Greenlee 8018 Hook Sheave 18 in. - Reconditioned - 8018

Greenlee 8018 Hook Sheave 18 in. - Reconditioned - 8018

Outside Diameter: 18" (457.2 mm)

Inside Radius: 7" (177.8 mm)

Width: 6" (152.4 mm)

Maximum Rated Capacity: 8,000 lbs. (35.8 kN)

For use with any Greenlee cable puller.

Strong, welded steel frames.

Forged steel closure type hooks with 1" (25.4 mm) opening.

Aluminum alloy with self-lubricating bearings.

What our Experts Think

Q&A

Maintenance Tips

• Inspect the sheave wheel before each use for cracks, chips, excessive wear, or deformation
• Check the hook for bending, twisting, corrosion, or other signs of structural damage
• Verify that the hook safety latch operates correctly and closes completely before lifting operations
• Keep the groove of the sheave clean and free of dirt, wire fragments, and debris to reduce cable wear
• Lubricate bearings and moving components periodically according to service requirements for smooth rotation
• Rotate the sheave by hand during inspections to ensure free movement without binding or unusual noise
• Inspect axle pins, retaining hardware, and fasteners regularly for looseness or wear
• Clean the unit after use to remove mud, dust, moisture, and jobsite contaminants
• Store in a clean, dry environment to minimize corrosion and extend service life
• Check for excessive groove wear that could damage rope, cable, or pulling line during operation
• Never exceed the rated load capacity, as overloading can damage the hook, bearings, and sheave assembly
• Inspect lifting and rigging components before every job and remove the unit from service if cracks or structural defects are found
• Apply rust-prevention lubricant to exposed metal surfaces when stored for extended periods
• For reconditioned units, inspect repaired or refurbished areas more frequently to verify continued safe operation
• Maintain a regular preventive maintenance schedule to ensure safe performance and maximize equipment lifespan