Only a few left—secure yours before it’s gone for good!
Your items are reserved, but only for a limited time!
Grab it now at a discounted price before the deal ends!
$0.00 USD
$0.00 USD
$0.00 USD
$0.00 USD
$0.00 USD
$0.00 USD
$0.00 USD
Durable and easy to use, the Curtron SPD-30-L-GK-DBL-5496 is a Service-Pro Series 30 Swing Door. It is made of .032" tempered aluminum and has a laminate finish. The Swing Door has an 0.750" exterior grade solid wood core and a full perimeter gasket. It comes with an 18" stainless steel kickplate, Save-T hinge assembly, and bottom pin. The SPD-30-L-GK-DBL-5496 has two 27" x 96" door panels and two 9" x 14" windows.
Generous Opening Size: Two panels provide a full 54″ wide × 96″ high opening, ideal for busy service corridors or equipment access.
Robust Construction: Laminated exterior over a 0.750″ exterior‑grade solid wood core with full perimeter gasket for durability and basic sound/air control.
Built-In Visibility: Each panel includes a 9″ × 14″ clear window to improve safety and sight-lines in high-traffic areas.
Heavy-Use Hardware: “GK” indicates guard/kit features (e.g., kickplates or impact protection) suitable for frequent pedestrian and cart traffic.
Installation Considerations: Ensure sufficient clearance, proper header support, and unobstructed swing paths due to the door’s height and double-swing design.
Q: What is the SPD‑30‑L‑GK‑DBL‑5496?
A: A double-leaf swing door from Curtron’s Service‑Pro Series 30, designed for commercial interiors where moderate-duty traffic and separation are required.
Q: What are its dimensions and configuration?
A: Measures approximately 54″ wide × 96″ high, with two 27″ × 96″ panels that swing both directions for convenient two-way access.
Q: What are its construction and material features?
A: Features tempered aluminum exterior with laminate finish, 0.750″ exterior-grade wood core, full-perimeter gasket sealing, 9″ × 14″ clear windows, and stainless steel kickplates for durability.
Q: What environments is this door best suited for?
A: Ideal for restaurant back-of-house entrances, food-service prep areas, convenience store service doors, or other commercial interiors requiring frequent swing access and durability.
Q: What should installers verify before ordering?
A: Confirm the rough opening fits 54″ W × 96″ H, ensure full swing clearance for both panels, check frame, threshold, and gasket compatibility, and select hardware and finish appropriate for the facility.
Lubricate Hinges and Pivots: Apply lubricant regularly to maintain smooth double-swing operation.
Clean Door Surfaces: Wipe with a soft cloth and mild detergent to remove dirt and prevent buildup.
Inspect Gaskets and Seals: Ensure gaskets are clean and intact for proper insulation and energy efficiency.
Tighten Hardware: Periodically check screws, bolts, and mounting components for stability.
Check Alignment: Adjust doors if swings are uneven to reduce hinge stress and maintain smooth operation.