Curtron SPD-30-AL-GK-DBL-7884 78" x 84" Service-Pro Series 30 Double Swing Door - CUSPD30ALGKDBL7884
The Curtron SPD-30-AL-GK-DBL-7884 Service-Pro Swing Door creates a barrier between customers and kitchens, stock rooms, and warehouses to reduce noise. It is made of .032" tempered aluminum and has a satin anodized finish. The SPD-30-AL-GK-DBL-7884 comes with a full perimeter gasket and a 3/4" exterior grade solid wood core. It has two 39" x 84" door panels and two 9" x 14" windows. The Swing Door comes with a Save-T hinge assembly and bottom pin. It does not come with a kickplate or impact plate.
FeaturesÂ
- (2) 39" x 84" door panels
- .032" tempered aluminum with satin anodized finish exterior and full perimeter gasket
- 0.750" exterior grade solid wood core
- (2) 9" x 14" clear windows
- No kickplate / impact plate
- Save-T hinge assembly and bottom pin
Specifications
- Model: SPD-30-AL-GK-DBL-7884
- Dimensions: 84" H x 78" W
- Approximate Weight: 255 lbs.
What our Experts Think
-
Generous Opening Size: Two panels provide a total opening of 78″ wide × 84″ high, ideal for busy service corridors, equipment access, or medium-traffic zones.
-
Durable Series 30 Construction: 0.750″ moisture-resistant composite core with full-perimeter gasketing, built for medium-duty traffic like personnel or push-cart use.
-
Finish & Hardware: Aluminum-faced (“AL”) finish offers a sleek, clean appearance; “GK” denotes enhanced guard/kit components such as impact plates and reinforced hardware.
-
Safety & Visibility: Each panel includes a 9″ × 14″ clear window to improve sight-lines and reduce collisions in two-way traffic areas.
-
Installation Considerations: Ensure proper structural header support, sufficient swing clearance on both sides, and enough maneuvering space for carts or equipment.
Q&A
Q: What is the SPD‑30‑L‑GK‑DBL‑7884 model?
A: A double‑leaf swing door from Curtron’s Service‑Pro Series 30, designed for commercial interiors with moderate‑duty traffic and frequent access.
Q: What are its dimensions and configuration?
A: Measures approximately 78″ wide × 84″ high, with two 39″‑wide panels that swing in both directions for efficient two‑way traffic.
Q: What are its construction and material features?
A: Made with a 0.750″ thick moisture‑resistant composite wood core, laminate or aluminum exterior finish (depending on customization), full‑perimeter gasket sealing for better isolation, and optional vision windows and kickplates for durability.
Q: What environments is this door best suited for?
A: Ideal for restaurant back‑of‑house entrances, food‑service corridors, convenience store service zones, or any interior commercial area where frequent two‑way access and durability are required.
Q: What installation checks should you perform before purchase?
A: Confirm that your rough opening accommodates 78″ width × 84″ height, ensure there is enough clearance for both panels to swing, verify the frame and threshold match the door’s gasket and hinge design, and select the correct finish and hardware for your specific environment.
Maintenance Tips
-
Lubricate Hinges and Pivots: Apply lubricant regularly to maintain smooth double-swing motion.
-
Clean Door Surfaces: Wipe aluminum surfaces with a soft cloth and mild detergent to prevent buildup.
-
Inspect Gaskets and Seals: Ensure gaskets are clean and intact for proper insulation and energy efficiency.
-
Tighten Hardware: Periodically check screws, bolts, and mounting components for stability.
-
Check Alignment: Adjust doors if swings are uneven to reduce hinge stress and maintain smooth operation.
