume extraction solution designed for a wide range of applications. Here's why it's a top choice for professionals:
Ideal for jewelers, electronics technicians, and metalworkers, this fume extractor combines efficiency, safety, and reliability, making it a valuable tool in any professional workshop.
Q: What is the Quatro SolderPure Combo Fume Extractor used for?
A: This fume extractor is designed to capture and filter harmful fumes generated during soldering and rhodium plating processes, ensuring cleaner air and a safer workspace for professionals.
Q: What industries benefit from using this fume extractor?
A: It's ideal for electronics manufacturing, jewelry making (particularly during rhodium plating), dental labs, and other environments where soldering or metal plating occurs.
Q: What power supply does the unit require?
A: The Quatro SolderPure Combo operates on 110V power, making it suitable for most standard electrical outlets in domestic and commercial settings.
Q: How does the SolderPure Combo improve air quality?
A: The unit uses advanced filtration systems, including pre-filters and HEPA filters, to capture both larger particles and microscopic contaminants from the air, reducing exposure to harmful fumes.
Q: Is the SolderPure Combo suitable for both soldering and rhodium plating fumes?
A: Yes, it is specifically designed to handle fumes from both soldering tasks and rhodium plating processes, making it versatile for various applications.
Q: How portable is the SolderPure Combo?
A: The unit features a compact design that allows for easy transport between workstations, offering flexibility in different work environments.
Q: Is the fume extractor easy to maintain?
A: Yes, the unit requires minimal maintenance. Regular cleaning and filter replacement are necessary to ensure optimal performance and longevity.
Q: How loud is the SolderPure Combo during operation?
A: The SolderPure Combo is designed to operate quietly, minimizing noise disruptions while efficiently filtering fumes from the work area.
Q: Can the SolderPure Combo handle continuous use in professional environments?
A: Yes, it is built for continuous use and is durable enough to handle the demands of a busy workshop or industrial setting.
Q: Does it require professional installation?
A: No, the SolderPure Combo is designed for easy setup. It can be installed by the user with basic assembly instructions.
Q: What is the filter replacement schedule for this unit?
A: The filters should be checked regularly and replaced when needed, depending on the intensity of use. Typically, this may be every 6-12 months.
Q: Does the SolderPure Combo come with a warranty?
A: Most Quatro products include a warranty against manufacturer defects. It's recommended to confirm the exact warranty details with the seller or manufacturer.
Filter Maintenance:
Inspect Airflow Paths:
Clean the Unit Exterior:
Monitor the Motor:
Power Connection Safety:
Adjust Suction Settings Appropriately:
Avoid Overloading:
Ventilation and Placement:
Schedule Routine Inspections: