Penta 24″ Hot Surface Electronic Ignition System - PENTA24EI-120VAC-NG

Penta 24″ Hot Surface Electronic Ignition System - PENTA24EI-120VAC-NG

Enhance your fire pit experience with our Penta 24″ Hot Surface Electronic Ignition System.

1. Start Up: This is done by use of a wall switch or remote control. When the ON command is received, the system completes initial safety checks then starts flow of pilot gas. After 5 seconds the hot surface igniter glows igniting pilot flame. When the system confirms pilot flame present, the main burner gas will flow ignited by the pilot flame. 
2. Operation: While enjoying the ambiance of your fire pit, the system is at work monitoring flame status, internal temperatures / voltages and other safety parameters. If flame loss does occur, the system will turn off all gas flow, and then restart by automatically commencing Start sequence.
3. Shut Down: To turn OFF the fire pit simply use wall switch, remote control or whole house system.

Features:

• Fully Assembled- ready to install. Control components are protected within valve box.
• Start via wall switch, remote or whole house system; auto re-light if flame is lost.
• Ignition is complete using a robust and reliable Hot Surface igniter.
• On/Off models: Use with optional wall switch or Remote Control available.
• High/Low Flame Control Models: Adjust high setting to low setting- ~45% turn down (Remote Control included).
• 120vac: Standard outdoor grounded power cord- simply plug into GFCI outlet.
• 24vac Option: Typically used pool side or with other lower voltage requirements.
• Natural Gas or Liquid Propane: Factory built & tested for either fuel.
• Internal temperature monitoring with overheat auto shutoff.
• CSA Certified in US & Canada to ANSI Z21.97-2014 / CSA 2.41-2014 requirements.
• Optional Controls: On/Off Remote, Timers, Power Supplies and an Emergency Shutoff.

What Our Experts Think

• 24″ Penta‑style burner with hot surface electronic ignition for reliable, consistent flame start‑up.

• Durable, professional‑grade construction for residential and commercial fire pits.

• Provides even flame distribution and efficient heat output.

• Designed for safety, energy efficiency, and long‑lasting outdoor performance.

• Ideal for compact, custom fire pit installations.

Q&A

• Q: What fuel does it use?
  A: Natural gas (NG) connection required.

• Q: Is it compatible with Penta fire pits?
  A: Yes, engineered for 24″ Penta burner setups; verify dimensions before installation.

• Q: Is professional installation recommended?
  A: Yes, for safe gas hookup and optimal ignition performance.

Maintenance Tips

• Inspect burner and gas connections regularly.

• Keep burner surface and pan free of debris.

• Clean with mild soap and water; avoid harsh chemicals.

• Protect from harsh weather when not in use.

• Follow manufacturer guidelines for hot surface ignition system care.