Tamarack Solar 2.3 Rail 93IN Black 8 Rail Kit (8 modules with widths of up to 46) - 90507

Tamarack Solar 2.3 Rail 93IN Black 8 Rail Kit (8 modules with widths of up to 46) - 90507

Save Time and Money

Tamarack Solar Rail Kit is an attractive black rail mounting system provides easy installation, simple wire management, and great strength all in a single box.

• Kit contains all parts required to mount 8 modules with widths of up to 46-inches in portrait orientation
• 2.3-inch rail height for spans up to 10 feet and wind speed up to 180 MPH
• Module clamps included in kits fit frame thickness of 30mm to 40mm; additional clamps available for modules with thicker frames
• UPS shippable
• * Total length of a single row of modules is 372-inches.

Best Wire Management - PV cables and wiring for module-level electronics fits inside rails to avoid time consuming wire management.

Use Any Roof Attachments - Included L-feet mount to Tamarack composition shingle flashings, S-5! metal roof clamps or any roof attachment that can be used with a 5/16 inch bolt.

One Wrench Size - Install with ease and minimal tools. A 1/2-inch socket fits all fasteners.

UL 2703 Listed - All components meet UL standards and have Class A Fire Rating for Type 1 and 2 modules.

Tamarack Flush Mount 93-inch Rail Kit Install Eight PV Modules

Black Coated Rails

Attractive low-profile mounting of up to eight modules with four-foot roof attachment spacing. Certified for up to 180 MPH wind speed and 120 PSF snow load. Eight 93-inch rails included.

5050 Clamp

One clamp can be used as a mid-clamp or an end-clamp on modules with 30 mm to 40 mm frame height. 20 clamps included.

Channel End Clamp

This end clamp replaces the 50/50 clamp at the end of the row of modules for better aesthetics. It is your choice which part to use. 8 clamps included. MLPE Adapter Use this adapter for mounting microinverters and optimizers on the rails under the modules. Use one adapter for each device. 8 adapters included.

Push-On End Cap

Caps give the rail system a finished look while allowing drainage. 8 caps included. Wire Management Clip Clips can be pushed into top of rail to keep cables in place. 24 clips included. Tamarack Flush Mount 93-inch Rail Kit Install Eight PV Modules

Ground Lug

Use one per module row to ground rail with bare 6 to 10 AWG copper wire. 4 Ground Lugs included.

Push-In Bonding Rail Splice

Quickly splice and bond rail sections with no tools or fasteners. Top Clamps and Rail Mounts can be co- located with splice. 8 splices are included.

Rail Mount and L-Foot

Quickly and securely mount the rail from either side, to Tamarack composition shingle flashings, S-5! metal roof clamps or any roof attachment that can be used with a 5/16 inch bolt. 16 mounts and L-feet included.

Push-On End Cap

Caps give the rail system a finished look while allowing drainage. 8 caps included.

Wire Management Clip

Clips can be pushed into top of rail to keep cables in place. 24 clips included.

Tamarack Solar Rail Kit and L-Foot

Quickly and securely mount the rail from either side, to Tamarack composition shingle flashings, S-5! metal roof clamps or any roof attachment that can be used with a 5/16 inch bolt. 16 mounts and L-feet included.

MLPE Adapter

Use this adapter for mounting microinverters and optimizers on the rails under the modules. Use one adapter for each device. 8 adapters included.

Still Have Questions? Give us a call today 1-877-242-2792