Greenlee 910 Spindle Wire Dispenser - Reconditioned - Greenlee 910
All welded steel construction Includes two (2) fixed and two (2) swivel locking heavy-duty casters
The spool rack consists often (10) spindles and an adjustable guide loop, and can be turned 360 degrees independent of the base
Spindles are angled to contain reels and act as a brake while paying out wire
Fits through a 36 IN (915 mm) opening
What our Experts Think
Q&A
Q: What is the Greenlee 785 Hydraulic Bender used for?
A: It is used for bending EMT, IMC, and rigid conduit in electrical installations with hydraulic power for precision and reduced effort.
Q: What conduit sizes does the Greenlee 785 support?
A: It typically handles ½" to 4" EMT, IMC, and rigid conduit depending on shoe set configuration.
Q: Is this unit new or reconditioned?
A: This listing is for a reconditioned unit that has been inspected, tested, and restored to working condition.
Q: Does it come with bending shoes?
A: It may include selected shoes depending on the package; additional shoe sets can be purchased separately.
Q: What type of power source does it require?
A: The Greenlee 785 operates using a compatible hydraulic pump system (electric or gas-powered pump depending on setup).
Q: Is it suitable for professional job sites?
A: Yes, it is designed for heavy-duty commercial and industrial electrical conduit bending applications.
Q: What are the advantages of a hydraulic bender?
A: It provides consistent bends, reduces manual effort, and improves accuracy for large conduit sizes.
Maintenance Tips
- Inspect hydraulic hoses, fittings, and cylinders before each use for leaks or cracks
- Check hydraulic fluid level regularly and top off with approved fluid as needed
- Wipe down unit after use to remove dirt, oil, and debris buildup
- Keep bending shoes and forms clean and free of metal shavings
- Lubricate pivot points and moving parts according to manufacturer guidelines
- Verify ram alignment and smooth extension/retraction before operation
- Tighten all bolts, pins, and frame connections before each job
- Inspect reconditioned hydraulic components frequently for wear or leakage
- Bleed air from hydraulic system if inconsistent pressure or movement occurs
- Store unit in a dry, clean environment to prevent corrosion
- Do not exceed rated bending capacity for conduit size and material
- Check control valve operation for smooth and accurate response
- Replace worn seals or hoses immediately to prevent hydraulic failure
Damage 
Loss 
Theft 
![Chery Industrial [BARGAIN] 20ft Farm Metal Driveway Gate with Diagonal Tubes - A_IF000054](http://backyardprovider.com/cdn/shop/files/farmgatewith_31.png?v=1775546952)
![Chery Industrial [BARGAIN] 7' Garage Storage Cabinets with 20 Drawers - A_WW000208](http://backyardprovider.com/cdn/shop/files/bargain-7-ft-work-bench-with-20-drawers_30.png?v=1775546940)
