Greenlee 6901 Puller Package with Greenlee UT10-2S Ultra Tugger & Greenlee 02846 Chain Mount - Reconditioned - 6901
Greenlee 6901 Puller Package with Greenlee UT10-2S Ultra Tugger & Greenlee 02846 Chain Mount - Reconditioned with
The Ultra Tugger 10,000-pound puller has two speeds and can shift from high speed to low speed with a double-tap motion on the foot pedal. High speed can pull up to 16 feet per minute up to 4,000 pounds, while low speed can pull 8,000 pounds at 9 feet per minute. The capacity peaks at 10,000 pounds at a rate of 6 feet per minute
What our Experts Think
Q&A
Q: What is the Greenlee 6901 Puller Package used for?
A: It is a heavy-duty cable pulling system that combines the Greenlee UT10-2S Ultra Tugger® and Greenlee 02846 Chain Mount, designed for pulling electrical cable through conduit in commercial, industrial, and utility installations.
Q: What is included in the package?
A: The package includes a UT10-2S Ultra Tugger cable puller and a 02846 Chain Mount for secure jobsite setup.
Q: What is the pulling capacity?
A: The UT10-2S delivers up to 10,000 lbs peak pulling force, with continuous-duty operation up to 6,500 lbs and intermittent operation up to 8,000 lbs.
Q: What makes the UT10-2S unique?
A: It features a two-speed motor that switches between high-speed/low-load and low-speed/high-load pulling with a simple double-tap of the foot pedal.
Q: What are the pulling speeds?
A: High speed reaches 16 ft/min with no load, while low speed is optimized for heavier pulls, handling up to 8,000 lbs at approximately 6 ft/min.
Q: What power does it require?
A: The standard UT10-2S package operates on 115V, 20-amp power.
Q: What does “Reconditioned” mean?
A: A reconditioned unit has been inspected, refurbished, tested, and restored to full operating condition. Cosmetic wear or repainting may be present, but functionality is maintained.
Maintenance Tips
- Inspect the puller, chain mount, and all accessories before each use for signs of wear, damage, or loose hardware
- Check power cord, plug, and electrical connections regularly for cuts, fraying, or exposed wiring
- Keep motor housing and ventilation openings clean and free of dust, dirt, and debris to prevent overheating
- Inspect pulling rope, hooks, chains, and connectors for wear, deformation, or damage before every pull
- Verify chain mount components are securely fastened and free from excessive wear or corrosion
- Lubricate moving parts and bearings as recommended to ensure smooth operation and reduce component wear
- Tighten loose bolts, nuts, and mounting hardware periodically to maintain safe operation
- Clean the unit after each use to remove jobsite dust, moisture, and contaminants that can affect performance
- Store equipment in a dry, protected location to prevent corrosion and electrical damage
- Monitor pulling force and never exceed rated capacity to avoid motor, gearbox, or mounting system damage
- Inspect rope feed and capstan surfaces regularly for excessive wear that could reduce pulling efficiency
- Test controls and emergency stop functions before operation to ensure proper response and safety
- For reconditioned equipment, inspect repaired components more frequently to verify continued reliability
- Remove the unit from service immediately if unusual noise, vibration, overheating, or performance issues occur
Damage 
Loss 
Theft 
![Chery Industrial [BARGAIN] 20ft Farm Metal Driveway Gate with Diagonal Tubes - A_IF000054](http://backyardprovider.com/cdn/shop/files/farmgatewith_31.png?v=1775546952)
![Chery Industrial [BARGAIN] 7' Garage Storage Cabinets with 20 Drawers - A_WW000208](http://backyardprovider.com/cdn/shop/files/bargain-7-ft-work-bench-with-20-drawers_30.png?v=1775546940)
