Hessaire DXW6100 CFM Front Discharge Window Evaporative Cooler - he14186
Add fresh air to your home or office with this Hessaire Window Evaporative Cooler. Ideal for dry climates, this unit installs directly into a window similar to the way a window air conditioner does.
Simple to operate, this evaporative swamp cooler has three cooling fan speeds, a high speed fan-only option, and can cool up to 2,000 square feet.
Powerful Cooling
The Hessaire DXW6100 Window Evaporative Cooler features a direct drive axial motor to deliver up to 6100 CFM of airflow.
- A 5052 aircraft aluminum prop features a swept design for high static and low dB noise
- Aluminum extrusion frame motor for superior heat dissipation and corrosion resistance
- Submersible permanent magnet sealed-rotor pump provides dependable service
- Standard ¼-inch float valve
This cooler has 80% evaporative efficiency thanks to the hi-density media, and the rigid media pads last 3-5 years.
For optimum operation, this window cooler needs sufficient air openings for the area being cooled, such as an open door or window.
Summary
The Hessaire DXW6100 Window Evaporative Cooler brings 6100 CFM of airflow to hot, dry spaces up to 2,000 sq. ft. Install in a window or through a wall. Durable hi-density media, lightweight UV-resistant casing, and fan-only option help create a fresh, cool environment.
Installation Options
Whether it’s your apartment, a family room, workshop, or garage, the DWX6100 is easily installed using one of two options.
-
Window Installation: Insert the fan duct part of the cooler through the window, then on the outside, the tank part of the cooler fastens to the wall through the designated screw holes on the bottom.
-
Through-Wall Installation: Construct a rough-in opening approximately 22.5 x 22.5 inches through the wall (a contractor may be needed for this). Then insert the fan duct through the opening—the telescoping neck adjust to accommodate wall thickness. Fasten to the outside as for window installation.
Evaporative Cooler Dimensions
-
Fan Duct (Inside Air Vent): 21.625 H x 21.625 x 10 D inches (Neck is telescoping)
-
Cabinet (Outside Tank): 35.5 H x 29.25 x 16.75 D inches
Features
-
Control Functions: Fan & Pump On High Speed; Fan & Pump On Low Speed; Fan Only on Low Speed; Fan Only on High Speed
-
Washable Media: Remove the rigid media pads for cleaning using a soft brush and vinegar if necessary.
-
UV-Resistant Polypropylene Housing: This light-weight, durable housing caries a lifetime warranty.
-
Energy Efficient: This unit pulls only 3.6 amps on high and 2.9 amps on low, saving up to 75% over refrigerated air systems.
-
Air Filtration: The hi-density media also filters particles as it cools.
What our Experts Think
-
Industrial-grade cooling power — Delivers 11,000 CFM airflow, moving massive volumes of cool moisture across up to ~3,000 sq ft, perfect for large garages, warehouses, run-off events, barns, and commercial spaces.
-
Exceptional value with refurbishment — Factory-refurbished unit backed by a one-year limited warranty, offering like-new performance at a lower cost than a new MC92V model.
-
User-friendly & versatile — Dual water fill options (manual or continuous hose hookup), easy dials for fan speed/pump/oscillation, and adjustable louvers help tailor airflow and cooling where you need it.
-
Built-for rugged use — Large 32.8 gallon water reservoir, heavy-duty pads, oscillating design, and caster wheels support long runtime, broad coverage, and easy mobility.
-
Energy-efficient operation — Runs on modest power (≈460 W) with low operating costs (~$0.05/hour), balancing high flow with economical performance.
-
Best in dry climates — As with all evaporative coolers, peak performance occurs in low-humidity environments; in humid regions, cooling feels less effective and adds moisture to the air.
-
Ideal for demanding spaces — Experts highlight its strength for industrial, commercial, and large open spaces where standard fans or small coolers can’t compete.
Q&A
Q: What cooling performance does the Hessaire MC92V-R deliver?
A: Offers 11,000 CFM airflow, powerful enough to cool large industrial and commercial spaces up to 3,000 sq ft.
Q: What environments is this cooler best suited for?
A: Ideal for warehouses, garages, outdoor venues, kennels, and manufacturing areas needing rugged, high-capacity cooling.
Q: What makes this model refurbished?
A: It’s a manufacturer-refurbished unit, restored to factory standards with full function, often at a lower price than new.
Q: How is water supplied to the cooler?
A: Two fill options: continuous water fill via garden hose or manual tank fill, with a 32.8-gallon reservoir for extended runtime.
Q: What controls and features does it include?
A: Simple dial controls, oscillating louvers, adjustable airflow direction, and casters for easy mobility.
Q: Is it safe for outdoor wet conditions?
A: Yes — includes a GFCI safety plug that shuts off power if an electrical fault is detected.
Q: Does it come with cooling pads?
A: Yes — includes three hi-density washable Xel50 cooling pads for improved evaporation efficiency.
Maintenance Tips
-
Always unplug before maintenance or cleaning
-
Clean cooling pads regularly to remove dust, debris & mineral scale
-
Drain and flush water tank weekly to prevent buildup & odors
-
Use fresh water; avoid stagnant water when idle
-
Deep clean pads monthly with mild detergent or vinegar solution
-
Inspect pump, float valve, hoses, and seals for leaks or wear
-
Replace worn pads to preserve airflow and cooling efficiency
-
Keep air intake and vents clear for optimal 11,000 CFM performance
-
Store dry after season; fully drain tank and dry pads before storage
-
Operate with good ventilation (open windows/doors) for best cooling effect
Damage 
Loss 
Theft 
