Greenlee 6906 Puller Package with Greenlee UT10-2S Ultra Tugger & Mobile VersiBoom - Reconditioned - 6906 00359 MVB
The Ultra Tugger 10,000-pound puller has two speeds and can shift from high speed to low speed with a double-tap motion on the foot pedal. High speed can pull up to 16 feet per minute up to 4,000 pounds, while low speed can pull 8,000 pounds at 9 feet per minute. The capacity peaks at 10,000 pounds at a rate of 6 feet per minute
The Mobile VersiBoom can be extended up to 20ft or use the 3ft boom for tighter spaces. The unit is easy to store and transport and can be folded up in less than 2 minutes and can be stored on the back of a pick-up truck
What our Experts Think
Q&A
Q: What is the Greenlee 6906 Puller Package used for?
A: A heavy-duty commercial cable pulling system designed for installing large electrical conductors through conduit in industrial, commercial, and utility construction projects.
Q: What is included in this package?
A: It combines the Greenlee UT10-2S Ultra Tugger cable puller with a Mobile VersiBoom system and adapters, creating a complete portable high-force pulling setup.
Q: What is its pulling capacity?
A: Delivers up to 10,000 lbs maximum pulling force, with continuous operation up to 6,500 lbs and higher-load intermittent/momentary capability up to 8,000β10,000 lbs depending on duty cycle.Β
Q: What makes the VersiBoom system important?
A: The Mobile VersiBoom enables fast setup (under ~2 minutes), improves cable alignment, and provides flexible jobsite positioning without permanent anchoring.
Q: What are the power requirements?
A: Typically operates on 115V, 20-amp electrical supply, suitable for standard jobsite temporary power setups.
Q: What are the key benefits?
A: Improves pulling speed, reduces manual labor, enhances safety with force monitoring, and increases productivity on large-scale cable installations.
Maintenance Tips
- Inspect Ultra Tugger, Mobile VersiBoom, and all components before each use
- Check pulling rope, capstan, and fittings for fraying, wear, or deformation
- Clean motor housing, frame, and boom structure regularly to remove dirt and debris
- Ensure VersiBoom is fully stabilized, leveled, and locked before operation
- Lubricate moving joints, pivot points, and wear surfaces as recommended
- Verify all pins, bolts, and locking mechanisms are tight and secure
- Inspect electrical cords, plugs, and controls for damage or overheating signs
- Test emergency stop and control functions before every pull
- Keep ventilation openings clear to prevent motor overheating
- Monitor for unusual vibration, noise, or reduced pulling performance
- Do not exceed rated pulling capacity to prevent equipment failure
- Store equipment in a clean, dry environment when not in use
- Inspect reconditioned components frequently for accelerated wear or fatigue
- Replace worn ropes, pins, and accessories immediately for safe operation
Damage 
Loss 
Theft 
![Chery Industrial [BARGAIN] 20ft Farm Metal Driveway Gate with Diagonal Tubes - A_IF000054](http://backyardprovider.com/cdn/shop/files/farmgatewith_31.png?v=1775546952)
![Chery Industrial [BARGAIN] 7' Garage Storage Cabinets with 20 Drawers - A_WW000208](http://backyardprovider.com/cdn/shop/files/bargain-7-ft-work-bench-with-20-drawers_30.png?v=1775546940)
