HEATSTAR 80,000 BTU Indirect Fired Utility Industrial Heater w/ NG To LP Conversion Kit - F160561

HEATSTAR 80,000 BTU Indirect Fired Utility Industrial Heater w/ NG To LP Conversion Kit - F160561

If you are looking to turn your garage or barn into a work space you can use all year-round, you will have to find a safe quiet and reliable heat source. This 80,000 BTU Natural Gas Unit heater is the way to go. It uses a built-in electric high velocity fan to pull cool air into the rear of the heater, across a heat exchanger, then forcing warm air into the surrounding areas. These heaters only require 115v AC power and can be vented vertically or horizontally - please check local codes and restrictions. With a mounting clearance of only 1 inch, the supplied brackets, external access to power, and thermostat connections - installation is a cinch. With the Durable Spark ignition and robust factory standard self-diagnostic control module, we can offer a 3 year factory warranty on all parts and burners and a 10 year warranty on any defects in the heat exchanger. This heater offers the operating versatility and safety that you have come to expect from HeatStar.HeatStar Forced Air Natural Gas Unit Heater is efficient and effective convection heat for your garage or workshop for residential or commercial use.

Features

• 80,000 BTU per hour
• For use with natural gas
• Heats up to 2,667 square feet
• Spark ignition features self-diagnostic control module
• Includes 2 angle brackets for ceiling mount
• Low Profile Design - Can be installed in low-ceiling buildings
• Minimum 8ft clearance from floor to base of heater required
• 1/2in gas connection
• Category 1 vertical, category 3 horizontal venting
• Natural Gas to Liquid Propane conversion kit included

What our Experts Think

• Robust Heating Performance – Delivers 80,000 BTU per hour of indirect‑fired heat, capable of warming spaces up to ~2,667 sq ft such as garages, workshops, or barns.

• Dual‑Fuel Flexibility – Ships with an NG to LP conversion kit, allowing use with natural gas or propane based on your setup.

• Efficient Forced‑Air Warmth – High‑velocity fan pushes heated air across the aluminized steel heat exchanger into the space for consistent comfort.

• Easy & Versatile Installation – Low‑profile design mounts in low‑ceiling buildings and supports both vertical and horizontal venting for installation flexibility.

• Reliable Ignition & Control – Electronic spark ignition paired with a self‑diagnostic control module enhances dependability and safety.

Q&A

Q: What is this heater?
A: A 50 Hz/115 VAC indirect fired utility heater delivering 80,000 BTU/hour of warm air, ideal for heating garages, workshops, barns, and other utility spaces.

Q: How much space can it heat?
A: Designed to heat areas up to approximately 2,667 sq ft, depending on insulation and local conditions.

Q: What fuel options are supported?
A: Ships set for natural gas (NG) and includes a natural gas to liquid propane (LP) conversion kit, giving flexible fuel choices for varied installations.

Q: How does it work?
A: A high‑velocity fan pulls cool air across a heat exchanger, then distributes forced warm air into the space. A spark ignition with self‑diagnostic control ensures reliable starts.

Q: What installation features does it include?
A: Comes with mounting brackets for easy ceiling installation, a low‑profile design for low ceilings, and supports both vertical or horizontal venting (check local codes).

Maintenance Tips

1. Keep Air Inlets & Vents Clear – Remove dust and debris from the air intake, exhaust, and fan guards regularly to ensure proper airflow and efficient heat exchange. A blocked vent reduces performance and can strain components.

2. Inspect Burners & Ignition – With the heater off and cool, check the spark ignition area and burners for soot or buildup; gently clean with a soft brush to help reliable starts and consistent heating.

3. Check Gas Connections – Periodically inspect natural gas and propane fittings for secure connections and leaks; tighten connections when converting fuel types.

4. Monitor Venting System – Ensure the exhaust vent and any Category I/III venting runs stay unobstructed and properly aligned so combustion products are safely expelled.

5. Fan & Motor Care – Keep the built‑in fan clean and free from debris for efficient air movement; unplug power before any cleaning or adjustments.

6. Dry & Dust‑Free Storage – When not in use, protect the heater from moisture and dust by covering it or storing in a dry area to reduce corrosion and extend service life.