Husqvarna Banner Line Blue 200B Diamond Blades - 542751031

Husqvarna Banner Line Blue 200B Diamond Blades - 542751031

Features

• For general purpose soft to medium-hard aggregate with light steel reinforcing
• Design of the segment provides a reduced contact surface in the concrete
• Gives a quick start in a controlled manner, when applying a new blade
• Total segment height is .390" (.315" diamond depth; .075" segment base)
• 26" and larger blades have wide notch segments
• For wet cutting only

What our Experts Think

• Constant water supply without extras
  Provides a steady pressurized water flow (≈0.5–0.7 bar / 7–10 psi) ideal for concrete cutting, core drilling, and grinding, without needing a pump, battery, electronics or manual pumping.

• Portable & jobsite‑ready
  Compact 14 L capacity with a 3 m reinforced hose and lightweight design (~6 kg dry) makes it easy to carry, set up and reposition — perfect where mains water access is limited.

• Reliable dust suppression & tool cooling
  Steady water supply helps cool diamond blades/bits and suppress harmful silica dust, improving cut quality, prolonging tooling life, and enhancing operator safety.

• Simple, low‑maintenance solution
  No pumps, batteries or electronics means higher reliability with fewer breakdowns and minimal maintenance — ideal for frequent use or remote sites.

• Versatile compatibility
  Works with a wide range of Husqvarna cutters and core drills (disc saws, handheld drills and drill rigs), giving professionals flexibility on mixed jobs.

Q&A

Q: What is the Husqvarna WT2GO Pressurized Water Tank?
A: A compact, portable constant‑pressure water tank designed to supply water for wet cutting, core drilling, and concrete grinding without needing a pump, battery, or electronics.

Q: What are the key specs of model 598742401?
A: It holds ~14 L (≈3.7 gal) of water, delivers ~7–10 psi constant pressure, includes a 3 m reinforced hose and nozzle, and weighs about 6 kg (empty) — making it easy to carry and operate on jobsites.

Q: Why use WT2GO on job sites?
A: It provides a steady water flow for dust suppression and blade cooling during concrete cutting, drilling, and grinding — especially where direct water access or hoses are impractical.

Q: How does it work without a pump?
A: The tank uses a constant‑pressure design with internal chambers, supplying reliable water flow without pumps, batteries, or electronics for simpler operation and fewer failure points.

Q: What tools does it fit?
A: Compatible with many Husqvarna tools including power cutters and core drills for effective wet cutting and dust control.

Q: How does WT2GO benefit operators?
A: Lightweight and portable, it lets operators work in areas without onsite water supply and improves dust suppression compliance on construction and renovation jobs.

Maintenance Tips

• Clean hose & fittings before use — flush any debris to maintain smooth water flow.

• Check all connections and seals before each job to avoid leaks.

• Use only clean water; avoid soaps, chemicals, or additives inside the tank.

• Avoid over‑pressurizing when filling (don’t exceed max rated pressure).

• Depressurize before storage or maintenance to protect seals and valves.

• Empty and rinse the tank after use, especially if left full for long periods.

• Inspect the hose regularly for cracks or wear; replace if damaged.

• Store dry and protected from extreme temperatures and direct sunlight.

• Do not attempt internal repairs; contact an authorized technician for service.

• Use genuine replacement parts to maintain performance and safety.