Greenlee 6900 Puller Package with Greenlee UT10-2S Ultra Tugger & Greenlee 00865 Floor Mount - Reconditioned - 6900
Greenlee 6900 Puller Package with Greenlee UT10-2S Ultra Tugger & Greenlee 00865 Floor Mount - Reconditioned with a
The Ultra Tugger 10,000-pound puller has two speeds and can shift from high speed to low speed with a double-tap motion on the foot pedal. High speed can pull up to 16 feet per minute up to 4,000 pounds, while low speed can pull 8,000 pounds at 9 feet per minute. The capacity peaks at 10,000 pounds at a rate of 6 feet per minute
What our Experts Think
Q&A
Q: What is the Greenlee 6900 Puller Package used for?
A: A heavy-duty cable pulling system designed for electrical, utility, and industrial installations requiring high-force pulling of large conductors through conduit and raceways.
Q: What is included in the package?
A: The package includes the Greenlee UT10-2S Ultra Tugger® cable puller and the Greenlee 00865 floor mount, providing a complete floor-mounted cable pulling solution.
Q: What is the maximum pulling capacity?
A: The UT10-2S delivers up to 10,000 lbs. momentary pulling force, with continuous-duty operation up to 6,500 lbs. and intermittent operation up to 8,000 lbs.
Q: What makes the UT10-2S unique?
A: It features a two-speed motor that switches between high-speed and high-force modes with a simple double-tap of the foot pedal, allowing faster and more versatile cable pulls.
Q: What are the pulling speeds?
A: High speed operates at up to 16 ft/min no-load and is ideal for loads up to 4,000 lbs., while low speed operates at 9 ft/min no-load and handles loads up to 8,000 lbs. with peak capacity reaching 10,000 lbs.
Q: What are the electrical requirements?
A: The standard model operates on 115V power and requires a 20-amp circuit for operation.
Q: What are its key features?
A: Features include an onboard force gauge, removable foot pedal, quick setup in under two minutes, rugged motor construction, and compatibility with demanding cable-pulling applications.
Q: What does “reconditioned” mean?
A: A reconditioned unit has been inspected, tested, and restored to full operating condition. Cosmetic wear or repainting may be present, but performance and functionality are maintained.
Maintenance Tips
- Inspect puller, Ultra Tugger, and floor mount before each use for wear or damage
- Clean motor housing, frame, and mounting surfaces regularly to remove dirt and debris
- Check pulling rope, connectors, and attachment points for fraying or excessive wear
- Lubricate moving parts and bearings according to manufacturer recommendations
- Verify all bolts, fasteners, and mounting hardware are tight and secure
- Inspect electrical cords, plugs, and controls for cuts, cracks, or heat damage
- Test emergency stop and control functions before operation
- Keep ventilation openings clear to prevent motor overheating
- Monitor for unusual noise, vibration, or reduced pulling performance during use
- Inspect reconditioned components regularly for signs of accelerated wear
- Store equipment in a clean, dry environment when not in use
- Do not exceed rated pulling capacity to prevent equipment damage
- Replace worn ropes, hardware, and components promptly for safe operation
- Use only manufacturer-approved replacement parts and accessories
Damage 
Loss 
Theft 
![Chery Industrial [BARGAIN] 20ft Farm Metal Driveway Gate with Diagonal Tubes - A_IF000054](http://backyardprovider.com/cdn/shop/files/farmgatewith_31.png?v=1775546952)
![Chery Industrial [BARGAIN] 7' Garage Storage Cabinets with 20 Drawers - A_WW000208](http://backyardprovider.com/cdn/shop/files/bargain-7-ft-work-bench-with-20-drawers_30.png?v=1775546940)
