Victron Energy MultiPlus 12/3000 - 120-50 - 230V - VE.Bus - PMP123021010 - CW86166

Victron Energy MultiPlus 12/3000 - 120-50 - 230V - VE.Bus - PMP123021010 - CW86166

ak functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.

The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater, for example, can be connected to this output (a second output is available on models rated at 3 kVA and more).

Virtually Unlimited Power Thanks to Parallel Operation

Up to 6 Multis can operate in parallel to achieve a higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 AMP charging capacity.

Three Phase Capability

In addition to parallel connections, three units of the same model can be configured for three-phase output. But that’s not all up to 6 sets of three units can be connected in parallel for a 75 kW / 90 kVA inverter and more than 2000 Amp charging capacity.

PowerControl - Dealing with Limited Generator, Shore Side or Grid Power

The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shoreside supply (nearly 10 A per 5 kVA Multi at 230 VAC). With the Multi Control Panel, a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.

PowerAssist - Boosting the capacity of shore or generator power

This feature takes the principle of PowerControl to a further dimension. It allows MultiPlus to supplement the capacity of the alternative source. Where peak power is often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces the spare power is used to recharge the battery.

• In the case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure

• Parallel and three-phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software

• Off-grid, grid-interactive, and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications)

• On-site Monitoring and Control

  Several options are available: Battery Monitor, Multi Control Panel, Color control for GX or other GX devices, smartphone, tablet (Bluetooth Smart), laptop, or computer (USB or RS232).

• Remote Monitoring and Control

  Color Control GX or other GX devices. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.

  When connected to the Ethernet, systems with a Color Control GX or otherGX device can be accessed, and settings can be changed remotely

• Powerful Combination: Features a 3000VA inverter and a 120A battery charger, ideal for larger energy setups.
• VE.Bus Integration: Enables smart connectivity with Victron systems for advanced monitoring and control.
• Pure Sine Wave Output: Ensures stable power for sensitive electronics and appliances.
• Adaptive Charging: Optimizes battery charging with multi-stage algorithms to extend battery life.
• Uninterrupted Power: Automatic switching between inverter, shore, or generator power for continuous energy supply.

Q: What is the Victron Energy MultiPlus 12/3000 Inverter/Charger (PMP123021010)?
A: A powerful 12V inverter/charger providing 3000VA output, 120A charging, and seamless functionality for off-grid and backup systems.

Q: What are its key features?
A:

• Inverter Output: 3000VA for powering high-demand AC appliances.
• Battery Charger: 120A multi-stage charging for efficient battery management.
• VE.Bus Compatibility: Allows parallel and three-phase system setups.
• Uninterrupted Power Supply: Automatic transfer switch ensures seamless transition between grid and inverter power.
• Versatile Input: Supports 230V configurations.

Q: Who is it ideal for?
A: Best suited for RVs, boats, off-grid setups, and home backup systems requiring higher power output.

Q: Why choose this inverter/charger?
A: It combines robust performance, efficient charging, and advanced system scalability for reliable energy management

• Check Connections: Inspect terminals and cabling for tight, corrosion-free connections.
• Monitor System: Use the VictronConnect app or VE.Bus interface to track system performance and adjust settings.
• Clean Vents: Regularly clear dust from vents to maintain optimal cooling.
• Update Firmware: Keep firmware updated through VE.Bus for new features and performance improvements.
• Verify Load Limits: Operate within the rated capacity (3000W) to avoid overloading.
• Secure Installation: Mount in a dry, ventilated area away from moisture, extreme heat, and vibrations.
• Test Periodically: Conduct periodic load tests to ensure consistent performance and reliability.